Programmed 2007-2009 SRX Body Control Module BCM 25847588

Restore Your SRX’s Electrical System

Tired of erratic lights, dead power accessories, or key fob issues? This Body Control Module is the fix. It arrives programmed to your VIN with the latest GM software for a true plug-and-play solution. Fix your SRX’s electrical gremlins for good. Order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1043 Categories: ,
Guaranteed Safe Checkout

Is Your Cadillac SRX Experiencing Bizarre Electrical Problems?

If you’re dealing with flickering lights, power windows with a mind of their own, a dead remote, or a dashboard that’s lit up with random warnings, you’re likely facing a failing Body Control Module (BCM). As the central nervous system for your vehicle’s comfort and convenience features, a faulty BCM can turn your luxury SUV into a source of constant frustration. In my 20+ years as a technician, I’ve seen how a bad BCM can mimic a dozen other problems, leading to wasted time and money on incorrect diagnoses.

This isn’t just a replacement part; it’s a direct solution. We are offering a genuine GM Body Control Module, part number 25847588, that comes fully programmed to your vehicle’s specific VIN. This means no expensive trips to the dealership for coding. We install the latest GM software updates, ensuring optimal performance and resolving many of the glitches that may have developed over the years. You get a module that is truly ready for installation right out of the box.

Common Symptoms of a Failing BCM in a 2007-2009 SRX:

  • โœ” Power locks, windows, or mirrors operating erratically or not at all.
  • โœ” Interior or exterior lights staying on, draining your battery.
  • โœ” Key fob (remote) not responding.
  • โœ” Security system faults or anti-theft light staying illuminated.
  • โœ” False warnings appearing on the driver information center (DIC).
  • โœ” In some cases, a no-start condition where the BCM fails to communicate with the powertrain.

Expert Pro Tip: Check for Water Intrusion

Before you replace the BCM in your SRX, take a moment to inspect the area around the left-hand (driver’s side) dash and A-pillar for any signs of water leaks. A very common cause of BCM failure in these vehicles is water dripping from a clogged sunroof drain or a bad windshield seal directly onto the module’s connectors. Simply replacing the part without fixing the leak will lead to another failure down the road. A quick inspection can save you from a repeat repair.

Plug-and-Play Solution for Your 2007-2009 SRX Body Control Module

Forget the hassle and expense of dealer programming. By providing us with your VIN during checkout, you receive a module that is perfectly matched to your SRX’s factory options. This process ensures all systems communicate correctly from the moment you plug it in.

Simple Installation Process:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
  2. Locate the BCM: On the 2007-2009 Cadillac SRX, the BCM is typically located on the left-hand side of the dash, often near the steering column or kick panel area.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old module. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the old BCM and remove it from the vehicle.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
  5. Reconnect Battery: Reattach the negative battery terminal.
  6. Perform Final Procedures: Follow the required post-installation steps outlined below to ensure full system functionality.

Important Post-Installation Requirements

After installing your new BCM, a few final steps are necessary to sync the module with your vehicle’s safety systems. These procedures require a professional-grade scan tool.

  • Airbag System Sync: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This step is critical to clear the airbag warning light and ensure the safety restraint system is operational.
  • Brake Sensor Calibration: Some vehicles may require a ‘Brake Pedal Position Sensor Calibration’ to ensure the brake lights and stability control systems function correctly.

Guaranteed Compatibility

This module is a direct replacement for a wide range of part numbers, ensuring a perfect fit for your vehicle. It is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.

Genuine OEM

Yes

Condition

Refurbished

MPN

25847588

Interchange part number

PartNumber

591

Model

SRX

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top