Is Your 2010 Yukon Acting Possessed? Restore Order with a VIN-Programmed BCM.
If your GMC Yukon’s lights are flickering, the power windows have a mind of their own, or you’re getting strange security system alerts, you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central command center for your truck’s comfort and convenience features. When it fails, it can cause a cascade of frustrating and unpredictable electrical issues. Don’t let a faulty module sideline your vehicle. This is the direct, reliable solution you need.
From the Shop Floor: A Real-World Diagnosis
Just last month, a 2010 Yukon was towed to my shop with a no-start condition. The owner had already replaced the battery and checked the starter. The dash lights were going haywire, and the key fob was unresponsive. After hooking up my scanner, I saw multiple communication loss codes pointing to the BCM. A quick inspection under the dash revealed the classic sign: corrosion on the BCM connectors from a slow windshield leak. We swapped in a pre-programmed module like this one, and the truck fired right up, with all electronics functioning perfectly. It’s a common failure point, but thankfully, it’s a straightforward fix with the right part.
The Hassle-Free Solution: Programmed & Ready to Install
Forget about towing your Yukon to the dealership and paying hundreds for programming and labor. We take the complexity out of the repair. Simply provide us with your vehicle’s VIN during checkout, and our technicians will flash this BCM with the latest GM software specific to your Yukon’s options. It arrives at your door ready for a plug-and-play installation.
Common Symptoms of a Failing BCM:
- โ Erratic or non-functional interior/exterior lights
- โ Power windows, door locks, or mirrors not working
- โ Intermittent no-start or security system issues
- โ Horn honking randomly or not at all
- โ Instrument cluster gauges behaving abnormally
- โ Communication error codes (U-codes) stored in the system
Easy Installation for the DIYer
Replacing the 2010 Yukon Body Control Module is a job most owners can handle with basic tools. The BCM is typically located under the driver’s side of the dashboard, near the steering column.
- Safety First: Disconnect the negative terminal from your vehicle’s battery.
- Locate the BCM: Find the module under the driver-side dash. It will have several large multi-pin electrical connectors.
- Disconnect and Remove: Carefully unclip all electrical connectors. Use a small screwdriver to gently release the locking tabs if needed. Then, unbolt the module from its mounting bracket.
- Install the New BCM: Mount the new module in place and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock in.
- Reconnect Battery: Re-attach the negative battery terminal.
- Perform Relearn Procedures: Follow the post-installation steps below to ensure full functionality.
Critical Post-Installation Steps
After installing your new 2010 Yukon Body Control Module, a few final steps are required to sync the new module with your vehicle’s other systems. This is essential for safety and proper operation.
- Airbag System Reset: You must perform the ‘Setup SDM Primary Key in BCM’ procedure using a bi-directional scan tool. This step ensures the new BCM communicates correctly with the airbag system and extinguishes the warning light.
- Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated after BCM replacement. This ensures the brake lights and stability control system function as intended.
Note: If you are not equipped with a professional diagnostic tool or are unsure about these procedures, we strongly recommend seeking assistance from a qualified technician.
Guaranteed Fitment & Compatibility
This BCM is a direct replacement for a wide range of GM vehicles and part numbers. If your original module has any of the following numbers, this part is a compatible replacement: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. This part is a confirmed fit for your 2010 Yukon Body Control Module and many other models listed in the fitment guide.