Programmed 2010 Avalanche BCM | Body Control Module 10382479

End Your Truck’s Electrical Gremlins

Tired of random electrical problems in your 2010 Avalanche? This Body Control Module (BCM) is the permanent fix. It arrives pre-programmed to your truck’s VIN with the latest GM software, eliminating the need for a dealership visit. It’s a direct-fit replacement that restores full functionality to your power windows, locks, lights, and security system. Order today and get your Avalanche running reliably again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-31 Categories: ,
Guaranteed Safe Checkout

Restore Your Truck’s Electrical System with a Plug-and-Play Solution

Are you dealing with baffling electrical issues in your 2010 Chevrolet Avalanche? Flickering lights, power windows with a mind of their own, or a security light that prevents your truck from starting? As a technician with over 20 years of experience, I’ve seen these exact symptoms hundreds of times, and they almost always point to a failing Body Control Module (BCM). The BCM is the central hub for your truck’s body electronics, and when it starts to go, it can cause a cascade of frustrating and unpredictable problems.

Forget the hassle and expense of a dealership visit. This is a direct-replacement 2010 Avalanche BCM that comes fully programmed to your vehicle’s specific VIN. We load the latest, most stable software from GM before it even leaves our facility. This means no extra programming fees, no special tools required—just a straightforward installation to get your truck back to 100% functionality.

A Technician’s Notebook: The Case of the Haunted Tahoe

A customer brought in a 2010 Tahoe—a very similar platform to your Avalanche—with a list of complaints that sounded like something out of a ghost story. The dome lights would pulse randomly, the radio would shut off, and occasionally, it just wouldn’t start. They had already replaced the battery and checked the alternator. After hooking up my scan tool, I found a classic code: U0140 – Lost Communication With Body Control Module. Instead of a complex wiring issue, the BCM itself was failing internally, corrupting the data network. A new, properly programmed BCM, just like this one, solved every single issue in under an hour. It’s a common failure, but thankfully, a very straightforward fix with the right part.

Is Your Truck Showing These Symptoms?

A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is the likely solution:

  • ✔ Intermittent or non-functional power windows, door locks, or mirrors.
  • ✔ Erratic instrument cluster behavior, including dead gauges or flickering warning lights.
  • ✔ The security or anti-theft light stays on, causing a no-start condition.
  • ✔ Interior or exterior lights not working correctly (e.g., staying on or not turning on at all).
  • ✔ HVAC (heating and A/C) controls are unresponsive.
  • ✔ Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or other ‘U’ (network) codes are present.
  • ✔ Remote keyless entry fails to work.

Your Straightforward BCM Installation Guide

Installing your new 2010 Avalanche BCM is a manageable job for a confident DIYer. While the exact location can vary slightly, it’s typically found under the driver’s side of the dashboard.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes before beginning.
  2. Locate the BCM: On your Avalanche, it’s typically located under the steering column, to the left of the brake pedal. You may need to remove a lower dash panel for access.
  3. Disconnect Connectors: Carefully unplug the multiple wiring harnesses from the old BCM. Each connector has a locking tab that needs to be depressed or a lever that needs to be swung over to release it. Do not force them.
  4. Remove the Old Module: Unbolt or unclip the old BCM from its mounting bracket and remove it from the vehicle.
  5. Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all wiring harnesses. You should hear a ‘click’ as they lock into place.
  6. Reconnect Battery: Reattach the negative battery terminal.
  7. Test Functions: Start the vehicle and test all body functions—windows, locks, lights, radio, etc.—to ensure everything is working as it should.

Important Post-Installation Notes

Because this module is central to many systems, a couple of simple relearn procedures may be needed after installation. This is normal.

  • Airbag System Sync: If your airbag warning light is on after installation, a shop with a professional scan tool will need to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure your brake lights and stability control system function correctly. This is also done with a capable scan tool.

Disclaimer: Always consult a factory service manual for your specific vehicle for detailed instructions and torque specs.

Guaranteed Fitment for Your GM Vehicle

This BCM is a direct replacement for part number 10382479 and is compatible with a wide array of GM vehicles. Please match your original part number or verify your vehicle is on this list. This module replaces the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
ACADIA 07-12 Body Control (BCM); (LH dash)
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, or 22860591
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE / ESV / EXT 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
EXPRESS 1500/2500/3500 VANS 08-12 Body Control (BCM)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-13 Body Control (BCM); (LH dash)
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SAVANA 1500/2500/3500 VANS 08-12 Body Control (BCM)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON / YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622

Do I need to program or flash this module?

Do I need to program or flash this module?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during or after checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

Is there a core charge for my old BCM?

Do I need to program or flash this module?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during or after checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

How do I find my original part number?

Do I need to program or flash this module?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during or after checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

What if my airbag light is on after I install the new BCM?

Do I need to program or flash this module?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during or after checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

Genuine OEM

Yes

Condition

Refurbished

MPN

10382479

Interchange part number

PartNumber

591

Model

Avalanche

Year

2013

Brand

GM

Manufacturer Part Number

Scroll to Top