Restore Your GM Vehicle’s Electrical System
Are you battling frustrating electrical gremlins in your vehicle? Flickering lights, malfunctioning power windows, a security system that has a mind of its own, or warning lights that won’t turn off are common signs of a failing Body Control Module (BCM). This isn’t just an annoyance—it’s a critical issue that can affect your vehicle’s performance and safety. Get back in command with this professionally programmed Body Control Module, the central nervous system for your vehicle’s comfort and convenience features.
Common Symptoms & Your Solution
A faulty BCM can cause a wide range of confusing issues. If you’re experiencing any of the following, this module is your definitive solution:
- Interior or exterior lights flickering, staying on, or not working at all
- Power windows, locks, or mirrors operating erratically or not responding
- The security system or keyless entry failing to work correctly
- Unexplained battery drain when the vehicle is off
- Instrument cluster gauges behaving erratically
- Warning lights (like the airbag light) appearing on the dash
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and dealership hassle out of the equation by programming this 2008-2010 Saturn VUE Body Control Module specifically to your vehicle’s VIN before it ever leaves our facility.
Features & Benefits
- ✔ Pre-Programmed to Your VIN: This is the biggest advantage. We flash the module with the latest GM software and your vehicle’s unique information. This means you can skip the expensive and time-consuming trip to the dealership for programming.
- ✔ True Plug-and-Play Installation: Once you receive the module, the primary installation is straightforward. In most cases, you simply install the BCM and you’re ready to go, restoring all body functions instantly.
- ✔ Broad GM Compatibility: This single module is a direct replacement for a wide range of original part numbers, ensuring a perfect match for dozens of GM cars, trucks, and SUVs. See our comprehensive fitment list below.
- ✔ No Core Charge Required: Keep your old module. There’s no need to worry about the cost or hassle of sending a core back to us, simplifying your repair process.
- ✔ Guaranteed Peace of Mind: This unit is backed by our one-year replacement warranty. Drive with confidence knowing your purchase is protected.
Expert Insight: The BCM is Your Vehicle’s ‘Middle Manager’
Think of the BCM as the middle manager for your car’s electronics. It doesn’t control the engine (that’s the ECM/PCM), but it manages almost everything else you interact with from the driver’s seat: your lights, wipers, power windows, security system, and more. When it fails, communication breaks down, leading to the chaotic symptoms you’re experiencing. By providing a BCM that’s already programmed, we handle the most complex part of the repair. We’re not just selling you a part; we’re providing a streamlined solution that saves you time, money, and the headache of dealing with dealership service departments.
Important Post-Installation Information
While this 2008-2010 Saturn VUE Body Control Module is delivered programmed, some vehicles may require one or more simple ‘relearn’ or ‘synchronization’ procedures after installation. These are standard GM service requirements and can often be performed by a well-equipped independent shop if needed.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper function of the brake lights and stability control systems.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Fitment
This module is a direct replacement for the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. It fits a wide variety of GM models including, but not limited to:
- ACADIA 07-12
- AVALANCHE 1500 10
- CAPRICE 11-13
- CAPTIVA SPORT 12
- CTS 08-13
- DTS 06-11
- ENCLAVE 08-12
- EQUINOX 07-09
- ESCALADE / ESV / EXT 10
- EXPRESS VANS 08-12
- G8 08-09
- HUMMER H2 08-09
- IMPALA 06-13
- LUCERNE 06-11
- MONTE CARLO 06-07
- OUTLOOK 07-10
- SAVANA VANS 08-12
- SRX 07-09
- STS 10
- SUBURBAN 1500 10
- TAHOE 10
- TORRENT 07-09
- TRAVERSE 09-12
- VUE 08-10
- YUKON / YUKON XL 1500 10
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle responsible for managing a wide range of electronic accessories not related to the engine. This includes power windows, locks, lights, wipers, security systems, and more. It’s the command center for your vehicle’s body electronics.
How do I know if my BCM is the problem?
Common symptoms of a failing BCM include multiple, unrelated electrical issues happening at once. For example, your radio, power locks, and interior lights might all act up simultaneously. A professional diagnosis with a high-end scan tool is the best way to confirm, but these symptoms are a strong indicator.
Is this part really ready to install out of the box?
Yes, the most critical and difficult step—programming the module to your vehicle’s VIN and specific options—is done by us before shipping. For most vehicles, installation is all that’s needed. However, as noted above, some GM vehicles may require a simple ‘relearn’ procedure for systems like the airbags or brake sensor after the part is installed.
Where do I provide my VIN?
After you complete your purchase, you will need to send us your vehicle’s 17-digit VIN (Vehicle Identification Number). We cannot program and ship your 2008-2010 Saturn VUE Body Control Module without it. Please double-check the VIN for accuracy to ensure proper programming.
What if my airbag light comes on after installation?
This is a known possibility on some GM models. The new BCM needs to be electronically ‘introduced’ to the airbag’s computer (SDM). This is done via a ‘Setup SDM Primary Key in BCM’ procedure, which can be performed by any professional technician with a capable diagnostic tool.
Do I need to send my old part back?
No. This BCM is sold without any core charge. You can keep, discard, or recycle your original part at your convenience.