2008 – 2012 Enclave Body Control Module 25910474 Programmed To Your VIN VIN BCM

Restore Your Enclave’s Electrical System!

Tired of bizarre electrical problems in your 2008-2012 Enclave? This Body Control Module (BCM) is the solution. It arrives pre-programmed to your VIN—no dealer visit needed! It fixes faulty power windows, locks, lights, and security alerts. Get back on the road with confidence. Order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1127 Categories: ,
Guaranteed Safe Checkout

Is Your Buick Enclave Acting Possessed?

Are you dealing with a frustrating storm of electrical gremlins in your 2008-2012 Buick Enclave? One minute the power windows work, the next they don’t. The radio might randomly shut off, the security light flashes for no reason, or worse, you’re facing a dead battery every morning from interior lights that won’t turn off. These aren’t random quirks; they are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, when the BCM goes down, it takes comfort and convenience features with it.

Expert Pro Tip: Check for Water Intrusion First

Before installing your new BCM, take a moment to inspect the area around the driver’s side A-pillar and windshield for any signs of water leaks. In my 20+ years in the shop, a common cause of BCM failure on these Lambda-platform SUVs (Enclave, Acadia, Traverse) is water dripping onto the module from a clogged sunroof drain or a failing windshield seal. A simple check can prevent a repeat failure and save you from another headache down the road.

The Direct-Fit, Programmed Solution

Stop chasing electrical ghosts and get the definitive fix. This Body Control Module is the solution you need, arriving at your door fully programmed to your vehicle’s specific VIN. We handle the complex part for you. Simply provide us with your VIN during checkout, and our technicians will flash the module with the latest GM software updates. This ensures it communicates perfectly with your Enclave’s other systems right out of the box, eliminating the need for an expensive trip to the dealership for programming.

Common Symptoms of a Failing BCM:

  • ✔ Intermittent or non-working power windows, door locks, or mirrors.
  • ✔ Erratic interior or exterior lighting (e.g., dome lights staying on).
  • ✔ Malfunctioning keyless entry or remote start.
  • ✔ False security system alarms or “Service Theft System” messages.
  • ✔ Unresponsive dashboard controls or gauges.
  • ✔ Communication error codes with other modules (U-codes).
  • ✔ Unexplained battery drain leading to a no-start condition.

Simple Installation to Restore Functionality

Replacing the 2008-2012 Enclave Body Control Module is a straightforward job you can do at home. The BCM is typically located behind the lower left-hand side of the dashboard.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery.
  2. Locate the BCM: Remove the lower dash panel on the driver’s side to access the module.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt the old BCM and remove it.
  4. Install the New Module: Mount your new, pre-programmed BCM in place and securely plug in all the electrical connectors.
  5. Reconnect Power: Reconnect the negative battery terminal.

CRITICAL: Post-Installation Procedures

After installing your new 2008-2012 Enclave Body Control Module, a few final steps are required to ensure all vehicle systems operate correctly and safely. These procedures require a professional-grade scan tool.

  • Airbag System Reset: To clear the airbag warning light, the ‘Setup SDM Primary Key in BCM’ procedure must be performed. This re-establishes the security handshake between the new BCM and the airbag system’s Sensing and Diagnostic Module (SDM).
  • Brake Pedal Position Sensor Relearn: Some vehicles will require a recalibration of the brake pedal position sensor. This is vital for the proper operation of the traction control, stability control, and cruise control systems.

Note: While this BCM is plug-and-play regarding vehicle operation, these specific safety system relearns are non-negotiable for a complete and safe repair. If you are not equipped to perform these steps, we strongly advise seeking assistance from a qualified technician.

Guaranteed Compatibility

This module is a direct replacement for a wide range of GM part numbers, ensuring a perfect fit and function. It is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084 and fits a wide array of GM vehicles including the Acadia, Traverse, Equinox, Impala, Tahoe, Yukon, Express/Savana vans, and more. Please verify your part number or consult the fitment chart.

Genuine OEM

Yes

Condition

Refurbished

MPN

25910474

Interchange part number

PartNumber

591

Model

ENCLAVE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top