Programmed 2007-2009 Equinox BCM 25934762 | Body Control Module Cloning Service

Restore Full Electrical Function to Your GM Vehicle

If your 2007-2009 Chevrolet Equinox is suffering from a case of electrical gremlins—like flickering lights, malfunctioning power windows and locks, or a security system that has a mind of its own—a failing Body Control Module (BCM) is the most common cause. The BCM acts as the central hub for your vehicle’s body electronics. When it fails, it can cause a wide range of frustrating and unpredictable problems. This replacement Body Control Module, part number 25934762, is the definitive solution to restore your vehicle’s reliability and functionality.

We take the guesswork and high dealership costs out of the equation. Before we ship your part, we use the VIN you provide to program the module with the latest GM software specific to your vehicle. This service ensures that the replacement BCM integrates seamlessly with your Equinox’s existing systems, making the installation process as straightforward as possible for a DIYer or professional mechanic.

Signs of a Failing Body Control Module

• ✔ Unpredictable power window or door lock operation.
• ✔ Interior or exterior lights staying on, flickering, or not working at all.
• ✔ The security system or keyless entry failing intermittently.
• ✔ Dashboard warning lights appearing for no reason (e.g., ABS, Airbag).
• ✔ Communication error codes, often in the Uxxxx range (like U0100, U0140), indicating a loss of communication between modules.
• ✔ In severe cases, a no-start condition where the ignition seems dead.

Your Straightforward BCM Installation Guide

1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
2. ✔ Locate the BCM: On the 2007-2009 Equinox, the BCM is typically located in the center dash area. You may need to remove a lower dash panel or glove box for access.
3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
4. ✔ Install the New Module: Mount the new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
5. ✔ Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position (without starting the engine) and test all body functions: lights, locks, windows, wipers, and radio.

Important Post-Installation Steps

While our programming handles the critical vehicle data, some systems may require a ‘handshake’ with the new BCM. Be aware of the following potential procedures:

• Airbag System Sync: If your airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
• Brake Pedal Position Relearn: On some models, a brake pedal position relearn might be required to ensure correct brake light operation and to prevent issues with the traction control system.

Verified Fitment Across Multiple GM Models

This BCM is a direct replacement for a wide array of GM vehicles. Please verify your part number and model from the list below. This module is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.