Programmed 2009-2011 Lucerne Engine Control Module 12630464

End Your Lucerne’s Electrical Woes

Fix stalling, no-start conditions, and check engine lights with this direct-fit Engine Control Module for your 2009-2011 Buick Lucerne. It arrives fully programmed to your vehicle’s VIN with the latest GM software, making installation a breeze with no dealership trip required. Just plug it in and restore your car’s reliability. Provide your VIN at checkout and get back on the road fast!

$149.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01536-59 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your Buick Lucerne with a VIN-Programmed ECM

If you’re dealing with frustrating and unpredictable issues like stalling, a persistent check engine light, or a car that just won’t start, the root cause is often the vehicle’s brain: the Engine Control Module (ECM). For 2009-2011 Lucerne Engine Control Module failures, finding a reliable and straightforward fix is critical. This isn’t just a part; it’s a comprehensive solution designed to get your vehicle running smoothly again without the hassle and expense of a dealership visit.

As a technician with over two decades of experience, I’ve seen countless drivers spend a fortune chasing down electrical gremlins. A faulty ECM can mimic a dozen other problems, from bad sensors to fuel pump issues. This direct-fit replacement ECM, part number 12630464, eliminates the guesswork. The most significant benefit we offer is the professional VIN-programming service. Before we ship the module, we flash it with the latest factory software from GM, tailored specifically to your car’s VIN. This ensures all systems communicate correctly, restoring fuel efficiency, ignition timing, and transmission shifting to factory specifications.

From the Diagnostic Bay: Solving an Elusive Lucerne Stalling Issue

I once had a 2010 Buick Lucerne with the 4.6L V8 in my bay that was a real head-scratcher. The owner complained of random stalling at stoplights, but with no consistent check engine codes. We checked the fuel pressure, throttle body, and crank sensor—all were fine. On a hunch, I monitored the live data stream from the ECM and noticed the processor would momentarily drop communication. It was a classic sign of internal ECM failure, something a basic code reader would miss. Instead of a costly new unit from the dealer requiring on-car programming, we sourced a pre-programmed module like this one. The installation took less than 30 minutes, and the stalling issue was completely resolved. The customer saved hundreds and got their car back the same day.

Common Signs of a Failing Engine Computer

  • ✔ Check Engine Light is illuminated, often with internal processor codes like P0601, P0602, or P0606.
  • ✔ The engine cranks but refuses to start.
  • ✔ Unexplained drops in fuel economy and poor engine performance.
  • ✔ Intermittent stalling or a rough, unstable idle.
  • ✔ Transmission shifting problems or harsh engagement.
  • ✔ Communication errors with diagnostic scan tools.

A Straightforward Guide to Your ECM Installation

Installing your new 2009-2011 Lucerne Engine Control Module is a manageable job for a DIYer with basic tools. On the Lucerne 4.6L, the ECM is conveniently located at the lower part of the air cleaner box.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes for the system to discharge.
  2. Locate the Module: Find the ECM, which is mounted to the bottom of the air filter housing assembly in the engine bay.
  3. Disconnect Connectors: Carefully release the locking tabs and unplug the main electrical harnesses from the old ECM. Inspect the connectors for any corrosion or damage.
  4. Remove the Old ECM: Unbolt the module from its mounting bracket.
  5. Install the New ECM: Mount your new, pre-programmed module in place, ensuring it is secure.
  6. Reconnect Everything: Plug the electrical harnesses firmly into the new ECM until they click. Reconnect the negative battery terminal.
  7. Security Relearn (If Necessary): In some cases, a simple security relearn procedure may be required. This typically involves turning the key to the ‘ON’ position for 10-15 minutes. We include instructions if this step is needed for your vehicle.

Verified Vehicle Compatibility List

This module is a direct replacement for part number 12630464 and is interchangeable with service numbers 12636659, 12639300, 1263605, 12628993, 12628911, 12625453, 12622175, and 12678512. It fits a wide range of GM vehicles, including:

  • ✔ Buick Lucerne 2009-2011: Electronic Control Module; (lower part of air cleaner box), 4.6L
  • ✔ Cadillac CTS 2009: Electronic Control Module; (RH front engine compartment), 6.2L
  • ✔ Cadillac DTS 2009-2011: Electronic Control Module
  • ✔ Cadillac SRX 2009: Electronic Control Module; (LH engine compartment), (4.6L)
  • ✔ Cadillac STS 2009-2010: Electronic Control Module; (LH frame rail), 4.4L or 4.6L
  • ✔ Cadillac XLR 2009: Electronic Control Module; (RH front engine compartment)
  • ✔ Chevrolet Colorado / GMC Canyon 2009-2012: Electronic Control Module; (RH firewall)
  • ✔ Chevrolet Corvette 2009: Electronic Control Module; (RH engine compartment), ZR1
  • ✔ Chevrolet Trailblazer / GMC Envoy 2009: Electronic Control Module; (LH engine)
  • ✔ Hummer H3 2009-2010: Electronic Control Module; (RH firewall)
  • ✔ Saab 9-7X 2009: Electronic Control Module; (LH engine)

By purchasing this 2009-2011 Lucerne Engine Control Module, you’re not just buying a part—you’re getting a fully prepared, plug-and-play solution that brings your vehicle’s reliability and performance back to where it should be.

Frequently Asked Questions

Do I need to do any programming myself?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during checkout, and the module will arrive ready for installation with the latest GM software.

Is this a guaranteed fit for my 2010 Lucerne 4.6L?

Yes. As long as you provide the correct VIN, we will program this module to be a 100% compatible, direct-fit replacement for your vehicle.

What if my original part number is different?

This module is interchangeable with several part numbers, including 12636659, 12628993, and others listed above. If your module has one of these numbers, this part will work perfectly.

Will this fix my check engine light?

If the check engine light is caused by an internal failure of the ECM (common codes P0601-P0606), then this replacement module will resolve the issue. It’s crucial to ensure other potential problems (sensors, wiring) have been ruled out.

Is any other setup required after installation?

In most cases, no. It’s a plug-and-play installation. Some GM vehicles may require a simple, key-on security relearn procedure, which takes about 10-15 minutes to complete. We provide easy-to-follow instructions if needed.

Genuine OEM

Yes

MPN

12630464

Interchange part number

Condition

Refurbished

PartNumber

590

Model

LUCERNE

Make

Year

2009

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , ,

GTIN

Does not apply

Scroll to Top