Restore Your Traverse’s Electrical System with Confidence
Are flickering dash lights, unresponsive power windows, or random security alerts turning your reliable family SUV into a source of daily frustration? A failing Body Control Module (BCM) is often the culprit behind these baffling electrical gremlins. This isn’t just an annoyance; it’s a matter of convenience and safety. We offer a dependable, straightforward solution: a replacement Body Control Module, professionally programmed to your vehicle’s specific VIN before it ever leaves our facility.
Common BCM Failure Symptoms & Your Direct Solution
When the BCM begins to fail, it can create a cascade of confusing issues. If you’re experiencing any of the following, this module is the solution you need to get your Traverse running correctly again:
- Intermittent or non-working power windows, door locks, and interior lights
- Erratic instrument cluster behavior or warning lights (ABS, Airbag, Security)
- Problems with the radio or climate control systems
- Key fob not responding or vehicle security system faults
- Engine cranks but refuses to start due to anti-theft system communication failure
Instead of paying for expensive dealership diagnostics and programming fees, our pre-programmed 2009-2012 Traverse Body Control Module provides a direct path to a reliable repair, saving you time and money.
From the Technician’s Bench: A Note on Diagnostics
“Over my 20 years in the shop, I’ve seen countless owners replace batteries, alternators, and starters trying to solve a BCM issue. A failing BCM is the ‘ghost in the machine,’ causing symptoms that seem unrelated. It can make a perfectly good battery seem dead or disable the starter for no reason. By replacing the BCM with a correctly programmed unit, you’re not just swapping a part; you’re restoring the vehicle’s central nervous system and eliminating the guesswork that leads to costly, unnecessary repairs.”
Features & Benefits
- ✔ VIN-Specific Programming: We flash this module with the latest GM software using your vehicle’s VIN, ensuring it works seamlessly with your Traverse’s existing systems right out of the box.
- ✔ Hassle-Free Installation: Because the programming is done beforehand, you can avoid a trip to the dealership and the associated programming costs.
- ✔ No Core Charge: Keep your old BCM. There are no core charges or return hassles, simplifying the entire process for you.
- ✔ Broad Compatibility: This module is a direct replacement for a wide range of original part numbers, guaranteeing a perfect match for your vehicle.
- ✔ Guaranteed Performance: This unit is backed by our one-year replacement warranty.
Guaranteed Fitment for Multiple GM Models
This 2009-2012 Traverse Body Control Module is a direct replacement for the following part numbers and fits a wide variety of vehicles. Please provide your VIN upon purchase to ensure perfect programming.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
This part will fit these makes and models with these options: ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10.
Important Post-Installation Steps
While this 2009-2012 Traverse Body Control Module is programmed for your vehicle, some models may require additional relearn procedures after installation. These are standard security and safety handshakes between modules. This may include:
- Airbag System Sync: If the airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible scan tool.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be needed to ensure proper brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Frequently Asked Questions
Why do you need my VIN number?
Your Vehicle Identification Number (VIN) is essential for us to program the BCM with the exact software and settings for your Traverse’s specific options and features. This ensures the module communicates correctly with all other computers in your vehicle, making the installation process as simple as possible.
Is this a difficult part to install?
For someone with moderate mechanical experience, the physical installation is typically straightforward. The BCM is usually located under the driver’s side or center dash. The main benefit of our service is that the complex computer programming is already done, which is the most difficult part of the job.
What does the Body Control Module actually do?
The BCM acts as the central hub for your vehicle’s body electronics. It controls non-engine related functions like power windows, interior and exterior lighting, door locks, the security system, climate controls, and the instrument cluster. When it fails, these systems can behave erratically.
Will I need any special tools for the installation?
Basic hand tools (sockets, screwdrivers) are usually sufficient for removing the dash panels and swapping the module itself. However, as noted, some vehicles may require a professional-grade diagnostic scan tool to perform post-installation relearn procedures like the airbag system sync.
Is there a core charge for my old part?
No, there is absolutely no core charge. You are not required to send your old, faulty BCM back to us, which saves you time and shipping costs.