Restore Full Functionality to Your GM Vehicle
Are you battling frustrating electrical issues in your 2010 Chevy Suburban? Flickering lights, malfunctioning power windows and locks, a security system that acts up, or even a vehicle that refuses to start can all point to a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of confusing and unpredictable problems. This replacement Body Control Module is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ Vehicle security system faults or alarm sounding unexpectedly.
- ✔ Dashboard warning lights illuminating for no reason.
- ✔ Intermittent no-start or stalling conditions.
- ✔ Problems with the radio, climate control, or other accessories.
Why Choose Our 2010 Suburban Body Control Module?
Getting your vehicle fixed shouldn’t be complicated. We eliminate the most difficult part of replacing a BCM: the programming. Simply provide us with your vehicle’s VIN during checkout, and our technicians will flash this module with the latest, most stable software direct from GM. This ensures that the BCM is perfectly matched to your vehicle’s specific options and configuration. It arrives at your door ready for installation, saving you from expensive dealership programming fees and towing costs. This is a direct-fit replacement for part number 15837419 and many others, guaranteeing a seamless installation process.
Post-Installation Relearn Procedures
While our BCM comes fully programmed, some vehicle systems may require a ‘handshake’ with the new module after installation. This is a normal part of the process. You may need a professional scan tool to perform the following:
- Airbag System Sync: If your airbag light is on after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: To ensure your brake lights and traction control function correctly, a brake pedal position sensor relearn may be required.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Guaranteed Compatibility
This module is a direct replacement for a wide range of original equipment part numbers, ensuring broad compatibility across many GM models. Please verify your part number against this list:
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. We handle all the programming for you before we ship the part. Just provide your vehicle’s 17-digit VIN at checkout, and it will arrive ready to install.
Is this a simple plug-and-play installation?
For the most part, yes. You disconnect the old BCM and connect this one. However, as noted, some vehicles may require additional relearn procedures for the airbag or brake systems, which require a professional scan tool.
What happens if my airbag light turns on after I install it?
This is a common security measure. A technician will need to perform the ‘Setup SDM Primary Key in BCM’ procedure with a capable scan tool to sync the airbag module to the new BCM and turn off the light.
Do I need to return my old BCM?
No, there is no core charge for this part. You can keep your original module.
How do I know if the BCM is really the problem?
While the symptoms listed are very common for a failing BCM, we always recommend a proper diagnosis by a qualified mechanic. Checking for specific BCM-related trouble codes is the best way to confirm the issue before ordering.
Where is the BCM located on my 2010 Suburban?
On the 2010 Suburban, the Body Control Module is typically located under the driver’s side of the dashboard, near the steering column.