Restore Full Functionality to Your Cadillac with a Pre-Programmed BCM
Are you battling bizarre electrical issues in your Cadillac, GMC, Chevy, or Buick? Flickering lights, malfunctioning power windows, a security system that acts up, or a dashboard lit with warning messages can all point to one central culprit: a failing Body Control Module (BCM). As the nerve center for your vehicle’s comfort and convenience features, a faulty BCM can make driving a frustrating experience. This listing offers a straightforward, reliable solution: a replacement BCM, programmed specifically for your vehicle using the data from your original module.
Our professional cloning service eliminates the need for expensive dealership visits and complex programming procedures. Simply send us your original BCM, and we’ll transfer all the critical vehicle-specific data to this replacement unit. When you receive it back, it’s a true plug-and-play installation. This process ensures that your vehicle accepts the new module seamlessly, retaining all its original settings and features. This is the ideal fix for both seasoned mechanics and determined DIYers looking to save time and money on a 2010 SRX BCM repair.
Common Signs of a Failing Body Control Module
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ The security system or keyless entry failing to work correctly.
- ✔ False warning lights on the instrument cluster, such as ‘Service Stabilitrak’ or airbag indicators.
- ✔ Communication-related Diagnostic Trouble Codes (DTCs), like U0140, U0155, or other ‘U’ codes.
- ✔ In severe cases, a no-start condition where the ignition seems dead.
From the Diagnostic Bay: The SRX with a Mind of Its Own
A customer brought in a 2010 Cadillac SRX that was causing him endless headaches. The dash lights would flicker randomly, the radio would shut off, and occasionally, the car wouldn’t start. He’d already replaced the battery and alternator with no success. After hooking up my scan tool, I saw a flood of communication errors all pointing back to a single source. The BCM was failing internally, creating a network storm that disrupted other modules. Instead of a multi-thousand dollar bill from the dealer for a new module and programming, we used this exact cloning service. The customer sent his old module in, we got the programmed replacement back, and I had it installed in under an hour. The electrical gremlins were gone for good—a perfect, cost-effective repair.
Our Simple and Secure Programming Process
Getting your vehicle back on the road is easy. After you purchase this service, we will contact you with detailed instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate during checkout. Once we receive your module, our technicians will expertly transfer the programming to the replacement unit. We then ship the ready-to-install BCM back to you, typically within 24-48 hours, and provide you with tracking information. It’s a hassle-free process designed to get you a working part fast.
A Straightforward Guide to Your BCM Installation
- ✔ Step 1: Disconnect the Battery. Before starting any electrical work, always disconnect the negative terminal from your vehicle’s battery to prevent shorts.
- ✔ Step 2: Locate the BCM. On the 2010 Cadillac SRX and similar models, the BCM is typically found on the driver’s side of the dashboard or in the LH kick panel area.
- ✔ Step 3: Remove the Original Module. Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
- ✔ Step 4: Install the New Module. Mount the replacement 2010 SRX BCM and securely reconnect all electrical harnesses. You should hear a ‘click’ as they lock into place.
- ✔ Step 5: Reconnect the Battery. Reattach the negative battery terminal. Your vehicle is now ready to start with its newly programmed module.
Important Post-Installation Information
In most cases, this module is a direct plug-and-play solution. However, on some vehicles, additional steps may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor recalibration may be necessary on certain models.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any procedure.
Will This Fit My Vehicle?
This BCM is a direct replacement for several part numbers and fits a range of GM vehicles. Please verify your part number and match it to our list. This module is compatible with the following:
- Part Numbers: 13577850, 13505326, 13500384, 13574844, 13504004, 13504494, 13578420
- Cadillac SRX: 2010 (Body Control (BCM); (LH dash))
- Buick Regal: 2011 (Body Control (BCM); (LH dash), w/o opt AUA)
- Chevrolet Cruze: 2011, 2013 (Body Control (BCM); (LH kick panel))
- GMC Terrain: 2010, 2011 (Body Control (BCM); (LH side dash))
- Chevrolet Equinox: 2010 (Body Control (BCM); (LH side dash))
Frequently Asked Questions
How does the programming service work?
After your purchase, you will ship your original BCM to us. We will clone the essential data from your module to this replacement unit. We then ship the plug-and-play replacement BCM back to you, ready for installation.
Do I need to send my original BCM?
Yes, sending your original module is required. This is how we ensure the replacement BCM is perfectly matched to your vehicle’s VIN, options, and security information, avoiding any need for dealer programming.
Is this a true plug-and-play solution?
Yes, for over 95% of vehicles. Because we clone your original data, the vehicle will recognize the module as its own. In rare cases, a simple relearn procedure, like for the brake pedal position sensor, may be needed.
What is the turnaround time?
We pride ourselves on a fast turnaround. Once we receive your module, the programming and shipping process is typically completed within one to two business days.
Will this fix my specific problem?
This part resolves issues directly caused by a faulty BCM, such as erratic lights, lock failures, and certain no-start conditions. If you’ve diagnosed the BCM as the problem, this is the solution. A proper diagnosis is always recommended.
Do I need to return my old part for a core charge?
No, there is no core charge for this item. While we need your original module for programming, you are welcome to have it shipped back to you along with the replacement if you wish.