Programmed 2008-2010 Vue Body Control Module 25826125

Restore Your Vue’s Electrical System

Tired of flickering lights, failing power windows, and other electrical gremlins in your 2008-2010 Saturn Vue? This Body Control Module is your solution. It comes pre-programmed to your vehicle’s VIN for a hassle-free installation, saving you a trip to the dealer. Fix your issue today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1015 Categories: ,
Guaranteed Safe Checkout

Restore Your Saturn Vue’s Electrical Functions and End the Frustration

Are you dealing with bizarre electrical gremlins in your Saturn Vue? One minute the power windows work, the next they don’t. Maybe the security light is flashing, the interior lights are acting up, or you’re facing an intermittent no-start condition that leaves you stranded. These confusing and unpredictable issues often point to a single culprit: a failing Body Control Module (BCM). As an experienced technician, I’ve seen how a faulty BCM can turn a reliable vehicle into a source of constant headaches. It’s the central command center for your vehicle’s comfort and convenience features, and when it fails, chaos ensues.

This isn’t just a replacement part; it’s a complete, hassle-free solution. We eliminate the biggest obstacle in BCM replacement by programming the module to your vehicle’s specific VIN before it ships. This means you can avoid the expensive trip to the dealership and the additional programming fees. You get a part that’s ready for installation right out of the box, loaded with the latest GM software updates to ensure peak performance and reliability for your 2008-2010 Vue Body Control Module.

Case Study: A Tricky Diagnosis

A customer brought in their 2009 Saturn Vue with a laundry list of complaints: the radio would randomly shut off, the key fob worked intermittently, and the anti-theft system would sometimes prevent the car from starting. They had already replaced the battery and checked the fuses with no luck. A scan showed several U-codes (U0140, U0155), indicating a loss of communication between modules. In my shop, this pattern is a classic sign of a BCM failure. The internal circuits degrade over time, causing sporadic communication drops. We installed a VIN-programmed BCM, and all the ghost-like electrical issues vanished instantly. It’s a common fix that restores the vehicle’s functionality and the owner’s peace of mind.

Is Your Vue Showing These Symptoms?

  • ✔ Erratic or non-functional power windows, door locks, or mirrors.
  • ✔ Interior or exterior lights flickering, staying on, or not working at all.
  • ✔ Malfunctioning security system, including a flashing security light or a no-start condition.
  • ✔ Key fob not responding or working inconsistently.
  • ✔ Unpredictable behavior from the horn, wipers, or radio.
  • ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0100, or B1001.

A Straightforward Guide to Installation

Replacing the 2008-2010 Vue Body Control Module is a manageable task for a confident DIYer. The BCM is typically located in the center dash area. Follow these general steps for a successful installation:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait about 10-15 minutes to allow all modules to power down completely.
  2. Locate the BCM: On the 2008-2010 Saturn Vue, the BCM is found behind the center part of the dashboard. You may need to remove some trim panels to gain access.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module and remove it from the vehicle.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location as the old one. Securely plug in all electrical connectors, ensuring they click into place.
  5. Reconnect the Battery: Re-attach the negative battery terminal and tighten it securely.
  6. Critical Post-Installation Procedures: After installation, a few final steps are required. You will need a capable diagnostic scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear any airbag faults. Additionally, some vehicles may require a Brake Pedal Position Sensor recalibration to ensure proper brake light and stability control function. If you are not comfortable with these steps, a professional technician can complete them for you.

Guaranteed Fitment for Your GM Vehicle

This module is a direct replacement for a wide range of GM vehicles and part numbers, ensuring perfect compatibility when programmed to your VIN. Please verify your vehicle is on the list below. This part replaces the following numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

This is the correct 2008-2010 Vue Body Control Module and also fits:

ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10. (Please check the detailed list in the original description for specific options and IDs).

Frequently Asked Questions

Why is providing my VIN so important?

Your Vehicle Identification Number (VIN) allows us to program the BCM with the exact software and settings for your Vue’s specific options, like the type of transmission, security system, and power accessories. This ensures the module works perfectly right out of the box.

Will this BCM fix my ‘Service Airbag’ light?

A faulty BCM can cause a ‘Service Airbag’ warning. After installing this new BCM, the ‘Setup SDM Primary Key in BCM’ relearn procedure must be performed with a professional scan tool to synchronize the BCM with the airbag system and turn off the light.

Is any other programming required after installation?

No, the main programming is done by us before shipping. However, you will need to perform a few simple relearn procedures, such as the airbag key setup and potentially a brake pedal position sensor calibration. These can be done by a local shop or a DIYer with an advanced scan tool.

How do I find my original part number?

The part number is printed on a sticker on your original BCM. However, you don’t need to match it exactly. As long as your vehicle is listed in our compatibility chart, we will program this module to work correctly based on your VIN.

What tools do I need for the installation?

You’ll typically need basic hand tools like a socket set and screwdrivers to remove the dash trim panels. For the post-installation procedures, a bi-directional diagnostic scan tool is required.

Genuine OEM

Yes

Condition

Refurbished

MPN

25826125

Interchange part number

PartNumber

591

Model

VUE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top