Programmed 2010 Escalade ESV Body Control Module BCM 15921353

Restore Full Electrical Function to Your GM Vehicle

Are you dealing with baffling electrical issues in your 2010 Cadillac Escalade ESV? Flickering lights, unresponsive power windows, a security system that acts on its own, or confusing warning messages on the dash are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can turn your luxury SUV into a source of daily frustration. This replacement 2010 Escalade ESV Body Control Module is the definitive solution, arriving at your door pre-programmed to your vehicle’s specific VIN. This eliminates the need for a costly trip to the dealership for programming, saving you time and money.

Is Your Vehicle Showing These Symptoms?

• ✔ Erratic or non-functional interior and exterior lights.
• ✔ Power windows, door locks, or mirrors working intermittently or not at all.
• ✔ The security or anti-theft system engaging incorrectly, possibly causing a no-start condition.
• ✔ Horn sounding unexpectedly or not working when pressed.
• ✔ False warnings on the instrument cluster (e.g., “Service Theft System”).
• ✔ Communication-related Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or B1001 stored in other modules.

A Straightforward Guide to Installation

1. ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the system capacitors to discharge.
2. ✔ Locate the BCM: On the 2010 Escalade ESV, the BCM is typically located under the driver’s side of the dashboard, near the steering column. You may need to remove a lower dash panel for access.
3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old module. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
4. ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location. Firmly reconnect all electrical connectors, ensuring they click into place.
5. ✔ Power Up: Reconnect the negative battery terminal. Turn the ignition to the ‘ON’ position (without starting the engine) for 10-15 seconds to allow the systems to initialize before starting the vehicle.
6. ✔ Post-Installation Checks: Test all body functions—lights, windows, locks, etc. Note that some vehicles may require additional steps as outlined below.

Important Post-Installation Information

While our VIN programming handles the majority of the setup, some vehicle systems may require a ‘handshake’ with the new BCM. This is normal. If you encounter the following, a relearn procedure with a capable bi-directional scan tool is necessary:

• Airbag Light: If the airbag warning light is illuminated, a procedure called “Setup SDM Primary Key in BCM” is needed to sync the airbag system with the new BCM.
• Brake System: On some models, a “Brake Pedal Position Relearn” may be required to ensure correct operation of the brake lights and traction control system.

Always consult a factory service manual for procedures specific to your vehicle. No core return is required; you can keep your old part.

Verified Vehicle Compatibility

This 2010 Escalade ESV Body Control Module is a direct replacement for part number 15921353 and a wide array of other interchangeable GM part numbers. It is guaranteed to fit the specified model and also fits a broad range of other GM cars, trucks, and SUVs. Please verify your original part number against the list below or confirm fitment with your vehicle’s year, make, and model.

Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Frequently Asked Questions