Are you battling frustrating electrical problems in your GM vehicle? Flickering lights, malfunctioning power windows or locks, a security system that acts on its own, or a vehicle that refuses to start can often be traced back to a single component: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it malfunctions, it can cause widespread and unpredictable issues. This replacement Body Control Module, part number 25910474, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
This isn’t just a part in a box. We provide a crucial service that sets our modules apart. Before this BCM ships, we program it with the latest official GM software, specifically matched to your vehicle using your VIN. This means you receive a component that is truly plug-and-play, eliminating the need for an expensive trip to the dealership for programming. Simply provide your VIN at checkout, and we handle the rest, ensuring a seamless and correct installation.
Diagnosing and Replacing Your 2007-2009 Equinox Body Control Module
A faulty BCM can be difficult to diagnose because its symptoms often mimic other electrical failures. If you’ve checked fuses and relays to no avail, the BCM is the next logical culprit. Replacing it with our pre-programmed unit is a straightforward process for a DIY mechanic or any professional technician, restoring functionality and peace of mind.
Common Symptoms of a Failing BCM:
- ✔ Erratic or non-functional interior and exterior lights
- ✔ Power windows, door locks, or mirrors not working correctly
- ✔ Malfunctioning security system or keyless entry
- ✔ Instrument cluster warning lights (like the airbag light) illuminating for no reason
- ✔ Intermittent no-start condition where the engine cranks but won’t fire
- ✔ Radio or climate control systems behaving erratically
Post-Installation Information
While our BCMs are programmed for plug-and-play installation, some vehicles may require simple relearn procedures after the new module is connected. These are not signs of a defective part but are standard vehicle-specific security handshakes.
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
This BCM is a direct replacement for the following part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Guaranteed Fitment For These Makes & Models:
This module fits a wide range of GM vehicles. Please verify your part number or contact us with your VIN to confirm compatibility.
- ACADIA 07-12 Body Control (BCM); (LH dash)
- AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
- CAPRICE 11-13 Body Control (BCM)
- CAPTIVA SPORT 12 Body Control (BCM); (center dash)
- CTS 08-13 Body Control (BCM); LH dash
- DTS 06-11 Body Control (BCM); (RH center dash)
- ENCLAVE 08-12 Body Control (BCM); (LH dash)
- EQUINOX 07-09 Body Control (BCM); (center dash)
- ESCALADE 10 Body Control (BCM); (under steering column)
- ESCALADE ESV 10 Body Control (BCM); (under steering column)
- ESCALADE EXT 10 Body Control (BCM); (under steering column)
- EXPRESS VANS 08-12 Body Control (BCM)
- G8 08-09 Body Control (BCM); (center dash)
- HUMMER H2 08-09 Body Control (BCM); (LH firewall)
- IMPALA 06-13 Body Control (BCM); (LH dash)
- LUCERNE 06-11 Body Control (BCM); (right side dash)
- MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
- OUTLOOK 07-10 Body Control (BCM); (center dash)
- SAVANA VANS 08-12 Body Control (BCM)
- SRX 07-09 Body Control (BCM); LH dash
- STS 10 Body Control (BCM); center dash
- SUBURBAN 1500 10 Body Control (BCM); (under steering column)
- TAHOE 10 Body Control (BCM); (under steering column)
- TORRENT 07-09 Body Control (BCM); (center dash)
- TRAVERSE 09-12 Body Control (BCM); (LH dash)
- VUE 08-10 Body Control (BCM); (center dash)
- YUKON 10 Body Control (BCM); (under steering column)
- YUKON XL 1500 10 Body Control (BCM); (under steering column)
Frequently Asked Questions
What does a Body Control Module (BCM) do?
The BCM acts as the central computer for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, lights, wipers, security system, and instrument panel functions.
Is this BCM difficult to install?
For most models, the BCM is located under the dashboard and is accessible with basic hand tools. Because we pre-program the module to your VIN, the physical installation is typically a simple plug-and-play process, with no dealer programming required.
How do I provide my VIN?
After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot program and ship your module without it.
Will this fix my specific electrical problem?
This BCM will correct any issue directly caused by a faulty BCM. While the symptoms listed are very common, we always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root cause of your problem before ordering.
What if the airbag light is on after I install it?
This is a normal security measure on some GM vehicles. The new BCM needs to be electronically introduced to the airbag system (SDM). This procedure, called ‘Setup SDM Primary Key in BCM’, must be done with a professional-grade scan tool.
Is there a core charge?
No, there is no core charge for this module. You can keep your original part.