Programmed 2008-2010 Vue BCM | Body Control Module 25934763 | VIN Matched

Fix Your Vehicle’s Electrical Gremlins

Restore proper function to your power accessories and security system with this pre-programmed Body Control Module for 2008-2010 Saturn Vue and other GM models. Arrives flashed to your VIN—no dealer visit required. Get a reliable fix for frustrating electrical issues. Order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1207 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution

Are you dealing with baffling electrical problems in your Saturn Vue or another GM vehicle? Intermittent power windows, flickering lights, a security system that acts up, or even a vehicle that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and unpredictable issues. I’ve spent over 20 years diagnosing these exact problems, and I know how a bad BCM can make you feel like you’re chasing ghosts in the wiring.

This isn’t just a replacement part; it’s a complete, hassle-free fix. We take the guesswork and expensive dealership trips out of the equation. This genuine GM Body Control Module, compatible with part number 25934763, arrives at your door pre-programmed with the latest GM software updates, specifically matched to your vehicle’s VIN. This means no need for expensive scan tools or programming appointments. It’s the most direct path to getting your vehicle back to 100% functionality and restoring your peace of mind. By installing our pre-flashed 2008-2010 Vue BCM, you’re not just swapping a part—you’re ensuring all related electronic systems communicate correctly from the moment of installation.

Case Study: A Tricky Diagnosis

A customer brought in their 2009 Saturn Vue last month with a list of strange symptoms. The dome light would stay on, the driver’s side power window worked only when it wanted to, and occasionally the car wouldn’t start, despite having a new battery. They were getting communication error codes, specifically a U0140 (Lost Communication With Body Control Module). After confirming power and ground at the BCM connector were solid, it was clear the module itself had failed internally. We installed one of our VIN-programmed BCMs, performed the quick post-install procedures, and the vehicle was back to perfect working order in under an hour. It saved the customer hundreds compared to the dealership quote.

Is Your Vehicle Showing These Symptoms?

  • ✔ Erratic or non-functional interior/exterior lights.
  • ✔ Power windows, door locks, or mirrors working intermittently or not at all.
  • ✔ The anti-theft or security system light is on, preventing the engine from starting.
  • ✔ The key fob is not being recognized by the vehicle.
  • ✔ Dashboard warning lights appearing for no reason.
  • ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or B1001.
  • ✔ Wipers or radio behaving unpredictably.

A Straightforward Guide to BCM Installation

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
  2. Locate the BCM: On the 2008-2010 Saturn Vue, the BCM is typically located in the center dash area. For other models, refer to the fitment list below for its general position (e.g., LH dash, under steering column).
  3. Disconnect and Remove: Carefully unplug the wiring harness connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely plug in all the wiring harnesses. You should hear a click as they lock into place.
  5. Reconnect the Battery: Re-attach the negative battery terminal.
  6. Perform Final Steps: Follow the required post-installation procedures outlined below to ensure full system functionality, particularly for the airbag and brake systems.

Important Post-Installation Requirements

After installing your new 2008-2010 Vue BCM, a couple of final steps are necessary to sync the new module with your vehicle’s safety systems. This is critical for proper operation.

  • Airbag System Reset: To clear the airbag warning light, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-level diagnostic tool. This ensures the BCM and Supplemental Restraint System can communicate.
  • Brake Pedal Position Sensor Calibration: Some vehicles require this calibration to ensure the brake lights and stability control systems function correctly. This also requires a professional-grade scan tool.

Verified Vehicle Compatibility

This BCM is a direct replacement for part number 25934763 and a wide range of other GM part numbers. It fits the following vehicles, but always confirm your original part number is on our list:

ACADIA 07-12 (LH dash) | AVALANCHE 1500 10 (under steering column) | CAPRICE 11-13 | CAPTIVA SPORT 12 (center dash) | CTS 08-13 (LH/RH dash) | DTS 06-11 (RH center dash) | ENCLAVE 08-12 (LH dash) | EQUINOX 07-09 (center dash) | ESCALADE 10 (under steering column) | ESCALADE ESV 10 (under steering column) | ESCALADE EXT 10 (under steering column) | EXPRESS VANS 08-12 (center dash) | G8 08-09 (center dash) | HUMMER H2 08-09 (LH firewall) | IMPALA 06-13 (LH dash) | LUCERNE 06-11 (right side dash) | MONTE CARLO 06-07 (LH steering column) | OUTLOOK 07-10 (center dash) | SAVANA VANS 08-12 (center dash) | SRX 07-09 (LH dash) | STS 10 (center dash) | SUBURBAN 1500 10 (under steering column) | TAHOE 10 (under steering column) | TORRENT 07-09 (center dash) | TRAVERSE 09-12 (LH dash) | VUE 08-10 (center dash) | YUKON 10 (under steering column) | YUKON XL 1500 10 (under steering column)

Frequently Asked Questions

Do I need to get this BCM programmed?

No! The main benefit of our service is that we program the module to your vehicle’s specific VIN before we ship it. It arrives ready for installation.

Why do you need my VIN?

Your Vehicle Identification Number (VIN) allows us to load the exact software and vehicle-specific options from GM’s database, ensuring perfect compatibility and function.

Where is the BCM located on my 2008 Saturn Vue?

The BCM on the 2008-2010 Saturn Vue is located behind the center part of the dashboard, often accessible after removing trim panels around the radio and climate controls.

What tools are needed for the post-installation procedures?

The airbag system reset and brake pedal calibration must be done with a professional-grade bidirectional scan tool. Most basic code readers cannot perform these functions. We recommend visiting a qualified technician for these final steps if you don’t have the tool.

Will this fix my car’s no-start problem?

If the no-start is caused by the anti-theft system being triggered by a faulty BCM, then yes, this will resolve the issue. A faulty BCM is a very common cause of security-related starting problems.

Is this compatible with other part numbers?

Yes, this module replaces a long list of part numbers including 15819552, 20815898, 22860591, 25892622, and many others listed in the product details. Please verify your original part number is on the list.

Genuine OEM

Yes

Condition

Refurbished

MPN

25934763

Interchange part number

PartNumber

591

Model

VUE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top