Restore Full Functionality to Your Cadillac with a VIN-Programmed BCM
Are you battling frustrating and unpredictable electrical problems in your 2010 Cadillac Escalade? Intermittent power window failures, flickering lights, a security system that acts up, or even a vehicle that refuses to start can often be traced back to one central component: a failing Body Control Module (BCM). As the electronic nerve center for your vehicle’s body and accessory functions, a faulty BCM can create a cascade of issues that are difficult to diagnose. This isn’t just an inconvenience; it’s a matter of reliability and safety. Stop chasing electrical gremlins and get a definitive solution.
This is a direct-fit replacement 2010 Escalade Body Control Module, which arrives at your door fully programmed to your vehicle’s specific VIN. We handle the complex part by loading the latest GM-certified software onto the module before it ships. This means no expensive trips to the dealership for programming, saving you hundreds of dollars and significant downtime. You get a component that is ready for installation right out of the box, restoring the precise factory operation your luxury SUV was designed to have.
From the Diagnostic Bay: The Case of the Haunted SUV
I remember a 2010 Yukon XL—which uses the same platform as the Escalade—that came into my shop with a laundry list of bizarre symptoms. The owner said his power locks would cycle randomly while driving, the radio would shut off, and the interior lights would stay on, draining the battery overnight. He’d already replaced the battery and checked all the fuses. After connecting my scan tool, I found a slew of ‘U’ codes, specifically U0140 – Lost Communication With Body Control Module. This is a classic sign. The internal logic of the original BCM was failing, sending corrupt data across the vehicle’s network. Installing a VIN-programmed 2010 Escalade Body Control Module like this one solved every single issue instantly. The key is the pre-programming; it ensures all the other modules on the vehicle recognize and communicate with the new BCM correctly from the moment it’s plugged in.
Common Signs of a Failing BCM
If your vehicle is experiencing any of the following, a faulty BCM is the most likely culprit. Replacing it can be the solution you’ve been looking for.
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior or exterior lights that won’t turn on or off correctly.
- ✔ Security system faults or the alarm sounding for no reason.
- ✔ A ‘Service Theft System’ message on the dash.
- ✔ Communication Diagnostic Trouble Codes (DTCs) like U0140, U0155, or B1001.
- ✔ Unresponsive key fobs or push-to-start system failures.
- ✔ Intermittent no-start conditions where the engine cranks but won’t fire up.
Your Straightforward BCM Installation Guide
For most DIYers and professionals, installing this 2010 Escalade Body Control Module is a manageable job. In the Escalade, the BCM is typically located under the driver’s side of the dashboard, near the steering column.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes to allow all systems to power down completely.
- Access the Module: You will likely need to remove the lower dash panel or knee bolster trim to gain access to the BCM. This is usually held in by a few screws or clips.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New BCM: Mount the new, pre-programmed module in the exact same location. Reconnect all electrical connectors firmly, ensuring each one clicks into place.
- Post-Installation Steps: Reconnect the battery terminal. Start the vehicle and check for proper function of all accessories. In some cases, as noted in our FAQ, an airbag light or brake system relearn may be required using a professional scan tool.
Verified Fitment for Your GM Vehicle
This module is a direct replacement for a wide array of GM vehicles and supersedes multiple part numbers, ensuring broad compatibility. Please verify your vehicle is on this list and that your original part number matches one of the numbers below.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Fits Models Including: Acadia (07-12), Avalanche 1500 (10), Caprice (11-13), Captiva Sport (12), CTS (08-13), DTS (06-11), Enclave (08-12), Equinox (07-09), Escalade/ESV/EXT (10), Express/Savana Vans (08-12), G8 (08-09), Hummer H2 (08-09), Impala (06-13), Lucerne (06-11), Monte Carlo (06-07), Outlook (07-10), SRX (07-09), STS (10), Tahoe (10), Torrent (07-09), Traverse (09-12), Vue (08-10), Yukon/Yukon XL (10), and more. Please check the detailed fitment list to confirm your specific model and options.
Frequently Asked Questions
Frequently Asked Questions
How does the VIN programming process work?
After you complete your purchase, you will need to provide us with your vehicle’s 17-digit VIN. We use this number to access the latest official GM software for your specific vehicle build. We then flash this software onto the module before shipping it, making it ready for installation.