Programmed 2011 Equinox BCM Body Control Module 13501737

Fix Your Vehicle’s Electrical Problems!

Get a plug-and-play solution for your faulty Body Control Module. Our mail-in cloning service transfers your vehicle’s essential data to this replacement BCM, eliminating the need for a dealer visit. Restore your lights, locks, and starting system. Order today for a simple, effective repair!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Restore Full Electrical Function to Your Vehicle

Are you battling frustrating electrical issues in your 2011 Chevy Equinox or another compatible GM vehicle? Symptoms like flickering lights, malfunctioning power windows and locks, a faulty security system, or even a car that refuses to start can often be traced back to a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, and when it fails, it can cause a wide range of unpredictable problems. This listing offers a straightforward, reliable solution: a replacement BCM, programmed specifically for your vehicle using the data from your original module.

The Simple, No-Hassle Solution for Your 2011 Equinox BCM

Forget expensive dealership visits and the complexities of programming a new module from scratch. Our unique cloning service makes this repair as simple as possible. We transfer the vital, vehicle-specific information—including VIN, mileage, and key data—from your original BCM directly onto this replacement unit. The result is a true plug-and-play module that is ready for installation the moment you receive it, restoring your vehicle’s functions without the need for additional programming or calibration at a shop.

Expert Pro Tip

Expert Pro Tip

Before condemning your BCM, always perform a thorough check of your vehicle’s battery and primary ground connections. A weak battery, loose terminals, or a corroded ground strap can mimic the symptoms of a faulty BCM, causing widespread electrical gremlins. Verifying these basic components first can save you significant time and money in diagnostics.

Common Symptoms of a Failing BCM

  • ✔ Intermittent or non-functional interior and exterior lights (headlights, dome lights, dash lights).
  • ✔ Power windows, door locks, or mirrors operating erratically or not at all.
  • ✔ The anti-theft or security system light is on, preventing the engine from starting.
  • ✔ Wipers or radio turning on and off by themselves.
  • ✔ False warnings or error messages appearing on the instrument cluster.
  • ✔ Complete loss of communication with other vehicle modules, leading to a no-start condition.

How Our Programming Service Works

Our process is designed for your convenience and to ensure a perfect match for your vehicle.

  1. Place Your Order: Complete your purchase through our secure checkout.
  2. We’ll Contact You: We will reach out to you with clear, simple instructions and the shipping address for sending us your original BCM. Please ensure your contact information is up to date.
  3. Ship Your Original Module: Carefully package and ship your original BCM to our facility.
  4. We Clone the Data: Upon receipt, our technicians will expertly extract the data from your module and flash it onto the replacement unit.
  5. Receive Your Ready-to-Install BCM: We ship the newly programmed BCM back to you, typically within 1-2 business days. We will provide you with tracking information so you know exactly when it will arrive.

Installation and Post-Install Notes

Physical installation is straightforward. The BCM is typically located on the driver’s side, behind the kick panel or under the dash. Simply disconnect the battery, remove the old module, plug in the new one, and reconnect the battery. However, in some cases, minor electronic ‘re-learning’ procedures may be necessary:

  • Airbag System Sync: If the airbag warning light appears after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required. This syncs the new BCM with the airbag system and must be done with a professional-grade scan tool.
  • Brake Pedal Position Relearn: On certain models, a brake pedal position sensor recalibration may be needed to ensure correct operation of the brake lights and stability control systems.

Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Guaranteed Fitment for Multiple Part Numbers

This BCM is a direct replacement for a wide range of GM vehicles and part numbers. If your original module has any of the following numbers, this part is compatible:

Part Numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451

Fits Models Including:

  • 2011-2012 Buick LaCrosse
  • 2011-2013 Chevrolet Volt
  • 2011-2012 Cadillac SRX
  • 2011 GMC Terrain
  • 2011 Chevrolet Equinox
  • 2011 Chevrolet Camaro (Convertible)
  • 2012 Chevrolet Cruze
  • 2012 Chevrolet Orlando
  • 2011 Buick Regal

Frequently Asked Questions

Expert Pro Tip

Before condemning your BCM, always perform a thorough check of your vehicle’s battery and primary ground connections. A weak battery, loose terminals, or a corroded ground strap can mimic the symptoms of a faulty BCM, causing widespread electrical gremlins. Verifying these basic components first can save you significant time and money in diagnostics.

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2012

Model

EQUINOX

Make

Brand

GM

MPN

13501737

Manufacturer Part Number

, , , , , , , , , , ,

Manufacturer Warranty

1 Year

Scroll to Top