Restore Your Camaro’s Electrical System with a Plug-and-Play Solution
Are you battling frustrating and unpredictable electrical problems in your 2011 Chevrolet Camaro or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows, a dead instrument cluster, or a car that refuses to start can often be traced back to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of confusing symptoms. This isn’t just an inconvenience; it can affect vehicle security and safety systems. Forget expensive dealership visits and towing fees. Our professional cloning service provides you with a fully programmed BCM, ready for simple, direct installation.
A Technician’s Notebook: The Camaro with a Mind of Its Own
A few months back, a 2011 Camaro convertible was brought into my bay with a list of symptoms that sounded like a poltergeist had taken up residence. The owner reported the radio would turn on by itself, the driver’s side window would randomly drop an inch, and worst of all, the anti-theft system would occasionally engage, leaving him stranded. He’d already replaced the battery to no avail. My initial scan showed a flurry of communication error codes, specifically a U0140 (Lost Communication With Body Control Module). This pointed directly to the BCM. Instead of a costly new module and hours of programming at the dealer, we used a cloning service just like this one. After we received the programmed replacement, the physical swap took less than 30 minutes. The result? Every single phantom electrical issue was gone. The car behaved perfectly, and the owner drove away with a reliable vehicle and significant savings.
How Our Simple Mail-In Cloning Service Works
We make this repair process as straightforward as possible. Your purchase includes one replacement BCM and our expert programming service. Here’s the process:
- Place Your Order: Complete your purchase, ensuring your contact information is accurate.
- We’ll Contact You: Our team will reach out with clear, simple instructions for shipping your original BCM to our facility.
- We Clone Your Data: Once we receive your module, our technicians will perform a full data transfer to the replacement unit. This copies all vehicle-specific information, including key data and security settings.
- We Ship It Back: We ship your new, plug-and-play BCM back to you, typically within 24-48 hours of receiving your original. You’ll receive a tracking number so you can follow its journey home.
Is Your Vehicle Showing These Common BCM Failure Symptoms?
- ✔ Power windows, door locks, or mirrors operate erratically or not at all.
- ✔ Interior or exterior lights flicker, stay on, or won’t turn on.
- ✔ The security system or keyless entry malfunctions, causing no-start conditions.
- ✔ The instrument cluster is dead, or warning lights (like the airbag light) are illuminated for no reason.
- ✔ Diagnostic scans show communication codes like U0140, U0155, or other B-series codes.
- ✔ Unpredictable battery drain when the vehicle is off.
A Straightforward Guide to Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- ✔ Locate the BCM: On the 2011 Camaro, the BCM is typically located behind the dashboard on the right-hand (passenger) side. For other models, its location varies (e.g., driver-side kick panel). Refer to a service manual for your specific vehicle.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the New Module: Mount the replacement BCM in the same location and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock into place.
- ✔ Reconnect the Battery: Reattach the negative battery terminal.
- ✔ Test All Functions: Start the vehicle and test all related functions: windows, locks, lights, horn, and wipers to confirm the repair.
Important Post-Installation Information
Because we transfer your vehicle’s original data, most installations are seamless. However, in some cases, additional steps may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure is needed. This requires a professional-grade scan tool to sync the modules and clear the light.
- Brake Pedal Position Relearn: Some models may require this recalibration to ensure the brake lights and traction control system function correctly.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any part of the process.
Guaranteed Fitment for Your GM Vehicle
This BCM is a direct replacement for part numbers 13582396, 13583450, 13579004, 13580198, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It is compatible with a wide range of models, including:
- Buick LaCrosse (2011-2012)
- Buick Regal (2011)
- Cadillac SRX (2011-2012)
- Chevrolet Camaro (2011)
- Chevrolet Cruze (2012)
- Chevrolet Equinox (2011)
- Chevrolet Orlando (2012)
- Chevrolet Volt (2011, 2013)
- GMC Terrain (2011)
Please match your part number or contact us to verify fitment for your specific vehicle and options.
Frequently Asked Questions
What exactly is a BCM cloning service?
Cloning is a process where we extract the unique, vehicle-specific data from your original BCM—including security information, VIN, and option configurations—and flash it onto the replacement module. This makes the new part a perfect digital twin of the old one, eliminating the need for dealership programming.
Do I need to send my keys with the module?
No, you do not need to send us your keys. All the necessary key and security data is stored within the BCM itself, which we will transfer during the cloning process.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is not functioning in the vehicle, we can still extract the necessary data on our bench-top equipment. Please contact us with the details of your module’s failure before ordering if you suspect it’s completely dead.
How long does the entire process take?
We typically clone and ship the replacement module within 24-48 business hours of receiving your original BCM. The total turnaround time will depend on shipping times to and from our facility.
Why is this better than buying a new BCM from the dealer?
Our service saves you significant money and hassle. You avoid the high cost of a new module from the dealer, expensive dealership labor rates for programming, and the need to have your vehicle towed there for the service. Our solution is plug-and-play.
Is there a core charge?
No, there is no core charge. We provide the replacement module as part of the service. You can keep your original module.