Restore Control and Reliability to Your 2006-2007 Monte Carlo

If you’re dealing with bizarre electrical problems in your Chevrolet Monte Carlo—like power windows with a mind of their own, flickering dashboard lights, or a security system that prevents your car from starting—you’ve likely met the frustrating symptoms of a failing Body Control Module (BCM). The BCM is the central nervous system for your car’s comfort and convenience features. When it fails, it can feel like your car is haunted. This isn’t just an annoyance; it can be a significant safety issue when exterior lights or security functions are compromised.

This is a direct-fit, VIN-programmed replacement Body Control Module for your 2006-2007 Monte Carlo BCM. Forget about expensive trips to the dealership for programming. We handle the critical software setup for you. Simply provide your vehicle’s VIN at checkout, and we’ll flash this module with the latest, most stable GM software specific to your car’s options. It arrives at your door ready for installation, making this a straightforward and cost-effective repair.

Is Your Monte Carlo Showing These Electrical Gremlins?

• ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
• ✔ Interior dome lights or exterior lamps staying on or not turning on.
• ✔ The anti-theft or security light is illuminated, causing a no-start condition.
• ✔ Erratic or non-functional instrument panel gauges.
• ✔ Remote keyless entry (RKE) system has stopped working.
• ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or other U-codes.
• ✔ A persistent “battery drain” that leaves you with a dead battery overnight.

Your Straightforward Monte Carlo BCM Installation Guide

1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait about 10 minutes to ensure all systems are powered down.
2. ✔ Locate the BCM: In your 2006-2007 Monte Carlo, the Body Control Module is located on the left (driver’s) side of the dash, attached to the steering column support bracket. You will need to remove the lower dash panel to access it.
3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
4. ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location and securely plug in all the electrical connectors. You should hear a ‘click’ as they lock into place.
5. ✔ Reconnect and Test: Re-install the dash panel, then reconnect the negative battery terminal. Turn the key to the ‘ON’ position and test all body functions—windows, locks, lights, and wipers—to confirm proper operation.

Important Post-Installation Steps

While this module is pre-programmed for your vehicle, some GM security and safety systems may require a handshake procedure after installation. This is normal. The most common procedures are:

• Airbag System Sync: If your airbag warning light is on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a capable scan tool. This syncs the new BCM with the airbag system.
• Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn might be necessary to ensure correct brake light operation and to prevent issues with the traction control system.

Verified Fitment for Your GM Vehicle

This BCM is a direct replacement for part number 25892622 and is interchangeable with a wide range of other part numbers. It fits the specified 2006-2007 Monte Carlo and many other GM vehicles. Please verify the location noted for your specific model:

This module also replaces the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.