Programmed 2007-2009 Equinox BCM 25847588 | VIN Matched & Ready to Install

Restore Your Equinox’s Electronics!

Tired of erratic power windows, security system faults, or other electrical issues? This Body Control Module (BCM) is the solution. It arrives pre-programmed to your VIN, eliminating the need for a dealer visit. Get your 2007-2009 Equinox working correctly again. Fix your issue today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1030 Categories: ,
Guaranteed Safe Checkout

Is Your Equinox Acting Possessed?

If you’re dealing with a frustrating mix of electrical gremlins in your 2007-2009 Chevrolet Equinox, you’re not alone. One day the power windows have a mind of their own, the next the radio won’t turn off, or you’re getting a persistent “Service Theft System” light on the dash. These aren’t separate problems; they’re classic symptoms of a failing Body Control Module (BCM), the central computer for your vehicle’s body electronics.

From the Shop Floor: A Common Diagnostic Trap

“Just last month, a customer brought in his ’08 Equinox. He’d already replaced the driver’s side window switch twice, convinced it was faulty because the window would only work intermittently. His scan tool showed no codes. After a quick check, we found the issue wasn’t the switch at all, but a failing 2007-2009 Equinox BCM that was sending erratic signals. It’s a textbook case I’ve seen hundreds of times. The BCM is the brain, and when it gets confused, the symptoms can pop up anywhere.”

The Direct Solution: No Dealer Programming Required

Forget expensive diagnostic fees and the hassle of getting your vehicle towed to a dealership for programming. We solve the problem before the part even leaves our hands. This BCM, part number 25847588, is the definitive fix for your vehicle’s electronic woes. Simply provide us with your vehicle’s VIN during checkout, and our technicians will flash the module with the latest GM-certified software specific to your Equinox. It arrives at your door ready for a straightforward installation.

Common Symptoms of a Failing GM BCM:

  • โœ” Power windows, door locks, or mirrors operating erratically or not at all.
  • โœ” Interior dome lights or dashboard lights staying on or failing to illuminate.
  • โœ” The security or anti-theft system light is on, preventing the vehicle from starting.
  • โœ” Wipers or turn signals behaving unpredictably.
  • โœ” False warnings appearing on the instrument cluster.
  • โœ” Communication issues between various electronic modules.

Simple Installation Guide

Replacing the BCM on your Equinox is a manageable DIY job. The module is typically located in the center dash area.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes for the system to discharge completely.
  2. Locate the BCM: On the 2007-2009 Equinox, the BCM is found in the center console stack, often accessible by removing the side panels of the console in the passenger footwell.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt the old BCM and remove it.
  4. Install the New Module: Seat your new, pre-programmed BCM in place and secure it. Reconnect all electrical connectors firmly until they click.
  5. Reconnect Power: Reattach the negative battery terminal.

Important Final Steps: Post-Installation Procedures

After installing your new 2007-2009 Equinox BCM, a few final steps are required to ensure all systems communicate correctly. These procedures require a professional-grade bidirectional scan tool.

  • Airbag System Reset: The airbag warning light will likely be on. You must perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM). This is a critical safety step.
  • Brake Pedal Position Sensor Relearn: Some vehicles require a recalibration of the brake pedal position sensor. This ensures the brake lights and stability control systems function correctly.

Note: While this part is pre-programmed, these final relearn procedures are essential for full integration. If you are not equipped to perform these steps, we strongly recommend seeking assistance from a qualified local mechanic.

Guaranteed Compatibility

This BCM is a direct replacement for a wide range of original part numbers, ensuring a perfect fit and function for your vehicle. It is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. It also fits a wide array of GM vehicles including the Acadia, Traverse, Impala, Tahoe, Express vans, and more. Please verify your vehicle in the fitment chart.

Genuine OEM

Yes

Condition

Refurbished

MPN

25847588

Interchange part number

PartNumber

591

Model

EQUINOX

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top