Restore Your Chevy Volt’s Functionality with a Plug-and-Play BCM
Are you battling bizarre electrical issues in your 2011 Chevrolet Volt? Flickering lights, unresponsive power windows, or a car that refuses to start can all point to a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, and when it falters, it can cause a cascade of frustrating and seemingly unrelated problems. Instead of facing a costly trip to the dealership for a new module and complex programming, our professional cloning service offers a direct, reliable, and affordable solution.
We make the process simple. You send us your original BCM, and our expert technicians will transfer all the critical vehicle-specific data—including VIN, mileage, and key information—to this fully tested replacement module. We then ship the programmed unit back to you, ready for installation. This means no additional programming, no security relearn procedures, and no surprise dealership fees. It’s the most efficient way to get your 2011 Volt BCM replaced and your car back to perfect working order.
From the Diagnostic Bay: The Case of the Intermittent Volt
A customer brought in a 2011 Volt with a truly baffling set of symptoms. The car would intermittently fail to power on, the radio would randomly shut off, and the interior lights would flicker. They had already replaced the 12V battery, but the problems persisted. My initial scan showed a slew of communication errors (U-codes) between various modules. After tracing the CAN bus network, I suspected the BCM was the culprit, acting as a noisy node and disrupting communication. By providing a cloned BCM, we restored stable communication across the entire vehicle network. The car started reliably, and all the strange electrical gremlins vanished. It’s a classic example of how a failing BCM can mimic a dozen other problems.
Common Signs of a Failing GM BCM
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ Vehicle’s anti-theft or security system malfunctioning.
- ✔ Instrument cluster gauges behaving erratically or going dark.
- ✔ A no-start condition where the engine doesn’t crank.
- ✔ Diagnostic trouble codes (DTCs) related to communication loss (e.g., U0100, U0140) or internal module failure.
A Straightforward Guide to Our Cloning Service
- ✔ Place Your Order: Purchase this BCM cloning service. We will contact you with shipping instructions for your original module.
- ✔ Ship Us Your Module: Carefully remove the original BCM from your vehicle and send it to us. The BCM in a 2011 Volt is typically located in the right-hand (passenger side) of the engine compartment.
- ✔ Expert Cloning Process: Upon receipt, our technicians will perform a full data transfer from your original BCM to this replacement unit.
- ✔ Final Checks: Start your vehicle and verify that all functions are restored. In some cases, minor post-installation procedures may be needed.
Verified Vehicle Compatibility
This BCM is a direct fit for a wide range of General Motors vehicles. Please match your part number to ensure compatibility. This module is interchangeable with part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451.
- Buick LaCrosse: 2011, 2012
- Buick Regal: 2011
- Cadillac SRX: 2011, 2012
- Chevrolet Camaro: 2011 (Convertible)
- Chevrolet Cruze: 2012
- Chevrolet Equinox: 2011
- Chevrolet Orlando: 2012
- Chevrolet Volt: 2011, 2013
- GMC Terrain: 2011
Note: Location of the BCM varies by model. Always confirm the location in a service manual for your specific vehicle.
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some vehicle systems may require recalibration after the BCM is replaced. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed using a professional-grade scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light operation and to prevent issues with the traction control system.
We stand by our work, but it’s always best practice to consult a factory service manual or a qualified technician if you encounter any issues. And remember, there is no core charge for this service. You can keep your original module.
Frequently Asked Questions
2011 Volt BCM
Is this a guaranteed fix for my car’s electrical problems?
This service corrects issues directly caused by a faulty BCM. While a failing is a common cause of many electrical problems, it’s crucial to have the vehicle properly diagnosed. We guarantee our cloning service and the functionality of the module we send you.