2008 – 2009 Hummer H2 Body Control Module 25934762 Programmed To Your VIN VIN BCM

Restore Your HUMMER H2’s Electronics

Get a reliable replacement Body Control Module for your 2008-2009 HUMMER H2, delivered pre-programmed to your VIN. This plug-and-play solution fixes common electrical faults and eliminates the need for a dealer visit. Fix your H2’s issues today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1149 Categories: ,
Guaranteed Safe Checkout

Is Your HUMMER H2 Plagued by Electrical Gremlins?

If you’re dealing with bizarre electrical issues in your 2008 or 2009 HUMMER H2, you’re not alone. From power windows with a mind of their own to dashboard warning lights that won’t quit, a failing Body Control Module (BCM) is often the culprit. As the central nervous system for your truck’s accessories, when the BCM goes bad, it can make driving a frustrating and unpredictable experience. You might be seeing symptoms like interior lights not working, security system faults, intermittent no-start conditions, or erratic gauge behavior. Don’t replace random parts hoping for a fix—get to the source of the problem.

The Direct-Fit, Dealer-Free Solution

This is your reliable, straightforward solution: a replacement Body Control Module, part number 25934762, delivered to your door fully programmed for your specific vehicle. We take the guesswork and hassle out of the repair. Simply provide us with your HUMMER’s Vehicle Identification Number (VIN) after purchase, and our technicians will flash the module with the latest official GM software updates. This ensures it communicates perfectly with your H2’s existing systems right out of the box, saving you a costly trip to the dealership for programming.

A Real-World Scenario from My Shop

“A customer brought in his ’08 H2 last month with a classic case of BCM failure. The radio would turn on and off by itself, the door locks were acting up, and he had a persistent ‘Service 4WD’ message, even though the transfer case was fine. After confirming power and grounds were solid, we pinpointed the BCM. Instead of a multi-day wait and a hefty bill from the dealer, we installed one of our pre-programmed modules. In under an hour, all the strange electrical issues were gone. The customer drove away with a reliable truck and saved hundreds on programming fees.”

Why Choose This Pre-Programmed HUMMER H2 BCM?

  • VIN-Programmed for Your H2: We load the latest GM software using your VIN, ensuring 100% compatibility.
  • No Dealer Visit Required: This module is shipped ready for installation, saving you time, towing costs, and expensive dealer programming fees.
  • Restores Full Functionality: Fixes common issues like faulty power accessories, security system errors, and communication faults between modules.
  • Direct Replacement: Guaranteed to fit and function correctly, cross-referencing multiple original part numbers including 25934762, 15880684, and 20815898.
  • Built on 20+ Years of Experience: We’ve diagnosed and solved thousands of complex vehicle electronics issues. We provide the parts that work.

Installation and Post-Install Procedures

For the 2008-2009 HUMMER H2, the BCM is located on the left-hand (driver’s side) firewall. While the physical swap is straightforward for a DIYer or professional, a few critical steps are required after installation to ensure all systems operate correctly.

  1. Safety First: Always disconnect the negative battery terminal before beginning any work on your vehicle’s electrical system.
  2. Locate and Replace: Carefully access the BCM on the LH firewall, disconnect the wiring harnesses, and unbolt the old module. Install the new module in its place and reconnect everything securely.
  3. Reconnect Battery: Once the new BCM is installed, reconnect the negative battery terminal.
  4. Perform Security Relearn: You will likely need to perform a security relearn procedure to allow the vehicle to start. This typically involves turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating two more times.
  5. Critical System Resets: After installation, two key procedures must be performed with a compatible high-level scan tool. This is not optional.
    • Airbag System: Perform the ‘Setup SDM Primary Key in BCM’ procedure to clear the airbag warning light and ensure the safety system is operational.
    • Brake System: Some vehicles require a ‘Brake Pedal Position Sensor Calibration’ to ensure proper brake light operation and stability control function.

If you are not comfortable with these final steps, we strongly recommend seeking assistance from a qualified professional mechanic.

Frequently Asked Questions (FAQ)

How do I know if my BCM is failing?
Common signs include multiple, unrelated electrical problems happening at once, such as power windows/locks failing, erratic dashboard lights, security system alerts, or the vehicle not starting even with a good battery and starter.
Do I have to send you my old BCM?
No, there is no core charge or need to send in your old part. We program a replacement module and ship it directly to you.
Is this a difficult part to install myself?
The physical replacement is manageable for someone with basic mechanical skills. However, the post-installation procedures for the airbag and brake systems require a professional-grade diagnostic tool. Please assess your tool availability before starting.
What information do you need from me?
After you place your order, we simply need the 17-digit Vehicle Identification Number (VIN) from your vehicle’s dashboard or driver’s door jamb sticker. This allows us to program the BCM perfectly for your H2.
Will this fix my check engine light?
A BCM typically controls body functions, not engine performance. If you have a check engine light, the problem is more likely related to the Engine Control Module (ECM) or a powertrain sensor. This BCM will resolve body-related error codes and symptoms.

Guaranteed Fitment & Part Number Compatibility

This module is a direct replacement for the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. While it fits a wide range of GM vehicles, this listing is specifically for a 2008-2009 HUMMER H2 BCM programmed to your VIN.

Genuine OEM

Yes

Condition

Refurbished

MPN

25934762

Interchange part number

PartNumber

591

Model

Hummer H2

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top