Is Your Vehicle Plagued by Electrical Gremlins?
If you’re dealing with flickering lights, malfunctioning power windows or locks, a security system that acts on its own, or even a no-start condition, the culprit is often a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can cause a wide range of frustrating and unpredictable issues. Instead of facing a costly trip to the dealership for a new module and expensive programming, our professional cloning service offers a simple, reliable, and affordable solution.
From the Diagnostic Bay
We recently had a 2011 GMC Terrain in the shop with a classic case of BCM failure. The owner reported that the radio would randomly change stations, the interior dome lights would stay on, and the key fob worked intermittently. After confirming the BCM was the source of the problem, we explained the options. A new module from the dealer would have meant days of downtime and a bill well over a thousand dollars after programming. Instead, we performed our cloning service. We transferred the data from his faulty BCM to a replacement unit. The customer had his vehicle back the next day with all electrical systems functioning perfectly, saving him significant time and money.
Common Symptoms of a Failing BCM
- âś” Intermittent or non-working power windows, door locks, or mirrors.
- âś” Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- âś” The security system or alarm randomly activating or preventing the car from starting.
- âś” Inconsistent operation of windshield wipers or radio controls.
- âś” False warnings or error messages appearing on the instrument cluster.
- âś” A complete no-start condition where the ignition seems dead.
The Perfect Solution: A Pre-Programmed 2011 Regal BCM
Our service is designed to be the easiest way to solve your BCM problems. We take a replacement BCM, compatible with part number 13500384 and others, and flash it with the exact data from your vehicle’s original module. This includes the VIN, key fob information, and specific settings for your car’s options. The result is a true plug-and-play module that requires no additional programming upon installation.
How The Process Works:
- âś” Place Your Order: Complete your purchase through our secure checkout.
- âś” We Contact You: We will reach out with clear, simple instructions for shipping your original BCM to our facility.
- âś” Ship Your Module: Send us your original BCM. Once we receive it, our technicians get to work.
- âś” Cloning Service: We expertly transfer all the critical data from your original module to the replacement unit.
- âś” Return Shipping: We ship your original module and the newly programmed replacement back to you, typically within 1-2 business days of receipt.
Installation and Post-Install Procedures
Once you receive the module, installation is straightforward. Simply disconnect the battery, remove the old BCM (typically located in the driver’s side dash or kick panel), and install the replacement. While our programming makes this a plug-and-play process, some vehicle systems may require a simple relearn procedure after the new module is connected.
- Airbag System Sync: In some cases, the airbag warning light may illuminate after installation. This is resolved by performing a ‘Setup SDM Primary Key in BCM’ procedure with a professional scan tool to sync the systems. This is only necessary if the light is on.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration might be needed to ensure correct brake light and traction control operation. This is also done with a compatible diagnostic tool and may be required depending on your specific model.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Guaranteed Fitment for Multiple Models
This BCM is a direct replacement for several GM vehicles and part numbers, including:
- Part Numbers: 13577850, 13505326, 13500384, 13574844, 13504004, 13504494, 13578420
- Buick Regal (2011)
- Chevrolet Cruze (2011, 2013)
- Chevrolet Equinox (2010)
- GMC Terrain (2010, 2011)
- Cadillac SRX (2010)
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle that controls and monitors a wide range of electronic accessories not related to the engine, such as power windows, locks, lights, wipers, and the security system.
Why is this cloning service better than buying a new BCM?
Our service saves you hundreds of dollars by eliminating the need for dealership programming. A new BCM from the dealer is a blank slate and requires expensive, specialized tools to program it to your car’s VIN and options. Our module arrives ready to install.
How long does the programming service take?
We typically complete the data transfer and ship your modules back out within 1-2 business days of receiving your original BCM.
Do I need to do any programming myself?
No. The main benefit of our service is that the replacement BCM is fully programmed with your car’s data before it arrives. It is a plug-and-play installation, though minor relearn procedures for systems like the airbag or brake sensor may be needed in some cases.
What if my original BCM is completely dead or unreadable?
In cases of severe water or fire damage, data recovery may not be possible. Please contact us before ordering if you suspect your module is physically destroyed or unreadable so we can discuss potential options.