Programmed 2008-2010 VUE BCM 15276271 Body Control Module

Restore Your Vue’s Electrical System

End the frustration of flickering lights, faulty power accessories, and no-start conditions with this VIN-programmed Body Control Module. It arrives ready to install, loaded with the latest GM software for your 2008-2010 Saturn VUE. This is a reliable fix that saves you a costly trip to the dealer, and there’s no core charge. Provide your VIN at checkout and get back on the road fast!

+11.99 USPS Priority Shipping
SKU: 591-01465-397 Categories: ,
Guaranteed Safe Checkout

Fix Your GM’s Electrical Gremlins for Good

As a technician with over two decades of experience, I’ve seen it all when it comes to baffling electrical problems. Your power windows have a mind of their own, the dash lights flicker like a haunted house, or worse, your Saturn VUE refuses to start intermittently. These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it goes, chaos ensues. This isn’t a part you can ignore.

We’re offering a dependable, direct-fit solution: a replacement Body Control Module specifically for your vehicle. The best part? We program it to your vehicle’s exact VIN before it leaves our facility. This means you can skip the expensive trip to the dealership and the hassle of finding a shop with the right programming tools. Just provide us with your VIN during checkout, and we’ll handle the rest, ensuring the module arrives ready for installation and loaded with the latest GM software updates.

From the Diagnostic Bay

I remember a 2009 Saturn VUE that came into the shop with a laundry list of complaints from the owner. The radio would turn off randomly, the security light was on, and the driver’s side power lock was dead. The owner had already replaced the battery and checked fuses. After hooking up the scan tool, I saw a dozen communication codes (U-codes) pointing to a network failure. Instead of chasing each individual problem, experience told me to look at the central hub—the BCM. We swapped in a pre-programmed BCM, and like magic, all the phantom issues vanished. It’s a textbook case of how a single failing module can wreak havoc on the entire vehicle.

Common Signs of a Failing BCM

If you’re experiencing any of these symptoms, a faulty BCM is the likely culprit. Replacing it can restore your vehicle’s proper function and your peace of mind.

  • ✔ Intermittent or non-functional power windows, door locks, or interior lights.
  • ✔ Erratic or malfunctioning dashboard gauges and warning lights (e.g., security light).
  • ✔ Problems with the keyless entry or anti-theft system.
  • ✔ Communication error codes, such as U0140, U0155, or a host of other U-codes.
  • ✔ Unexplained battery drain that leaves you with a dead battery overnight.
  • ✔ A no-start condition where the engine cranks but won’t fire up due to a security system fault.

Your Straightforward BCM Installation Guide

Installing your new 2008-2010 VUE BCM is a manageable job for a confident DIYer. Since we program it beforehand, you avoid the most complex step. Always consult your vehicle’s specific service manual for detailed diagrams and torque specs.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
  2. Locate the BCM: On the 2008-2010 Saturn VUE, the BCM is typically located in the center dash area. You will likely need to remove a few trim panels to gain access.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket and remove it.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location and secure it. Reconnect all the electrical connectors, ensuring they click firmly into place.
  5. Reconnect Power: Reattach the negative battery terminal.
  6. Perform Relearns (If Needed): Start the vehicle. In some cases, you may need to perform additional procedures. If the airbag light is on, a “Setup SDM Primary Key in BCM” procedure is required using a professional scan tool. A Brake Pedal Position relearn might also be necessary for proper brake light and traction control operation.

Verified Vehicle Compatibility List

This BCM is a direct replacement for a wide range of GM vehicles and interchanges with numerous part numbers, including 15276271, 25892622, and 20815898. Please confirm your vehicle is on this list. This module is guaranteed to fit the following models with the specified options:

ACADIA 07-12 (LH dash)
AVALANCHE 1500 10 (under steering column), ID 25892622
CAPRICE 11-13
CAPTIVA SPORT 12 (center dash), ID 20921435, 20921436, or 22860591
CTS 08-13 (LH or RH dash)
DTS 06-11 (RH center dash)
ENCLAVE 08-12 (LH dash)
EQUINOX 07-09 (center dash)
ESCALADE 10 (under steering column), ID 20815898 or 25892622
ESCALADE ESV 10 (under steering column), ID 20815898 or 25892622
ESCALADE EXT 10 (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 (center dash)
EXPRESS 2500/3500 VAN 08-12 (center dash)
G8 08-09 (center dash)
HUMMER H2 08-09 (LH firewall)
IMPALA 06-13 (LH dash)
LUCERNE 06-11 (right side dash)
MONTE CARLO 06-07 (LH steering column)
OUTLOOK 07-10 (center dash)
SAVANA 1500 VAN 08-12 (center dash)
SAVANA 2500/3500 VAN 08-12 (center dash)
SRX 07-09 (LH dash)
STS 10 (center dash)
SUBURBAN 1500 10 (under steering column), ID 20815898 or 25892622
TAHOE 10 (under steering column), ID 20815898 or 25892622
TORRENT 07-09 (center dash)
TRAVERSE 09-12 (LH dash)
VUE 08-10 (center dash)
YUKON 10 (under steering column), ID 20815898 or 25892622
YUKON XL 1500 10 (under steering column), ID 20815898 or 25892622

Frequently Asked Questions

Frequently Asked Questions

Do I need to send my old BCM back?

No, there is no core charge for this part. You can keep your original module.

Is this BCM truly plug-and-play?

Because we program it with your VIN, it is designed to be as close to plug-and-play as possible. However, as with any major electronic component replacement, some vehicles may require additional relearn procedures for systems like the airbags or brake pedal sensor, which require a capable scan tool.

What information do you need from me?

After you complete your purchase, you must provide us with your vehicle’s 17-digit VIN (Vehicle Identification Number). We cannot program and ship your 2008-2010 VUE BCM without it.

Will this fix my specific problem?

This module is designed to correct issues directly caused by a failing BCM. While the symptoms we’ve listed are common indicators, we always recommend a proper diagnosis by a qualified mechanic to confirm the BCM is the root cause of your problems before ordering.

What if my airbag light comes on after installation?

This is a known possibility. It means the new BCM needs to be synced with the airbag system’s SDM (Sensing and Diagnostic Module). A technician with a professional scan tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.

Genuine OEM
Year
Condition
MPN

Interchange part number
PartNumber
Model

Brand
Manufacturer Part Number
Scroll to Top