Restore Your Saturn’s Electrical System with a VIN-Programmed BCM
Are you dealing with baffling electrical issues in your 2007–2010 Saturn Outlook? Flickering dash lights, power windows with a mind of their own, or a security system that randomly prevents your car from starting? These are classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s comfort and convenience features, and when it malfunctions, it can cause a cascade of frustrating problems. Don’t let electrical gremlins sideline your vehicle. This direct-fit BCM is the reliable, straightforward solution you need.
We take the guesswork and high dealership costs out of the repair. Simply provide your vehicle’s VIN at checkout, and our technicians will program this module with the latest official GM software specific to your Saturn Outlook. This means it arrives at your door ready for installation, with no need for expensive specialty scan tools or a trip to the dealer for programming. It’s the most efficient way to get your vehicle back to 100% functionality.
Case Study: A Tricky Diagnosis
A customer’s 2008 Saturn Outlook came into my shop last month with a truly frustrating set of symptoms. The radio would turn on and off, the power locks worked intermittently, and occasionally, the vehicle wouldn’t start, showing a security light on the dash. The owner had already replaced the battery and checked the fuses. After connecting my diagnostic tool, I saw multiple communication error codes pointing toward the BCM. Instead of a costly and time-consuming dealer visit, we ordered a VIN-programmed module. The installation was simple, and because it was pre-flashed, the vehicle’s systems immediately recognized it. This 2007–2010 Outlook BCM was the key to a fast, one-and-done repair, saving my customer hundreds of dollars and significant hassle.
Is Your Saturn Outlook Showing These Signs?
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic interior or exterior lighting behavior.
- ✔ The security or anti-theft system activating incorrectly, causing a no-start condition.
- ✔ Dashboard warning lights that flicker or stay on without a clear cause.
- ✔ Communication errors with other vehicle modules (DTCs).
- ✔ Remote keyless entry failing to work properly.
Your Straightforward BCM Installation Guide
Replacing the BCM is a manageable job for a confident DIYer. While the exact location can vary slightly, it’s typically found in the center dash area on the Saturn Outlook.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes for the system capacitors to discharge.
- Locate the BCM: On the Outlook, the BCM is generally located behind the center console or lower part of the dashboard. You may need to remove a few trim panels for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be pressed to release. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
- Perform Post-Installation Procedures: Reconnect the battery. You will now need to perform a couple of critical relearn procedures as outlined below.
Important: Post-Installation Relearn Procedures
After installing your new 2007–2010 Outlook BCM, a few steps are necessary to ensure all systems work together correctly. Failure to do so can result in warning lights or improper function.
- Airbag System (SRS): The ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-end diagnostic scan tool. This syncs the new BCM with the airbag module and will clear the airbag warning light.
- Brake Pedal Position Sensor: Some vehicles require the Brake Pedal Position Sensor to be recalibrated after BCM replacement. This ensures the brake lights and stability control systems function as intended.
- Professional Help: If you are not equipped with a tool that can perform these functions, a professional mechanic can complete these relearn procedures for you quickly.
Verified Fitment for Your GM Vehicle
This BCM, part number 25934762, is a direct replacement for a wide range of GM vehicles. It is guaranteed to fit the 2007–2010 Outlook BCM and is also compatible with the following original part numbers and models:
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Fits Models Including: Acadia (07-12), Avalanche 1500 (10), Caprice (11-13), Captiva Sport (12), CTS (08-13), DTS (06-11), Enclave (08-12), Equinox (07-09), Escalade/ESV/EXT (10), Express/Savana Vans (08-12), G8 (08-09), Hummer H2 (08-09), Impala (06-13), Lucerne (06-11), Monte Carlo (06-07), SRX (07-09), STS (10), Suburban 1500 (10), Tahoe (10), Torrent (07-09), Traverse (09-12), Vue (08-10), Yukon/Yukon XL 1500 (10), and more. Please verify your part number or contact us with your VIN to confirm compatibility.
Frequently Asked Questions
Why do I need to provide my VIN?
Your Vehicle Identification Number (VIN) allows us to flash the BCM with the exact software and settings your vehicle’s specific options require. This ensures perfect compatibility and function right out of the box, eliminating the need for dealer programming.
Is this a difficult part to install myself?
For someone with moderate mechanical skill, it is a manageable task. The main challenge is typically accessing the module behind the dashboard panels. The physical swap is just a few connectors and bolts. The most critical part is performing the post-installation relearn procedures.
What happens if I don’t do the airbag and brake relearn procedures?
If you skip the ‘Setup SDM Primary Key’ procedure, the airbag warning light will remain on, and the SRS system may not function correctly in an emergency. Failing to recalibrate the brake pedal sensor (if required for your vehicle) can affect brake light operation and stability control performance.
Will this fix my car’s no-start problem?
If your no-start issue is caused by the anti-theft system being incorrectly triggered by a faulty BCM, then yes, this part is very likely to be the solution. A BCM is a common cause for security-related starting problems on these vehicles.