Restore Your Saturn Vue’s Functionality and Peace of Mind
Are you chasing electrical gremlins in your 2008-2010 Saturn Vue? From flickering dashboard lights and erratic power windows to a security system that prevents your car from starting, a failing Body Control Module (BCM) can be the source of immense frustration. As the central command for your vehicle’s body electronics, a faulty BCM can disrupt dozens of functions you rely on every day. This isn’t just an annoyance; it can impact vehicle security and safety systems.
We offer a direct, reliable solution. This Body Control Module, part number 20921435, arrives at your door pre-programmed to your vehicle’s specific VIN. We handle the complex part—loading the latest GM software—so you can skip the expensive trip to the dealership. This is a straightforward fix designed to get your Vue operating as it should, restoring predictability and control.
Case Study: A Tricky Diagnosis
A customer brought in a 2009 Saturn Vue with a baffling set of symptoms. The power locks would work one minute and not the next, the radio display would randomly go blank, and twice in one week, the vehicle refused to start, displaying the security light. We checked the battery, alternator, and all major ground connections—they were solid. A scan revealed several communication loss codes (U-codes) with various modules. In my 20+ years of experience, this pattern almost always points back to a single source: a failing BCM. Instead of a costly diagnostic rabbit hole, we installed a VIN-programmed BCM. The swap took less than an hour, and every single electrical issue was resolved instantly. The customer avoided hundreds in dealer fees and diagnostic time.
Common Signs of a Failing BCM
If your Saturn Vue is experiencing these issues, a faulty BCM is the likely culprit:
- ✔ Erratic or non-functional power windows, door locks, or interior lights.
- ✔ The security or anti-theft light stays on, causing a no-start condition.
- ✔ Dashboard warning lights flicker or illuminate for no reason.
- ✔ Horn, wipers, or other accessories operate intermittently on their own.
- ✔ Diagnostic trouble codes (DTCs) related to communication loss, such as U0140.
A Straightforward Guide to Installation
This module is designed for a direct replacement. For the handy DIYer, this is a manageable weekend project.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the BCM: In the 2008-2010 Saturn Vue, the Body Control Module is located behind the center dash console. Access may require removing some trim panels.
- Perform the Swap: Carefully release the locking tabs on the electrical connectors and unplug them. Unbolt the old BCM, remove it, and mount the new module in its place.
- Reconnect Everything: Securely plug in all electrical connectors to the new BCM. You should hear a click as they lock in place. Reconnect the negative battery terminal.
Important Post-Installation Information
While our programming handles the majority of the setup, some vehicles may require additional steps to sync with other onboard systems:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light operation and traction control function.
- No Core Charge: You are not required to return your old module. There is no core charge or deposit associated with this purchase.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any part of the process.
Verified Vehicle Compatibility
This module is a guaranteed fit for the 2008-2010 Saturn Vue and is also compatible with a wide range of other GM vehicles. Please verify your original part number against our cross-reference list to ensure a perfect match. This part replaces the following numbers:
This part will fit these makes and models with these options
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
Frequently Asked Questions
Do I need to take this BCM to a dealer for programming?
Do I need to take this BCM to a dealer for programming?
No. We pre-program the module using your vehicle’s VIN before we ship it. It arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.
Why do you need my VIN?
Do I need to take this BCM to a dealer for programming?
No. We pre-program the module using your vehicle’s VIN before we ship it. It arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.
Is there a core charge? Do I have to send my old part back?
Do I need to take this BCM to a dealer for programming?
No. We pre-program the module using your vehicle’s VIN before we ship it. It arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.
What do I do if my airbag light comes on after installation?
Do I need to take this BCM to a dealer for programming?
No. We pre-program the module using your vehicle’s VIN before we ship it. It arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.
Will this part fix my key fob or remote start issues?
Do I need to take this BCM to a dealer for programming?
No. We pre-program the module using your vehicle’s VIN before we ship it. It arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.