Is Your Tahoe Acting Possessed? You’re Not Alone.
If your 2010 Chevy Tahoe is suddenly plagued by a host of bizarre electrical issues, you’ve come to the right place. Are the power windows working intermittently? Do the door locks have a mind of their own? Are your dash lights flickering like a disco ball, or is the security light staying on, preventing the truck from starting? These aren’t random failures; they’re classic symptoms of a failing Body Control Module (BCM).
“A customer’s 2010 Tahoe came in last week with these exact symptoms. The radio would turn on and off by itself, and the key fob was completely unresponsive. After confirming power and grounds were good at the BCM connector, we knew the internal logic had failed. Swapping in a pre-programmed BCM like this one resolved every single issue in under 30 minutes. It’s the most common point of failure for these ghost-in-the-machine problems.”
The Direct Solution: A VIN-Programmed BCM
Don’t waste time and money chasing individual electrical gremlins or paying for expensive dealership diagnostics. This Body Control Module is the central command for your vehicle’s comfort and convenience features. We provide a reliable, cost-effective solution by pre-programming this module to your Tahoe’s specific Vehicle Identification Number (VIN) before it ships. This ensures it communicates perfectly with your vehicle’s other systems right out of the box.
- ✔ VIN Programmed for Your Tahoe: We flash the module with the latest GM software updates using your VIN. Simply provide it to us after purchase.
- ✔ Fixes Common Electrical Failures: A direct solution for issues with power windows, door locks, interior/exterior lighting, key fob functionality, and security system faults.
- ✔ No Dealer Visit Required: This module arrives ready for installation, bypassing the need for costly programming at a dealership.
- ✔ Restores Full Functionality: Get your truck’s accessories and systems working reliably again.
Easy Installation Guide for your 2010 Tahoe Body Control Module
Replacing the BCM on your Tahoe is a straightforward job you can do in your own driveway. In most GMT900 platform vehicles like the Tahoe, Yukon, and Suburban, the BCM is located under the driver’s side of the dashboard, near the steering column.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before beginning work.
- Locate the BCM: Remove the lower dash panel beneath the steering wheel to gain access. The BCM is a black plastic box with several large multi-pin connectors.
- Disconnect and Remove: Carefully unplug all electrical connectors. They have locking tabs that need to be depressed. Once unplugged, unclip or unbolt the old module from its mounting bracket.
- Install the New Module: Seat your new, pre-programmed BCM into the mounting bracket and securely plug in all the electrical connectors. You should hear a ‘click’ as they lock into place.
- Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘ON’ position and test all functions – windows, locks, lights, etc. – to confirm the repair.
Important Post-Installation Steps
After installing your new BCM, a couple of quick relearn procedures are necessary to ensure all systems are synchronized. This is a standard part of the process when replacing a major control module.
- Airbag System (SRS): You will need to perform the ‘Setup SDM Primary Key in BCM’ procedure using a bi-directional scan tool. This step is critical for clearing the airbag warning light and ensuring the safety system is fully operational.
- Brake Pedal Position Sensor: Some vehicles require a brake pedal position sensor relearn. This ensures the BCM receives the correct input for systems like cruise control and brake lights.
Note: While the core functions will work immediately, these final steps require a diagnostic tool with relearn capabilities. If you don’t have one, any qualified independent shop can perform these procedures for you quickly.
Guaranteed Fitment & Part Number Compatibility
This module is a direct replacement for part number 25892622 and is also compatible with the following interchangeable part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25910474, 25934762, 25934763, 95151084
This BCM fits a wide range of GM vehicles, including but not limited to:
- Chevrolet: Tahoe, Suburban, Avalanche, Equinox, Express Van, Impala, Monte Carlo, Traverse, Captiva Sport, Caprice
- GMC: Yukon, Yukon XL, Acadia, Savana Van
- Cadillac: Escalade, Escalade ESV, Escalade EXT, DTS, CTS, SRX, STS
- Buick: Enclave, Lucerne
- Pontiac: G8, Torrent
- Saturn: Outlook, Vue
- Hummer: H2
Please verify your vehicle’s original part number or consult the detailed fitment list to ensure compatibility.