Is Your GM Vehicle Plagued by Electrical Gremlins?
If you’re dealing with bizarre and frustrating electrical issues in your GMC Yukon, Chevrolet Tahoe, Cadillac Escalade, or other compatible GM vehicle, a failing Body Control Module (BCM) is often the culprit. The BCM is the central command center for your vehicle’s body electronics, managing everything from your power windows and locks to your interior lighting and security system. When it starts to fail, it can create a cascade of confusing problems that are difficult to diagnose.
From the Diagnostic Bay
We had a 2010 Yukon in the shop last month with a classic case of BCM failure. The customer reported the dome lights wouldn’t turn off, the radio would randomly shut down, and the security light was always on, causing a constant battery drain. After confirming power and grounds were good, we pinpointed the BCM. Instead of a costly trip to the dealer for a new module and programming, we installed one of our VIN-programmed units. The vehicle was back to normal in under an hour, saving the customer hundreds of dollars and a major headache.
Symptoms of a Failing Body Control Module
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic instrument cluster behavior, with gauges dropping out or warning lights flashing.
- ✔ Interior or exterior lights staying on or not working at all.
- ✔ The security system acting up, preventing the vehicle from starting.
- ✔ Unexplained battery drain that leaves you with a dead battery.
- ✔ Horn honking unexpectedly or not working when pressed.
The Simple, Reliable Solution: A VIN-Programmed BCM
Forget expensive dealership visits and the hassle of coordinating programming. This is a direct-fit replacement 2010 Yukon Body Control Module that arrives at your door ready for installation. We take the complexity out of the repair by pre-programming the module to your vehicle’s specific VIN, loading it with the latest GM software updates. This ensures seamless integration and restores full functionality to your vehicle’s electronic systems.
Installation and Post-Install Notes
Installation is straightforward for a DIYer with basic tools. Once the new module is installed, most vehicles will start and run without any further steps. However, depending on your vehicle’s specific configuration, a couple of simple relearn procedures may be necessary:
- Airbag System Sync: If your airbag warning light illuminates after installation, a technician will need to perform a ‘Setup SDM Primary Key in BCM’ procedure with a professional scan tool. This is a quick process to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure your brake lights and traction control system function correctly.
Best of all, there is no core charge. You can keep your old part without the hassle of shipping it back.
This module is a direct replacement for a wide range of part numbers, including: 10382479, 15093910, 15276271, 15819552, 15921353, 20815898, 22860591, 25892622, and many more. Please verify your part number to ensure compatibility with your vehicle.
Frequently Asked Questions
What does the Body Control Module (BCM) do?
The BCM is a computer that acts as the central hub for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, lights, wipers, the security system, and the instrument cluster.
Do I need to take this part to a dealer for programming?
No! This is the biggest benefit of our service. We program the module to your vehicle’s VIN before we ship it. This makes the installation process much simpler and saves you from expensive dealership programming fees.
How do I give you my VIN?
After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship your order until we receive this information.
Is this a difficult part to replace?
For most GM trucks and SUVs, the BCM is located under the driver’s side of the dashboard and is accessible with basic hand tools. It’s generally considered a beginner-to-intermediate level repair. Always disconnect the battery before starting.
What if the airbag light is on after I install the new BCM?
This can happen on some vehicles. It simply means the new BCM needs to be electronically introduced to the airbag module (SDM). A repair shop with a professional-grade scan tool can perform the ‘Setup SDM Primary Key’ procedure to resolve this.
Will this 2010 Yukon Body Control Module fit other vehicles?
Yes, this BCM fits a very wide range of GM vehicles from approximately 2006 to 2013, including the Tahoe, Suburban, Silverado, Sierra, Impala, Express/Savana vans, and more. Please check the extensive part number list on this page to confirm it matches your original module.