Programmed 2010 Tahoe Body Control Module BCM 25847588

Restore Your Tahoe’s Electronics!

Fixes erratic lights, power locks, and security issues caused by a faulty BCM. This Body Control Module comes programmed to your VIN for a simple swap. No dealer visit required for programming. Get back on the road fastโ€”order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1044 Categories: ,
Guaranteed Safe Checkout

Is Your Tahoe Acting Possessed?

If you’re dealing with a 2010 Chevy Tahoe that has a mind of its ownโ€”windows that won’t roll down, door locks acting erratically, a security light that won’t turn off, or interior lights flickering like a haunted houseโ€”you’re not alone. These are classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your truck’s body electronics, and when it starts to go, it can cause a cascade of frustrating, hard-to-diagnose problems.

“A customer’s 2010 Tahoe came in last week with these exact symptoms. The radio would randomly shut off, and the driver’s side power window only worked when it felt like it. After checking all the fuses and wiring, we traced the fault back to the BCM. Once we swapped in a correctly programmed module, every single issue was resolved instantly. It’s a fix that brings immense relief to owners who thought they were facing a massive electrical nightmare.”

The Direct Solution: A VIN-Programmed BCM

Stop chasing electrical gremlins and get the definitive fix. This Body Control Module is the solution for your 2010 Tahoe Body Control Module issues. We take all the guesswork and dealership hassle out of the equation. Simply provide us with your vehicle’s VIN during checkout, and our experts will program the module with the latest GM software specific to your exact vehicle configuration. It arrives at your door ready for installation.

Common Symptoms of a Failing BCM:

  • โœ” Intermittent or non-functional power windows and door locks.
  • โœ” Erratic behavior from interior or exterior lights.
  • โœ” The security system light stays on, or the vehicle won’t start.
  • โœ” Horn sounding unexpectedly or not working at all.
  • โœ” False warnings on the driver information center (DIC).
  • โœ” Communication errors with other vehicle modules (DTCs starting with ‘U’).

Simple Installation Guide for your 2010 Tahoe

Replacing the BCM on your Tahoe is a straightforward job you can do in your own garage. The module is typically located under the driver’s side of the dashboard, near the steering column.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
  2. Locate the BCM: Remove the lower dash panel beneath the steering wheel to gain access to the BCM. It’s a black box with several large electrical connectors.
  3. Disconnect and Remove: Carefully press the release tabs on each wiring harness connector and pull them straight out. Then, unbolt or unclip the old BCM from its mounting bracket.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location. Firmly reconnect all the wiring harnesses, ensuring they click securely into place.
  5. Power Up: Reinstall the dash panel and reconnect the negative battery terminal.

Critical Post-Installation Steps

Because this is a brand new, correctly programmed 2010 Tahoe Body Control Module, your vehicle’s other systems need to recognize it. After installation, two procedures are required using a professional-grade scan tool:

  • Airbag System Handshake: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This allows the BCM and the airbag module (SDM) to communicate securely. If this step is skipped, the airbag warning light will remain illuminated on your dash.
  • Brake System Check: Some vehicles require a ‘Brake Pedal Position Sensor Calibration’ after a BCM replacement to ensure the brake lights and stability control systems function correctly.

Guaranteed Compatibility

This module is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. It is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. It also fits a broad range of GM vehicles including the Yukon, Suburban, Escalade, Avalanche, Express/Savana vans, and more. Please verify your part number or consult the fitment list to confirm compatibility.

Genuine OEM

Yes

Condition

Refurbished

MPN

25847588

Interchange part number

PartNumber

591

Model

TAHOE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top