Restore Your Volt’s Electrical System with a Hassle-Free Solution
Is your 2011 Chevrolet Volt acting possessed? Flickering lights, malfunctioning power windows, a security system that won’t cooperate, or strange warning messages on the dash are all classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can turn your daily drive into a frustrating ordeal. Dealerships will often quote you a fortune for a new module plus expensive programming fees. We offer a smarter, more affordable path forward.
This is a comprehensive programming service for your 2011 Volt BCM. You simply send us your original module, and our expert technicians will transfer all the critical data—including VIN, immobilizer information, and vehicle-specific settings—to this fully tested replacement unit. We then ship it back to you, ready for installation. This process eliminates the need for any additional programming or trips to the dealer, getting you back on the road quickly and confidently.
A Technician’s Notebook: The Case of the Erratic Volt
A few months back, a 2011 Volt was towed into my bay with a laundry list of complaints from the owner. The interior lights would pulse randomly, the radio would shut off, and the car intermittently wouldn’t recognize the key fob. A quick scan revealed a slew of U-codes (communication errors) pointing to the BCM. Instead of a costly new unit and a day tied up with programming, we used our cloning service. We had the customer’s original BCM overnighted, cloned it to a replacement module, and sent it back. The customer installed it in under an hour, and every single electrical gremlin was gone. It’s a testament to how effective this solution is for complex modern vehicles.
Common Signs of a Failing BCM
If your vehicle is experiencing any of the following, a failing BCM is the likely culprit. This service is designed to resolve these exact issues:
- ✔ Erratic or non-functional interior and exterior lights (headlights, dome lights, etc.).
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ Vehicle security system faults or alarm sounding unexpectedly.
- ✔ Key fob not being recognized or intermittent remote start issues.
- ✔ False warning lights on the instrument cluster.
- ✔ Communication error codes, particularly U-codes like U0140, stored in the system.
- ✔ Wipers or horn activating on their own or not working at all.
A Straightforward Guide to Installation
Our service makes the repair process simple. Once you receive the pre-programmed module from us, the physical swap is all that’s left. For the 2011 Volt, the BCM is located in the engine compartment on the right-hand (passenger) side.
- Service First: After your purchase, we will contact you with instructions to ship your original BCM to our facility. We handle all the programming here.
- Safety First: Before starting the installation, always disconnect the negative terminal from your vehicle’s 12V battery and secure it away from the post to prevent accidental reconnection.
- Locate the BCM: Open the hood and find the BCM in the right-hand (passenger side) of the engine compartment. It’s typically housed in a protective case or bracket.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Press the release tabs firmly to avoid damaging them. Once disconnected, unbolt the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and secure it. Reconnect all electrical connectors, ensuring they click firmly into place.
- Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all functions: lights, locks, windows, radio, etc., to confirm the repair.
Post-Installation Verifications
In some cases, your vehicle may require a final sync procedure after the new 2011 Volt BCM is installed. This is normal and can be performed with a compatible high-level scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure the brake lights and stability control systems function as intended.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.
Verified Vehicle Compatibility
This BCM is a direct-fit replacement for a wide range of GM vehicles and is compatible with the following part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451.
It fits the following models (please verify the part number on your original module):
- Buick LaCrosse: 2011, 2012
- Cadillac SRX: 2011, 2012
- Chevrolet Camaro: 2011 (Convertible)
- Chevrolet Cruze: 2012
- Chevrolet Equinox: 2011
- Chevrolet Orlando: 2012
- Chevrolet Volt: 2011, 2013
- GMC Terrain: 2011
- Buick Regal: 2011
Frequently Asked Questions
How does the cloning service work?
After you place your order, we’ll provide shipping instructions for you to send us your original BCM. We then use specialized equipment to read the unique data from your module and write it onto the replacement unit. This ensures it’s a perfect match for your car’s configuration.
Do I need to program this BCM after I receive it?
No. The module arrives pre-programmed and ready for installation. Our service completely eliminates the need for expensive dealership programming, making it a true plug-and-play solution.
What if my original module is completely dead or not communicating?
In many cases, even if the module is non-functional in the vehicle, we can still extract the necessary data. If for some reason your module’s data is irretrievable, we will contact you to discuss options, which may include a full refund.
Is there a core charge for my old BCM?
No, there is no core charge. After we clone the data, you can keep your original module.
Will this fix my specific electrical problem?
This programmed BCM is designed to fix issues directly caused by a faulty module, such as the symptoms listed above. It’s crucial to properly diagnose the issue first, as problems like a bad ground or wiring harness can mimic BCM failure.
How long does the entire process take?
Typically, we program and ship the replacement module the same day we receive your original. The total turnaround time will depend on shipping speeds to and from our facility. We will provide a tracking number as soon as it ships.