VIN-Programmed 2007-2012 Acadia Body Control Module 15880684

Restore Your Acadia’s Electronics

End the frustration of flickering lights, faulty power locks, and other electrical issues with this VIN-programmed Body Control Module. It’s a direct-fit solution for your 2007-2012 GMC Acadia, designed to restore full functionality without a trip to the dealer for expensive programming. Get your vehicle’s convenience and safety features working reliably again. Order today for a straightforward, plug-and-play fix!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-587 Categories: ,
Guaranteed Safe Checkout

Tired of Unpredictable Electrical Problems in Your GMC Acadia?

As a technician with over two decades of experience under the hood, I’ve seen firsthand how a failing Body Control Module (BCM) can turn a reliable vehicle into a source of daily frustration. If your 2007-2012 GMC Acadia is plagued by flickering dash lights, malfunctioning power windows and locks, or a security system that seems to have a mind of its own, you’ve likely pinpointed the culprit. The BCM is the central command for your vehicle’s body electronics, and when it starts to fail, it creates a cascade of confusing and annoying symptoms.

This isn’t just an inconvenience; it can be a safety issue. Imagine your exterior lights failing at night or your door locks not responding when you need them to. You need a solution that is both reliable and straightforward. That’s exactly what we offer: a high-quality replacement 2007-2012 Acadia Body Control Module, professionally programmed with the latest GM software updates specifically for your vehicle’s VIN. This eliminates the need for an expensive trip to the dealership for programming, saving you time and hundreds of dollars.

A Technician’s Notebook

I remember a 2011 Acadia that came into my bay with a classic case of BCM failure. The customer was frustrated because the power liftgate would open on its own, the radio would shut off randomly, and the battery was constantly draining overnight. A scan showed a slew of U-codes (communication errors) between various modules. After confirming power and grounds to the BCM were solid, the diagnosis was clear. The internal logic of the original BCM was shot. We installed one of our VIN-programmed modules, and it was like giving the vehicle a new lease on life. All the strange electrical gremlins vanished instantly. This is the kind of definitive fix we aim to provide for every customer.

Is Your Acadia Displaying These Common BCM Failure Signs?

A faulty BCM can manifest in numerous ways. If you’re noticing any of the following, it’s a strong indicator that your module needs attention:

  • ✔ Intermittent or non-functional power windows, door locks, and mirrors.
  • ✔ Erratic interior or exterior lighting (flickering, staying on, or not turning on at all).
  • ✔ The security system alarm sounding for no reason or the key fob not working.
  • ✔ Dashboard warning lights (like the airbag or service stabilitrak light) illuminating without a clear cause.
  • ✔ Communication error codes (often starting with ‘U’) when scanned with a diagnostic tool.
  • ✔ A no-start condition where the engine cranks but won’t fire up, often related to the anti-theft system.

A Straightforward Guide to Your BCM Installation

Replacing the BCM in your Acadia is a manageable job for a DIYer with basic tools. Our pre-programming service makes it a true plug-and-play process. Here’s a general guide:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before starting any electrical work.
  2. Locate the BCM: On the 2007-2012 Acadia, the Body Control Module is typically located on the driver’s side, up under the dashboard to the left of the steering column. You may need to remove a lower dash panel for access.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
  4. Install the New Module: Mount your new, VIN-programmed BCM in the same location and securely reconnect all the electrical harnesses. Ensure they click into place.
  5. Reconnect Power: Re-attach the negative battery terminal.
  6. Test Functionality: Start the vehicle and test all the components controlled by the BCM—lights, locks, windows, wipers, etc.—to confirm the repair was successful.

Important Post-Installation Information

While our programming handles the heavy lifting, some GM vehicles may require a simple relearn procedure after installation. Please be aware of the following:

  • Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system. This is only necessary if the light appears.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure proper brake light and traction control operation.

Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a qualified professional if you are unsure about any step.

Guaranteed Vehicle Compatibility

This module is a direct replacement for a wide range of GM vehicles. Please verify your part number and vehicle model from the list below to ensure perfect fitment. This part is a direct replacement for part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.

ACADIA 07-12 Body Control (BCM); (LH dash)
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, or 22860591
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE & ESV & EXT 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
EXPRESS/SAVANA VANS 08-12 Body Control (BCM)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-13 Body Control (BCM); (LH dash)
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON & YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622

Frequently Asked Questions

Frequently Asked Questions

How do I provide my VIN for programming?

After completing your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We will program the module with the latest GM software matched to your vehicle before shipping.

What is your core policy? Do I need to send my old BCM back?

No core charge or return is required. However, our cloning service involves transferring data from your original module. We will return your original module to you along with the programmed replacement unit.

What tools do I need for installation?

Basic hand tools are typically all that’s required, such as a socket set and a trim removal tool to access the module under the dash. No special programming tools are needed on your end.

Why is my airbag light on after installing the new BCM?

This can happen because the new BCM needs to be electronically ‘introduced’ to the vehicle’s airbag system (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure using a bi-directional scan tool, which a professional mechanic can perform.

Is this a simple plug-and-play installation?

Yes, for over 95% of vehicles. Because we program it to your VIN, it should work immediately upon installation. In rare cases, the minor relearn procedures mentioned above may be necessary.

Genuine OEM
Condition
MPN

15880684

Interchange part number
PartNumber
Model

ACADIA

Year
Brand
Manufacturer Part Number
Scroll to Top