Restore Full Functionality to Your Saturn Outlook with a Hassle-Free BCM Solution
Are you battling bizarre electrical issues in your 2007-2010 Saturn Outlook? Things like power windows with a mind of their own, interior lights flickering, a security system that won’t cooperate, or even a frustrating no-start condition can often be traced back to a single culprit: a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, when the BCM starts to fail, it can create a cascade of confusing and annoying problems. This isn’t just an inconvenience; it can impact your vehicle’s safety and reliability.
Instead of facing a costly trip to the dealership for a new module and expensive programming fees, we offer a streamlined and reliable solution. This listing is for a direct-replacement BCM complete with our professional Cloning Service. We transfer the essential configuration data from your original, failing module to this replacement unit. The result is a true plug-and-play component that is ready for installation right out of the box, with no additional programming required.
Case Study: A Tricky Diagnosis
I remember a 2008 Saturn Outlook that came into my shop with a laundry list of complaints from the owner. The radio would randomly shut off, the driver’s side power window worked intermittently, and the remote keyless entry was completely dead. The owner had already replaced the battery and checked all the fuses. A scan revealed a slew of communication error codes, primarily U0140 (Lost Communication with BCM). After confirming power and ground at the BCM connector, it was clear the module itself was the issue. A new BCM from the dealer would have meant towing the vehicle and a hefty bill for programming. Instead, we used our cloning service. Within a day, the customer had a perfectly functioning vehicle again, saving them hundreds of dollars and significant downtime.
Is Your Saturn Outlook Showing These Symptoms?
A failing BCM can manifest in many ways. If you’re experiencing any of the following, your Body Control Module is the likely cause. This service for your 2007-2010 Outlook BCM is designed to be the definitive fix.
- ✔ Erratic or non-functional power windows, door locks, or interior lighting.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Security system faults or the anti-theft light staying illuminated.
- ✔ Remote keyless entry (fob) failing to work.
- ✔ Instrument cluster warning lights appearing randomly (e.g., airbag, ABS).
- ✔ Communication Diagnostic Trouble Codes (DTCs) like U0140, U0155, or other U-codes.
- ✔ Intermittent no-start or no-crank conditions where the engine computer doesn’t get the ‘okay’ signal.
A Straightforward Guide to Your BCM Installation
Our cloning service makes the physical swap simple. Since the module arrives ready to go, you can get your vehicle back to normal with basic hand tools.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait about 10 minutes to allow all systems to discharge.
- Locate the BCM: On the 2007-2010 Saturn Outlook, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or lower dash panels.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt the module from its mounting bracket and remove it from the vehicle.
- Install the New Module: Mount the replacement BCM in the same location and securely fasten it. Reconnect all electrical connectors, ensuring they click firmly into place.
- Power Up: Reconnect the negative battery terminal.
- Test All Functions: Start the vehicle and test all body-related functions: power windows, locks, lights, radio, wipers, and key fob to confirm the repair.
Important Post-Installation Notes
While our cloning service handles the main programming, some vehicle systems may require a relearn procedure after the BCM is installed and the battery is reconnected. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure may be needed. This requires a professional-grade scan tool to sync the modules.
- Brake Pedal Position Relearn: On some models, a recalibration of the brake pedal position sensor might be necessary to ensure correct operation of the brake lights and stability control systems.
Disclaimer: Specific procedures can vary by exact model and year. Always consult a factory service manual or a qualified technician if you are unsure about any step.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 25934763 and interchanges with a wide range of part numbers. It is compatible with the following vehicles, but please verify your part number before ordering.
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, 22860591
CTS 08 Body Control (BCM); RH dash
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 08-12 Body Control (BCM)
EXPRESS 3500 VAN 08-12 Body Control (BCM)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-12 Body Control (BCM); (LH dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
SAVANA 2500 VAN 08-12 Body Control (BCM)
SAVANA 3500 VAN 08-12 Body Control (BCM)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
Frequently Asked Questions
How does the Cloning Service work?
After you place your order, you will send us your original Body Control Module. Our technicians will use specialized equipment to read the unique vehicle data from your module—including key information and specific options—and transfer it directly onto the replacement unit. This makes the new part an exact electronic match for your vehicle.
Do I need to provide my VIN?
For our cloning service, the VIN is not required because we are copying all necessary data directly from your original module. The most important thing is to send us your original BCM after purchase.
Is this a difficult part to install myself?
For someone with basic mechanical skills, this is a very manageable job. The main challenge is accessing the module’s location within the dash. Since our cloning service eliminates the need for computer programming, the installation is a straightforward plug-and-play process.
What happens to my original BCM?
Our policy is to always return your original module to you along with the newly programmed replacement. We do not keep customer cores, so you will get your original part back.
What tools do I need for the installation?
You will typically only need basic hand tools, such as a socket set, screwdrivers, and possibly some interior trim removal tools to access the BCM without damaging your dash panels.