Tired of Chasing Electrical Gremlins in Your Camaro?
Is your 2011 Camaro acting possessed? One minute the power windows work, the next they don’t. Maybe the interior lights are flickering, the security system is preventing it from starting, or you’re seeing a dashboard lit up like a Christmas tree with random warnings. As a technician with over 20 years of experience, I’ve seen these exact issues hundreds of times. The culprit is almost always a failing Body Control Module (BCM)—the central command center for your car’s electronics.
When the BCM goes bad, it creates a cascade of frustrating, seemingly unrelated problems. It controls everything from your key fob and power locks to your headlights and instrument cluster. A faulty module can leave you stranded and facing a massive bill from the dealership for diagnostics, a new part, and mandatory programming. Our service is designed to get you back on the road quickly and affordably, bypassing the dealership hassle entirely.
A Technician’s Notebook: The Case of the Intermittent No-Start
A customer brought in a 2011 Camaro Convertible that would randomly refuse to start. The battery was new, the starter was fine, but sometimes, turning the key did absolutely nothing. After checking the basics, I hooked up my pro-level scanner and found a slew of U-codes (communication errors) pointing to the BCM. The module wasn’t consistently communicating with the Powertrain Control Module (PCM) or the keyless entry system. Instead of a costly new BCM and hours of programming, we used a cloned module. By transferring the data from his original, failing BCM to our replacement unit, the car started every single time, and all the strange electrical quirks vanished. This is the exact, reliable fix we offer you.
Is Your Camaro Showing These BCM Failure Signs?
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic interior or exterior lighting (flickering, staying on, or not working at all).
- ✔ The security or anti-theft system light is on, preventing the engine from starting.
- ✔ Key fob not responding or working inconsistently.
- ✔ False warnings on the instrument cluster (e.g., “Service Airbag,” “Service StabiliTrak”).
- ✔ Communication error codes stored, such as U0140, U0155, or other U-series codes.
- ✔ Wipers activating on their own or not working when commanded.
Your Simple Path to a Reliable Repair
Our service makes replacing your faulty 2011 Camaro BCM a straightforward process. We transfer the critical data from your original module to this replacement unit, making it a true plug-and-play solution. No additional programming or trips to the dealer are required.
- Place Your Order: Purchase this BCM programming service.
- We’ll Reach Out: We will contact you using the information on your order to provide shipping instructions for your original module.
- Ship Your Original BCM: Securely package and send us your vehicle’s original Body Control Module.
- The Magic Happens Here: Upon receipt, our expert technicians will clone all necessary data (including VIN, key information, and vehicle options) to the replacement module.
- Receive & Install: We ship the ready-to-install BCM back to you with tracking. Simply disconnect your old module and plug this one in.
Important Information for After Installation
While our goal is a seamless installation, GM vehicles have complex, interconnected systems. In some cases, minor follow-up procedures may be needed:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Fitment Across Multiple GM Models
This Body Control Module and programming service is compatible with a wide range of vehicles that use part numbers like 13577924, 13583450, 13579004, 13580198, and others listed below. Please match your part number or vehicle to ensure compatibility.
- 2011 Chevrolet Camaro: Body Control (BCM); (RH dash), Convertible
- 2011-2012 Buick LaCrosse: Body Control (BCM); (LH kick panel)
- 2011-2013 Chevrolet Volt: Body Control (BCM); (RH engine compartment)
- 2011-2012 Cadillac SRX: Body Control (BCM); (LH dash)
- 2011 Chevrolet Equinox: Body Control (BCM); (LH side dash), body control
- 2011 GMC Terrain: Body Control (BCM); (LH side dash), body control
- 2012 Chevrolet Cruze: Body Control (BCM); (LH kick panel)
- 2012 Chevrolet Orlando: Body Control (BCM); (below center console)
- 2011 Buick Regal: Body Control (BCM); (LH dash), w/opt AUA (mid-year change)
Frequently Asked Questions
What exactly is a BCM cloning service?
We extract the unique software and security data—like the VIN and key information—from your original, failing BCM and transfer it directly onto this fully functional replacement module. This makes the new part an exact electronic match for your vehicle.
Is this really plug-and-play? Will I need to program it?
Yes, this is a 100% plug-and-play solution. Because we clone your original data, the vehicle recognizes the module as its own. No expensive dealership programming is required.
Why do I need to ship my original module to you?
Your original module contains the essential data that is specific to your car’s features and security system. We need it to perform the cloning process, ensuring the replacement BCM works perfectly with your existing keys and options.
Do I have to pay a core charge or send my old part back after installation?
No. There is no core charge for this service. After we clone the data from your original module, we ship it back to you along with the newly programmed replacement. You can keep your original part.
How long does the programming service take?
We typically program and ship the replacement module within 1-2 business days of receiving your original BCM. We will provide you with return tracking information as soon as it ships.
What if the airbag light comes on after I install it?
This can occasionally happen. It simply means the new BCM needs to be electronically ‘introduced’ to the airbag module. A repair shop with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.