End the Frustration and Restore Your Saab’s Performance
Is your 2006 Saab 9-7X running rough, throwing confusing check engine lights, or failing to start altogether? A faulty Powertrain Control Module (PCM) can be the hidden culprit behind a host of frustrating issues, turning your reliable vehicle into a source of daily stress. This isn’t just an inconvenience; it’s a matter of safety and peace of mind. We’re here to provide the definitive solution: a professionally programmed PCM, tailored specifically to your vehicle, that gets you back on the road with confidence.
Forget the costly dealership visits and the uncertainty of used, unprogrammed modules. We take the guesswork out of the repair. Simply provide us with your vehicle’s VIN after purchase, and our experts will flash this module with the latest GM software updates for your exact vehicle. It arrives at your doorstep ready for a straightforward installation, making this a repair you can tackle with ease.
Warning Signs and How to Overcome Them
If you’re experiencing any of the following, a failing PCM is a likely cause. Replacing it can restore your vehicle’s health and your driving enjoyment.
- ✔ Check Engine Light: Persistent illumination, often with codes like P0601, P0602, P0605, or P0606.
- ✔ Poor Engine Performance: Noticeable loss of power, hesitation during acceleration, or rough idling.
- ✔ Reduced Fuel Economy: Your Saab is suddenly consuming more fuel than usual without a change in driving habits.
- ✔ Intermittent Stalling: The engine cuts out unexpectedly while driving or at a stop.
- ✔ Harsh or Incorrect Shifting: The automatic transmission may shift erratically or get stuck in a gear.
- ✔ No-Start Condition: The engine cranks but refuses to start, even with a good battery and starter.
An Expert’s Note: The VIN Programming Difference
“I remember a customer, Mark, who was at his wit’s end with his Trailblazer—a cousin to this 9-7X. He’d bought a used computer online, and while it plugged in, the car ran worse than before. The anti-theft system kept engaging, and the transmission was completely lost. The problem? It wasn’t programmed to his vehicle’s specific VIN. Every vehicle has unique calibrations. When we sent him one of our pre-programmed modules, he called back an hour after it was delivered. ‘It started right up and drives like it’s new again,’ he said. That’s the peace of mind we deliver—a part that works correctly the first time, every time.”
Guided Installation for Your 2006 SAAB 9-7X PCM
You don’t need to be a master mechanic to complete this job. With our pre-programmed module, the process is simplified. Follow these steps for a confident fix.
- Safety First: Begin by disconnecting the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the Module: On your 2006 Saab 9-7X, the PCM is typically found in the engine bay, on the driver’s side (LH engine). It’s a silver box with several large electrical connectors.
- Disconnect the Old Unit: Carefully unplug the wiring harnesses from the existing PCM. Most have a locking tab or lever that needs to be released first. Once disconnected, unbolt the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed PCM onto the bracket and securely tighten the bolts. Reconnect the wiring harnesses, ensuring they click firmly into place.
- Final Steps: Reconnect the negative battery terminal. In some cases, a security relearn procedure may be necessary, which typically involves turning the key to the ‘ON’ position for 10-15 minutes. Your vehicle’s manual will have specific instructions if needed. Start the engine and enjoy a smooth-running vehicle!
Tailored Fit for Your Ride
This module is a direct-fit replacement, guaranteed to be compatible with the following vehicles and part numbers. Please ensure your vehicle is on this list for a perfect match.
Part Numbers Replaced: 12569773, 12588650, 12589311, 12589585, 12591647, 12591648, 12593531, 12593532, 12594430, 12594431, 12596783, 12596784, 12597521, 12597776, 12597777, 12600818, 12604438, 12604439, 12606369, 12606373, 12606374, 12606398, 12606399, 19209820, 19209821
Compatible Models:
- 2006 SAAB 9-7X (4.2L 6-Cylinder)
- 2006 BUICK RAINIER (4.2L)
- 2004-2006 CHEVROLET COLORADO
- 2006 CHEVROLET TRAILBLAZER & TRAILBLAZER EXT (4.2L)
- 2004-2006 GMC CANYON
- 2006 GMC ENVOY & ENVOY XL (4.2L)
- 2006 HUMMER H3
- 2006 ISUZU ASCENDER (4.2L)
- 2006 ISUZU I-280 & I-350
Frequently Asked Questions
How do I provide my VIN number?
After completing your purchase, you can send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as it is essential for programming.
Is this module truly ‘plug and play’?
Yes, for the vast majority of vehicles. Because we program it to your VIN, it comes ready to install without needing a trip to the dealer. Some vehicles may require a simple security relearn procedure, which can be done at home in about 15 minutes with just your car key.
What if my original part number isn’t on the list?
The part numbers listed are the most common, but this module often replaces others as well due to hardware consolidation. If your vehicle make, model, and year match, please contact us with your VIN, and we can verify compatibility for you.
Do I need to return my old PCM (core)?
No core return is required for this part. You can keep your old module or dispose of it responsibly.
What kind of warranty comes with this part?
This part comes with a comprehensive warranty that covers any programming or hardware defects. Please see the warranty tab on our product page for full details and duration.