Is Your Jeep Compass Experiencing Frustrating Engine Problems?
If you’re dealing with a 2007-2010 Jeep Compass that’s stalling, refusing to start, showing a persistent check engine light, or running rough, a failing Engine Control Module (ECM) is a very likely culprit. As the brain of your vehicle, when the ECM falters, it can cause a cascade of confusing and costly issues. I’ve seen it countless times in my 20+ years as a technician: owners replace sensors, pumps, and spark plugs, only to find the root problem was the computer all along.
A Technician’s Real-World Experience
“A customer’s 2009 Compass came into my shop last week with these exact symptoms. It would crank but not start, and the owner had already replaced the fuel pump to no avail. A quick scan with my diagnostic tool showed a ‘U0100 – Lost Communication with ECM/PCM’ code. After verifying the main power and ground connections to the module were solid, it was clear the internal circuitry of the ECM had failed. This is a classic failure mode for these vehicles, often leading to a frustrating no-start condition that can leave you stranded.”
The Direct Solution: A Reliable, Programmed 2007-2010 Compass Engine Computer
Don’t guess with your repair. This replacement engine computer is the definitive fix for a faulty module, arriving at your door fully programmed and ready for installation. We take the hassle out of the repair by flashing the unit with your vehicle’s specific VIN and mileage before it ships. This means no expensive trips to the dealership for programmingโit’s a true plug-and-play solution.
- โ Eliminate Guesswork: Directly addresses common symptoms like no-start conditions, erratic engine performance, and false sensor codes.
- โ 100% Plug & Play: No dealer visit needed. We program the module to your VIN, so you can install it yourself and get back on the road.
- โ Save Time and Money: Avoid costly diagnostic fees and the high price of a new module from a dealership.
- โ Restore Peak Performance: A functioning ECM ensures your engine receives the correct signals for optimal fuel delivery, ignition timing, and emissions control.
Plug-and-Play Installation: No Dealer Visit Required
Installing your replacement 2007-2010 Compass Engine Computer is a straightforward process that you can do in your own driveway. Follow these simple steps:
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the ECM: On the Jeep Compass, the ECM is typically located in the engine bay, often near the battery or firewall.
- Disconnect Connectors: Carefully unclip the wiring harness connectors from the old module. Inspect the pins for any corrosion or damage before proceeding.
- Remove the Old Module: Unbolt the old ECM from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed ECM in place and securely fasten the bolts.
- Reconnect Everything: Firmly plug the wiring harness connectors into the new module until they click. Reconnect the negative battery terminal.
- Final Step: Start the vehicle and let it run for a few minutes. Your Compass is now ready to drive!
Guaranteed Compatibility
This module is a direct replacement for a wide range of part numbers and is guaranteed to be compatible with the following vehicles and configurations. Please verify your part number or vehicle details to ensure a perfect fit.
This ECM is a direct fit for part number 04692101AE and interchanges with the following:
05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA
This part will fit these makes and models with these options
COMPASS 07-10 Electronic Control Module
PATRIOT 07-10 Electronic Control Module
CALIBER 07-08 Electronic Control Module
CALIBER 09 Electronic Control Module; 1.8L
CALIBER 09 Electronic Control Module; 2.0L, gasoline
CALIBER 10 Electronic Control Module; 2.0L
CALIBER 09 Electronic Control Module; 2.4L, engine opt ED3
CALIBER 10 Electronic Control Module; 2.4L