2010 Sts Body Control Module 25934762 Programmed To Your VIN VIN BCM

Restore Your Cadillac’s Electrical Functions

Fix the frustrating electrical problems in your 2010 STS with our VIN-programmed Body Control Module. This BCM is a direct-fit solution that arrives ready for installation, eliminating the need for a costly trip to the dealer. Get your power accessories working again! Order today for a reliable fix.

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1170 Categories: ,
Guaranteed Safe Checkout

Is Your Cadillac STS Suffering from Bizarre Electrical Issues?

If your 2010 Cadillac STS is acting possessed—with flickering dash lights, unresponsive power windows, a haywire security system, or even a no-start condition—the culprit is often the Body Control Module (BCM). As the central nervous system for your vehicle’s comfort and convenience features, a failing BCM can cause a cascade of frustrating and seemingly unrelated problems. Stop chasing electrical gremlins and get the definitive solution.

The Plug-and-Play Fix: No Dealer Visit Required

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the hassle and high cost out of the equation. Simply provide your vehicle’s VIN at checkout, and our technicians will flash this BCM with the latest GM-certified software specific to your 2010 STS. It arrives at your door ready to be installed, saving you from expensive dealership programming fees and diagnostic headaches.

A Real-World Scenario from My Shop

“A customer brought in a 2010 STS last month with a truly baffling set of symptoms. The radio would turn on and off, the interior lights would pulse, and the key fob worked only intermittently. They’d already replaced the battery to no avail. After a quick diagnostic scan, we found multiple communication errors all pointing to the BCM. A small, unnoticed leak from the windshield seal had allowed moisture to drip onto the module over time, causing internal corrosion. We swapped in a VIN-programmed BCM like this one, and every single issue was resolved in under an hour. It’s a common failure point I’ve seen dozens of times.”

Symptoms of a Failing 2010 STS Body Control Module:

  • ✔ Erratic or non-functional power windows, locks, and mirrors.
  • ✔ Dashboard warning lights illuminating for no reason (ABS, Airbag, Security).
  • ✔ Interior or exterior lights staying on or not turning on at all.
  • ✔ The engine cranks but refuses to start due to security system confusion.
  • ✔ Key fob not being recognized by the vehicle.
  • ✔ Climate control system operating incorrectly.

Easy Installation Guide for the DIY Enthusiast

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Locate the BCM: In the 2010 Cadillac STS, the Body Control Module is typically located in the center dash area. You may need to remove a lower dash panel for access.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location. Securely reconnect all electrical connectors. They are keyed and should only fit one way.
  5. Reconnect Battery: Reattach the negative battery terminal.
  6. Perform Final Steps: Proceed with the necessary post-installation procedures outlined below to ensure full functionality.

Important: Post-Installation Procedures Required

Replacing the BCM is not the final step. To ensure safety systems and other components work correctly, the following actions are necessary. These procedures typically require a professional-grade scan tool.

  • Airbag System Reset: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This re-establishes communication between the new BCM and the airbag system (SDM), which will clear the airbag warning light on your dash.
  • Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated after a BCM replacement. This ensures the brake lights and stability control system function correctly.

Guaranteed Fitment & Part Number Compatibility

This module is a direct replacement for a wide range of GM vehicles and supersedes multiple part numbers. If your original module has any of the following numbers, this unit is the correct replacement for you:

Compatible Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

This part is also confirmed to fit a wide array of models including the Cadillac DTS, CTS, SRX, Escalade; Chevy Equinox, Impala, Tahoe, Traverse, Express; GMC Acadia, Yukon, Savana; and more. Please verify your specific model and year in the fitment chart.

Frequently Asked Questions (FAQ)

Q: How do I know for sure that my BCM is the problem?
A: While the symptoms listed above are strong indicators, a definitive diagnosis comes from a professional scan tool showing communication fault codes with the BCM (U-codes). A mechanic can confirm this for you.

Q: What information do you need to program the BCM?
A: All we need is your vehicle’s 17-digit Vehicle Identification Number (VIN). You can provide this during checkout or send it to us in a message after your purchase.

Q: Is this BCM truly ready to install out of the box?
A: Yes, the core programming is done. However, as with any BCM replacement on these vehicles, security relearn and system synchronization procedures (like for the airbag and brake sensor) are required on-vehicle after installation.

Q: Can I perform the post-installation procedures myself?
A: These procedures require a bi-directional diagnostic scan tool that can perform specific commands. While some advanced DIYers may own such a tool, most customers will need assistance from a qualified mechanic to complete these final steps.
Genuine OEM

Yes

Condition

Refurbished

MPN

25934762

Interchange part number

PartNumber

591

Model

STS

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top