Programmed 2009-2011 Lucerne ECM Engine Computer 12628993

Restore Your Lucerne’s Performance!

Fix check engine lights, stalling, and poor performance with our plug-and-play Engine Control Module for your 2009-2011 Buick Lucerne. It arrives programmed to your VIN with the latest GM softwareโ€”no dealer visit required! Get back on the road fast and order today!

$149.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01536-46 Categories: ,
Guaranteed Safe Checkout

Is Your Buick Lucerne Running Rough, Stalling, or Showing a Check Engine Light?

As a technician with over two decades of experience under the hood, I’ve seen countless drivers frustrated by persistent engine problems. Your 2009-2011 Buick Lucerne, with its smooth 4.6L Northstar V8, is a fantastic car, but when its brainโ€”the Engine Control Module (ECM)โ€”starts to fail, it can cause a cascade of confusing issues. You might be experiencing erratic idling, poor fuel economy, a no-start condition, or a check engine light that just won’t go away. Don’t replace another sensor until you’ve considered the source.

A Technician’s Real-World Experience

“Just last month, a 2010 Lucerne was towed into my bay. The owner had already spent a small fortune replacing the mass airflow sensor and a couple of O2 sensors at another shop, but the car still wouldn’t run right. After connecting my diagnostic scanner, I saw communication errors that didn’t point to a specific sensor but rather the controller itself. We swapped in a pre-programmed ECM, and it fired up perfectly on the first try. The original unit’s internal processors had failed from years of heat cyclesโ€”a common fate for these modules. This simple replacement saved the customer from more guesswork and unnecessary expense.”

The Direct Solution: A VIN-Programmed ECM

This isn’t just a part; it’s a complete solution. We are offering a genuine GM Engine Control Module, part number 12628993, that arrives at your doorstep fully programmed to your vehicle’s specific VIN. We load it with the latest, most stable software updates directly from GM, ensuring optimal performance and compatibility right out of the box.

  • โœ” VIN-Programmed for Your Lucerne: Provide your Vehicle Identification Number at checkout, and we handle the complex programming.
  • โœ” Eliminate Dealer Costs: This module is plug-and-play. No need for an expensive trip to the dealership for flashing or key relearning.
  • โœ” Latest GM Software: We ensure your module has the most current factory calibrations for improved efficiency and performance.
  • โœ” Fix Common Symptoms: A reliable fix for issues like false trouble codes, intermittent stalling, harsh shifting, and poor engine performance.

Plug-and-Play Installation Guide for the 2009-2011 Lucerne ECM

Replacing the ECM on your Lucerne is a straightforward job you can do in your own garage. The module is located in the lower part of the air cleaner box. Follow these steps for a successful installation:

  1. Safety First: Disconnect the negative terminal from your car’s battery and wait at least 15 minutes for the system capacitors to discharge.
  2. Locate the ECM: Open the hood and find the engine air cleaner assembly. The ECM is typically housed within or beneath this box.
  3. Access the Module: You will need to unclip and remove the top of the air cleaner box and the air filter to gain clear access to the ECM.
  4. Disconnect Wiring: Carefully unplug the electrical connectors from the old ECM. There are usually release tabs that need to be pressed or lifted. Inspect the connector pins for any corrosion or damage before proceeding.
  5. Remove Old ECM: Unbolt the old module from its mounting bracket. Keep the hardware as you will need it for the new part.
  6. Install New ECM: Mount your new, pre-programmed ECM using the original hardware. Securely reconnect the wiring harnessesโ€”you should hear a confident ‘click’.
  7. Reassemble & Reconnect: Put the air filter and air cleaner box back together. Reconnect the negative battery terminal.
  8. Final Step: The vehicle may need to perform an idle relearn procedure. Simply start the engine and let it idle for 5-10 minutes to allow the new computer to sync with all the engine’s sensors.

Guaranteed Compatibility

This module is a direct replacement for a wide range of GM vehicles and is interchangeable with the following service part numbers: 12636659, 12639300, 1263605, 12628993, 12628911, 12625453, 12622175, 12630464, and 12678512. By providing your VIN, you guarantee a perfect match for your vehicle’s specific options and systems. Restore the reliability and performance of your Buick Lucerne today.

Genuine OEM

Yes

MPN

12628993

Interchange part number

Condition

Refurbished

PartNumber

590

Model

LUCERNE

Make

Year

2009

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , ,

GTIN

Does not apply

Scroll to Top