Programmed 2007-2010 Outlook Body Control Module 15828601

End Your Outlook’s Electrical Gremlins

Tired of flickering lights, faulty power accessories, or random warning messages in your 2007-2010 Saturn Outlook? This Body Control Module (BCM) is your solution. It arrives pre-programmed to your vehicle’s VIN, eliminating the need for expensive dealership visits. Restore your vehicle’s electronic functions and reliability with this easy-to-install part. Get back on the road with confidence—order yours today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-472 Categories: ,
Guaranteed Safe Checkout

Restore Full Functionality to Your Saturn Outlook

If you’re dealing with bizarre electrical issues in your 2007-2010 Saturn Outlook—like flickering lights, malfunctioning power windows or locks, or a security system that has a mind of its own—a failing Body Control Module (BCM) is often the culprit. As the central nervous system for your vehicle’s electronics, a faulty BCM can cause a cascade of frustrating and hard-to-diagnose problems. This isn’t just an inconvenience; it can affect vehicle security and drivability. This replacement 2007-2010 Outlook Body Control Module is the direct, reliable solution to restore order and get your vehicle operating as it should.

We take the guesswork and dealership hassle out of the equation. Unlike a standard replacement that requires expensive trips for programming, this module arrives at your door pre-programmed with the latest GM software updates, specifically matched to your vehicle’s VIN. Simply provide your VIN at checkout, and we handle the rest. This ensures seamless integration with your Outlook’s existing systems, making the installation process as straightforward as possible for both seasoned mechanics and determined DIYers.

A Technician’s Notebook: The Saturn with a Mind of Its Own

I once had a 2008 Saturn Outlook in my bay that was driving the owner crazy. The radio would turn on and off, the dome lights would stay on, and occasionally the car wouldn’t start, showing a ‘Service Theft System’ message. They had been to two other shops that couldn’t pinpoint the issue. After checking the main power and grounds, I hooked up my scan tool and saw multiple communication loss codes (U-codes) with various modules. This pointed directly to the BCM. Instead of a costly new unit from the dealer, we installed a pre-programmed module. The swap took less than an hour, and instantly, all the electrical gremlins were gone. It’s a perfect example of how a single component can create widespread, confusing symptoms.

Is Your Outlook Showing These Symptoms?

  • âś” Erratic or non-functional interior and exterior lights.
  • âś” Power windows, door locks, or mirrors working intermittently or not at all.
  • âś” The security system acting up, causing no-start conditions or false alarms.
  • âś” Instrument cluster gauges behaving erratically or warning lights staying on.
  • âś” Communication error codes, such as U0140, U0155, or other U-series DTCs.
  • âś” Unexplained battery drain when the vehicle is turned off.

A Straightforward Guide to Installation

  1. âś” Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the systems to fully discharge.
  2. âś” Locate the BCM: On the 2007-2010 Saturn Outlook, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or a lower dash panel.
  3. âś” Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
  4. âś” Install the New Module: Mount your new, pre-programmed BCM in the same location. Securely reconnect all electrical connectors, ensuring they click into place.
  5. âś” Reconnect Power: Reattach the negative battery terminal. Turn the key to the ‘On’ position (without starting the engine) for 10-15 seconds to allow the systems to initialize.
  6. ✔ Perform Post-Install Checks: Start the vehicle and test all body functions—lights, locks, windows, radio, etc. As noted below, some vehicles may require additional relearn procedures for the airbag or brake systems if warning lights appear.

Important Post-Installation Information

While this module is programmed for your VIN, certain vehicle systems may require a ‘handshake’ after installation. A Brake Pedal Position Relearn might be needed for proper brake light and traction control operation. Additionally, if the airbag light is on, a professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure. These are standard GM procedures and do not indicate a problem with the module.

Verified Vehicle Compatibility

This BCM is a direct replacement for part number 15828601 and is interchangeable with a wide range of other GM part numbers. It is guaranteed to fit the 2007-2010 Saturn Outlook. It also fits many other GM vehicles, including:

ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, EXPRESS/SAVANA VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, SRX 07-09, STS 10, SUBURBAN 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10.
Please verify your part number or contact us with your VIN to ensure perfect fitment.

Frequently Asked Questions

Why do you need my VIN?

Your Vehicle Identification Number (VIN) is essential for us to program the Body Control Module with the correct software and vehicle-specific options for your 2007-2010 Outlook. This ensures it communicates properly with your car’s other systems right out of the box.

Is this a plug-and-play part?

Yes, because we program it to your VIN, it is designed to be as close to plug-and-play as possible. However, as with many modern vehicle electronics, some models may require additional relearn procedures for systems like the airbag or brake pedal sensor, which may require a scan tool.

Do I need to return my old BCM?

No, there is no core charge for this module. You can keep your original part.

What if my airbag light comes on after installation?

This is a known possibility on some GM vehicles. It means the new BCM needs to be synced with the airbag’s Sensing and Diagnostic Module (SDM). A repair shop with a professional-grade scan tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve it.

Will this fix my specific problem?

This module corrects issues directly caused by a failing BCM. While it resolves the most common electrical problems, it’s crucial to ensure your vehicle has been properly diagnosed. Problems with wiring, grounds, or other modules can sometimes mimic BCM failure.

Genuine OEM

Yes

Condition

Refurbished

MPN

15828601

Interchange part number

PartNumber

591

Model

OUTLOOK

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top