Programmed 2009 SRX Engine Control Module ECM 1263605

End Your Engine Headaches Now

Get your 2009 SRX running smoothly again with this VIN-programmed Engine Control Module. It arrives flashed with the latest GM software, eliminating the need for a costly trip to the dealership. This is a direct-fit solution for fixing check engine lights, stalling, and poor performance caused by a faulty ECM. Order today for a simple, reliable fix!

$149.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01536-80 Categories: ,
Guaranteed Safe Checkout

Restore Your Cadillac’s Core Performance and Reliability

Is your 2009 Cadillac SRX acting up? Unexplained stalling, a persistent check engine light, or erratic engine behavior can be incredibly frustrating. As a mechanic with over two decades of experience under the hood, I’ve seen how a failing Engine Control Module (ECM) can turn a reliable vehicle into a source of daily stress. This isn’t just a part; it’s the brain of your engine, and when it falters, everything from fuel economy to shifting performance can suffer. This listing offers a direct, dependable solution: a replacement 2009 SRX Engine Control Module, professionally flashed with the latest GM software specifically for your vehicle.

Case Study: A Tricky Diagnosis

A few months back, a 2009 SRX with the 4.6L V8 was towed into my bay. The owner had already replaced the throttle body and multiple sensors chasing a persistent P0606 (ECM/PCM Processor Fault) code and a nasty, intermittent stalling issue. He was at his wit’s end. After verifying the wiring and grounds were solid, all diagnostic paths led back to the ECM itself. Internal processor failures aren’t something you can fix; they require a replacement. We installed one of these VIN-programmed modules, performed the security relearn, and the vehicle ran perfectly. It’s a classic example of how targeting the root cause with a quality part saves time, money, and headaches.

Is Your SRX Exhibiting These ECM Failure Signs?

A faulty ECM can manifest in numerous ways. If you’re experiencing any of the following, your engine’s computer may be the culprit. Look out for:

  • ✔ Check Engine Light is on with codes like P0601, P0606, or other internal processor faults.
  • ✔ Communication error codes (U-codes) indicating the ECM is not talking to other modules.
  • ✔ The engine cranks but refuses to start for no apparent reason.
  • ✔ Unexplained drops in fuel efficiency.
  • ✔ Rough or unstable idling.
  • ✔ The transmission shifts harshly or at the wrong times.
  • ✔ Apparent loss of spark or injector pulse.

The Power of Pre-Programmed Convenience

The single biggest hurdle in replacing an ECM is the programming. Dealerships charge a significant amount for this service, and it requires specialized equipment. We eliminate that step entirely. When you purchase this 2009 SRX Engine Control Module, you simply provide us with your vehicle’s 17-digit VIN. Our technicians will then flash the module with the correct, most current GM-approved calibration for your specific vehicle. It arrives at your door ready for installation, saving you a trip to the dealer and getting you back on the road faster.

A Straightforward Guide to Installation

Replacing the ECM is a manageable job for a confident DIYer. The module on the 2009 SRX is located in the engine compartment on the driver’s side. Always consult a vehicle-specific repair manual, but here are the general steps:

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait at least 15 minutes for the system capacitors to discharge.
  2. Locate the ECM: Open the hood and find the ECM in the driver’s side of the engine bay. It’s a silver metal box with several large electrical connectors.
  3. Disconnect Connectors: Carefully release the locking levers and unplug all wiring harness connectors from the old module. Inspect them for any corrosion or damage.
  4. Remove the Old Module: Unbolt the old ECM from its mounting bracket and remove it from the vehicle.
  5. Install the New Module: Mount your new, pre-programmed ECM onto the bracket and securely tighten the bolts.
  6. Reconnect Everything: Plug the wiring harness connectors firmly into the new module until the locking levers click into place. Reconnect the negative battery terminal.
  7. Perform Security Relearn: You will need to perform a simple security relearn procedure (often called a ‘key-on/key-off’ cycle) to sync the new ECM with your vehicle’s anti-theft system. This procedure typically takes about 30 minutes and does not require special tools. Instructions are readily available online or in your owner’s manual.

Verified Vehicle Compatibility

This ECM is a direct replacement for a wide range of GM vehicles and is interchangeable with multiple service numbers, including 12636659, 12639300, 12628993, and more. Please confirm your vehicle is on the list below:

  • Cadillac CTS (2009) – 6.2L
  • Cadillac DTS (2009-2011)
  • Cadillac SRX (2009) – 4.6L
  • Cadillac STS (2009) – 4.4L, 4.6L
  • Cadillac STS (2010) – 4.6L
  • Cadillac XLR (2009) – ID 12636659 or 12625453
  • Chevrolet Colorado (2009)
  • Chevrolet Colorado (2010-2012) – 2.9L, 3.7L
  • Chevrolet Corvette (2009) – ZR1
  • Chevrolet Trailblazer (2009) – 6.0L
  • GMC Canyon (2009)
  • GMC Canyon (2010-2012) – 2.9L, 3.7L
  • GMC Envoy (2009) – 5.3L
  • Hummer H3 (2009-2010) – 3.7L
  • Buick Lucerne (2009-2011) – 4.6L
  • Saab 9-7X (2009)

Frequently Asked Questions

How do I provide my VIN for programming?

After you complete your purchase, please send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the module until we have this information to program it correctly for your vehicle.

Do I need to do any additional programming after installation?

No. This module comes fully flashed with the latest GM software for your VIN. The only procedure required is a simple security relearn, which you can do yourself in your driveway without any special tools.

Will this fix my specific problem?

This part is a direct solution for a failed ECM. If your vehicle has been properly diagnosed with a faulty engine computer, this will resolve the related issues. It will not fix problems caused by other failed components like bad sensors or wiring issues.

Is this a brand new part?

This is a high-quality, tested, and verified used OEM part. Each unit is inspected and then programmed with fresh, vehicle-specific software, ensuring reliable performance.

What if my original part number isn’t on the interchangeable list?

The provided list covers the most common service numbers. If your vehicle model and year are listed in the compatibility chart, this module will work for you, as it supersedes many older part numbers.

Genuine OEM

Yes

Year
MPN

1263605

Interchange part number

Condition

Refurbished

PartNumber

590

Model

SRX

Make

Year

2009

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , ,

GTIN

Does not apply

Scroll to Top