Programmed 2005 Envoy TCM 24226863 | Transmission Control Module

End Your Transmission Headaches

Tired of harsh shifts, limp mode, or a persistent check engine light in your 2005 Envoy? This Transmission Control Module (TCM) is the solution. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, eliminating the need for a costly dealership visit. It’s a direct-fit replacement that restores smooth, reliable shifting. Provide your VIN at checkout and get back on the road fast!

$89.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-06961-31 Categories: ,
Guaranteed Safe Checkout

Restore Your Envoy’s Transmission Performance

If you’re dealing with the frustration of a transmission that’s shifting harshly, getting stuck in gear, or throwing a check engine light, you know how quickly it can ruin your driving experience. The Transmission Control Module (TCM) is the brain of your automatic transmission, and when it fails, it can cause a host of problems that can sideline your vehicle. This is a direct-fit, pre-programmed replacement Transmission Control Module for your 2005 GM vehicle, engineered to solve those issues and get you back on the road with confidence.

Unlike a standard replacement part that requires a trip to the dealership for expensive programming, this module arrives ready for installation. We take your vehicle’s VIN and flash the module with the latest, most stable software updates directly from GM. This critical step ensures perfect communication between the engine and transmission, restoring the precise, smooth shifting you expect from your vehicle. For anyone looking for a reliable fix for their 2005 Envoy TCM, this is the most efficient and cost-effective solution available.

From the Diagnostic Bay

I remember a 2005 Envoy XL with the 8-cylinder engine that came into my shop a few months back. The customer was frustrated, explaining it would slam into gear and sometimes feel like it was stuck in third. The check engine light was on, and his regular mechanic was stumped. I hooked up my scanner and immediately saw a U0101 code—Lost Communication with TCM. After verifying the wiring and power supply were good, I knew the module itself had failed internally. Instead of sending him to a dealership for a part and programming that would cost a fortune, we ordered one of these pre-programmed units. It arrived two days later, and the installation took less than 30 minutes. The moment I started it up, the communication code was gone, and the test drive confirmed it—shifts were buttery smooth. The customer saved hundreds of dollars and a ton of hassle.

Common Signs of a Failing TCM

  • ✔ Check Engine Light is illuminated
  • ✔ Transmission gets stuck in one gear (limp mode)
  • ✔ Harsh, erratic, or delayed shifting
  • ✔ Vehicle may not start or shift out of Park
  • ✔ Diagnostic Trouble Codes (DTCs) such as P0700, P0751, P0756, or U0101 (Lost Communication with TCM)
  • ✔ Poor fuel economy due to inefficient shifting

A Straightforward Guide to Installation

Installing your replacement 2005 Envoy TCM is a manageable job for a DIYer with basic tools. The module’s location can vary by model, but on the 8-cylinder Envoy, it’s typically found in the engine compartment on the driver’s side.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Locate the TCM: On the 2005 Envoy (8-cylinder), find the module mounted in the left-hand (driver’s side) of the engine compartment. On other models, it may be near the air cleaner housing or behind the strut tower.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. Press the release tabs firmly to avoid breaking them. Then, unbolt the module from its mounting bracket.
  4. Install the New Module: Mount the new TCM in the same location and secure it with the bolts. Reconnect the electrical harnesses, ensuring they click securely into place.
  5. Reconnect Power: Reattach the negative battery terminal. The vehicle may need to run for a few minutes for all systems to re-sync. No further programming is required.

Verified Vehicle Compatibility

This module is a direct replacement for part number 24226863 and is also compatible with the following part and service numbers: 24223112, 24233595, 24234189, 24239427, YBWW, YDFC, YDFD, YDLT, YJHY, YKTB, YKTF. It is guaranteed to fit the following 2005 models (and some 2004) with the specified options:

  • ✔ Allure (2005): With 3.6L engine, located at lower air cleaner housing
  • ✔ Cobalt (2005): Located behind LH strut tower
  • ✔ Corvette (2005): Located on LH frame rail
  • ✔ Envoy (2005): With 8-cylinder engine, located in LH engine compartment
  • ✔ Envoy XL (2005): With 8-cylinder engine, located in LH engine compartment
  • ✔ Envoy XUV (2005): With 8-cylinder engine, located in LH engine compartment
  • ✔ Grand Prix (2005): Located at lower air cleaner housing
  • ✔ GTO (2005): Transmission
  • ✔ Ion (2005): Located behind LH strut tower
  • ✔ LaCrosse (2005): With 3.6L engine, located at lower air cleaner housing
  • ✔ Pursuit (2005): Located behind LH strut tower
  • ✔ Rainier (2005): Transmission
  • ✔ Rendezvous (2004-2005): With 3.6L engine, located in air cleaner box
  • ✔ Trailblazer EXT (2005): With 8-cylinder engine, located in LH engine compartment

Stop letting a faulty module dictate how your vehicle drives. This pre-programmed 2005 Envoy TCM is the definitive solution to restore your transmission’s health and your peace of mind. Order today and experience the difference.

Why do you need my VIN?

Why do you need my VIN?

Your Vehicle Identification Number (VIN) allows us to program the module with the exact software calibration file from GM for your vehicle’s specific configuration (engine, transmission, and options). This ensures flawless communication and performance right out of the box.

Is this part truly plug-and-play?

Yes. Because we program it to your VIN before shipping, you do not need to take it to a dealer or mechanic for additional programming. Simply install it, and you’re ready to go. A security relearn procedure may be required on some models, which can typically be done without special tools.

Will this fix my transmission’s harsh shifting?

In the vast majority of cases, erratic or harsh shifting is caused by a failing TCM sending incorrect signals to the transmission solenoids. Replacing a faulty module with this correctly programmed unit is the most common and effective fix for these symptoms.

What happens if I don’t replace a bad TCM?

Continuing to drive with a failing TCM can lead to more severe transmission damage. Inconsistent hydraulic pressure and improper shifting can cause premature wear on clutches, bands, and other internal components, leading to a much more expensive repair down the line.

Is this compatible with other part numbers?

Yes, this module directly replaces several part numbers, including 24223112, 24233595, 24234189, and 24239427, among others listed in the description. It’s a comprehensive solution for a wide range of 2005 GM vehicles.

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

ENVOY

Make

Year

2005

Brand

GM

MPN

24226863

Manufacturer Part Number

Scroll to Top