Restore Your Vehicle’s Electrical Systems with a Plug-and-Play Solution
If you’re dealing with bizarre electrical issues in your 2008-2010 Saturn VUE—like power windows with a mind of their own, flickering dash lights, or a security system that won’t cooperate—the Body Control Module (BCM) is the likely culprit. As the central command for your vehicle’s body electronics, a failing BCM can cause a cascade of frustrating and unpredictable problems. This isn’t just an annoyance; it can be a safety concern. This replacement BCM is your reliable, straightforward fix.
We take the guesswork and dealership hassle out of the equation. Unlike a standard replacement part that requires expensive programming, this BCM arrives at your door fully programmed to your vehicle’s exact specifications. Simply provide us with your VIN during checkout, and our technicians will flash the module with the latest GM software for your specific vehicle. This ensures a seamless installation and restores your car’s functions precisely as the factory intended. This is the most efficient way to get your 2008-2010 VUE Body Control Module replaced and your vehicle back to perfect working order.
A Technician’s Notebook: The Case of the Haunted SUV
A customer brought in a 2009 Saturn VUE with a list of complaints that sounded like the vehicle was haunted. The radio would turn on and off, the dome light would flicker, and sometimes the key fob wouldn’t work. They had already replaced the battery and checked the alternator. After hooking up my scan tool, I saw several ‘U’ codes, indicating a loss of communication between modules. In my 20+ years of experience, these ghost-like symptoms almost always point to the BCM. We installed a VIN-programmed module just like this one, and in under an hour, every single issue was resolved. The customer was thrilled to have their reliable vehicle back without a massive dealership bill.
Common Signs of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and interior lights.
- ✔ The security or anti-theft system light stays on or flashes, potentially causing a no-start condition.
- ✔ Instrument cluster gauges behaving erratically or not working at all.
- ✔ Communication error codes, such as U0140, U0155, or other U-series DTCs.
- ✔ Wipers or turn signals activating randomly or not at all.
A Straightforward Guide to Your BCM Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait about 10 minutes to ensure all systems are powered down.
- ✔ Locate the BCM: On the 2008-2010 Saturn VUE, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or a lower dash panel.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the New Module: Mount the new, pre-programmed BCM in the same position as the old one. Securely reconnect all electrical harnesses. Ensure each connector clicks into place.
- ✔ Reconnect and Test: Reconnect the negative battery terminal. Turn the ignition to the ‘ON’ position (without starting the engine) and test all body functions—windows, locks, lights, wipers, etc.
- ✔ Perform Relearns (If Needed): As noted below, you may need to perform an Airbag System Sync or Brake Pedal Position Relearn if you see related warning lights.
Important Post-Installation Information
While this module is programmed for a plug-and-play installation, some vehicles may require additional steps to sync with other onboard systems. Please be aware of the following:
- Airbag System Sync: If the airbag (SRS) warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure proper operation of the brake lights and traction control system.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any part of the installation process.
Verified Vehicle Compatibility
This 2008-2010 VUE Body Control Module is a direct replacement for part number 15299986 and is also compatible with a wide range of other GM vehicles and part numbers. Please verify your original part number against this list for guaranteed fitment.
Interchangeable Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Fits Models Including:
AVALANCHE 1500 10
CAPRICE 11-13
CAPTIVA SPORT 12
CTS 08-13
DTS 06-11
ENCLAVE 08-12
EQUINOX 07-09
ESCALADE 10
ESCALADE ESV 10
ESCALADE EXT 10
EXPRESS 1500 VAN 08-12
EXPRESS 2500 VAN 08-12
EXPRESS 3500 VAN 08-12
G8 08-09
HUMMER H2 08-09
IMPALA 06-13
LUCERNE 06-11
MONTE CARLO 06-07
OUTLOOK 07-10
SAVANA 1500 VAN 08-12
SAVANA 2500 VAN 08-12
SAVANA 3500 VAN 08-12
SRX 07-09
STS 10
SUBURBAN 1500 10
TAHOE 10
TORRENT 07-09
TRAVERSE 09-12
VUE 08-10
YUKON 10
YUKON XL 1500 10
Note: Specific options may apply. Always confirm your part number or consult with us if you are unsure.
Frequently Asked Questions
Do I need to program this BCM?
No! We handle all the programming for you before shipment. Just provide your vehicle’s VIN at checkout, and it will arrive ready to install.
Is there a core charge for my old part?
Absolutely not. There is no core charge on this module. You can keep your original part without any extra fees or hassle.
What happens if I forget to provide my VIN?
To ensure a smooth process, we cannot ship the module until we receive your VIN for programming. We will contact you via email to request the information if it’s not provided with your order.
Where is the BCM located on my 2009 Saturn VUE?
The BCM is typically found inside the vehicle, within the center dash console area. Accessing it may require removing the glove box or a lower dash trim panel.
What if my airbag light comes on after I install it?
This can happen occasionally as the new BCM needs to be security-synced with the airbag module (SDM). This requires a ‘Setup SDM Primary Key’ procedure, which can be done by a repair shop with a professional-grade diagnostic tool.