Programmed 2008-2012 Express 1500 BCM Body Control Module 15093910

End Your Van’s Electrical Nightmares

Tired of flickering lights, dead windows, and random security alerts? This Body Control Module (BCM) is the permanent fix. It arrives fully programmed to your van’s specific VIN with the latest GM software, eliminating the need for a costly dealership visit. Restore full functionality and dependability to your workhorse van. Order today for a reliable, ready-to-install solution!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-344 Categories: ,
Guaranteed Safe Checkout

Restore Command of Your Van’s Electronics

Is your Chevrolet Express van acting possessed? Flickering lights, malfunctioning power windows, a temperamental security system, or strange warning messages on the dash are classic signs that your Body Control Module (BCM) is failing. As the central hub for your vehicle’s body electronics, a faulty BCM can cause a cascade of frustrating and unpredictable problems. In my 20+ years of diagnostics, I’ve seen BCM failure turn a reliable workhorse into a source of constant headaches. Communication codes like U0140 are often the first clue a technician sees, pointing directly to a breakdown in this critical component.

This isn’t just a replacement part; it’s a complete solution. We take the guesswork and hassle out of the repair by programming this module specifically for your vehicle using your VIN. This ensures all your factory-installed options work correctly right out of the box. We load the latest GM software, which often includes stability improvements over the original programming. You get a reliable fix that restores your van’s functionality without the expensive trip to the dealership for programming.

A Technician’s Notebook: The Haunted Work Van

I had a 2011 Express 1500 come into the shop that the owner swore was haunted. The dome lights would turn on randomly overnight, draining the battery. The radio would switch stations on its own, and the power door locks had a mind of their own. He had already replaced the battery twice. A scan showed no engine codes, but a deep dive into the network showed intermittent communication loss with the BCM. We swapped in a VIN-programmed BCM, and just like that, the ghost was gone. It’s a perfect example of how a single failing module can create dozens of seemingly unrelated, bizarre symptoms.

Is Your Vehicle Showing These Symptoms?

  • ✔️ Power windows, locks, or mirrors work intermittently or not at all.
  • ✔️ Interior or exterior lights flicker, stay on, or won’t turn on.
  • ✔️ The anti-theft or security system engages randomly, preventing the van from starting.
  • ✔️ The instrument cluster displays false warnings or inaccurate readings.
  • ✔️ Communication-related Diagnostic Trouble Codes (DTCs) are present, such as U0140, U0155, or other U-codes.
  • ✔️ Wipers or the horn activate without input.

Your Straightforward BCM Installation Guide

For the 2008-2012 Express 1500 Van, the BCM is typically located in the center dash area. While the exact position can vary slightly, the replacement is manageable for a DIYer with basic tools.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Access the Module: You will likely need to remove a few dash panels to get to the BCM. On Express vans, it’s often behind the lower center instrument panel trim.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that must be depressed. Once disconnected, unbolt the old BCM and remove it from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed module in place and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock.
  5. Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position (without starting the engine) and test all body functions: lights, locks, windows, wipers, etc.

Important Post-Installation Notes

While this module is programmed for your VIN, some vehicle systems may require a ‘handshake’ with the new BCM. This is normal. Specifically, be aware of the following:

  • Airbag System Sync: If the airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be done with a professional scan tool. This is only necessary if the light appears.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure proper brake light and traction control operation.
  • No Core Charge: You are not required to return your old module. This saves you the time and expense of a core return.

Verified Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles and interchanges with multiple part numbers, ensuring a perfect match. Please confirm your vehicle is on this list. This module replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, and many more.

ACADIA 07-12 Body Control (BCM); (LH dash)
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, 22860591
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 08-12 Body Control (BCM)
EXPRESS 3500 VAN 08-12 Body Control (BCM)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-13 Body Control (BCM); (LH dash)
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
SAVANA 2500 VAN 08-12 Body Control (BCM)
SAVANA 3500 VAN 08-12 Body Control (BCM)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622

Do I need to have this BCM programmed by a dealer?

Do I need to have this BCM programmed by a dealer?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s VIN during checkout, and the module will arrive ready to be installed, saving you hundreds in dealership programming fees.

Is this a simple plug-and-play installation?

Yes, for the most part. The module is programmed to your VIN, so it will connect and function immediately. In some rare cases, a simple relearn procedure, like for the airbag system or brake pedal sensor, may be needed, which can be done with a standard professional scan tool.

What does ‘No Core Charge’ mean?

It means you do not have to send your old, faulty BCM back to us. You can keep it, dispose of it, or recycle it locally. This simplifies the process and gets your van back on the road faster.

Will this fix my ‘Service Theft System’ message?

A faulty BCM is a very common cause of false anti-theft system warnings and no-start conditions. Because this module is programmed to your VIN, it correctly syncs with your vehicle’s security components, resolving these issues in most cases.

How do I provide my VIN?

After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot program and ship the module without it. Please double-check the VIN for accuracy to ensure perfect compatibility.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

Interchange part number

PartNumber

Model

Brand

Manufacturer Part Number

Scroll to Top