Programmed 2004-2007 CTS ECM 19260507 | VIN-Matched Engine Control Module

Restore Your Engine’s Performance Instantly

Tired of a rough idle, stalling, or a persistent check engine light? This quality-tested, used ECM is the solution. It comes fully pre-programmed to your vehicle’s VIN, so you can skip the expensive dealership programming. It’s a direct-fit, reliable fix for your Cadillac or Buick. Get your car running smoothly again and order today!

$324.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07145-19 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Brain and Get Back on the Road with Confidence

Is your Cadillac, Buick, or SRX giving you headaches? Unexplained stalling, a persistent Check Engine Light, rough idling, or a sudden drop in fuel economy are classic signs that your vehicle’s Engine Control Module (ECM) is failing. As a technician with over two decades of experience, I’ve seen firsthand how a faulty ECM can create a cascade of confusing and frustrating problems. It’s the central computer of your engine, and when it malfunctions, nothing works as it should. This isn’t just an inconvenience; it can be a serious reliability issue.

This listing is for a dependable, tested, and pre-programmed ECM, a direct replacement for part numbers 19260507, 12592124, 12581144, and 12588472. We take the biggest hassle out of the repair process: programming. Simply provide us with your vehicle’s VIN during checkout, and our specialists will flash this module with the latest GM software specific to your car. This means no expensive trip to the dealership for programming. It arrives at your door ready for installation, making it a perfect solution for both seasoned mechanics and DIY enthusiasts looking for a straightforward fix.

From the Diagnostic Bay: The Ghost in the Machine

I remember a 2006 Cadillac CTS that came into my shop with a list of intermittent issues that had other mechanics stumped. The owner complained of random stalling at stoplights and occasional hard starting. There were no consistent trouble codes, just a history of random communication errors. We checked everything—fuel pressure, sensors, wiring harnesses. After hours of diagnostics, we decided to monitor the ECM’s internal data stream. We found that the processor would momentarily drop out, causing the engine to hiccup. It was a classic case of internal ECM failure that didn’t throw a clear code like a P0601. We replaced it with a pre-programmed module just like this one, and the ‘ghost’ was gone. The car ran perfectly, and the owner was relieved to have a reliable vehicle again. This is why a quality-tested 2004-2007 CTS ECM is often the key to solving the most elusive engine problems.

Is Your Engine Computer Causing These Headaches?

  • ✔ Check Engine Light is on, often with codes like P0601 (Internal Control Module Memory Check Sum Error) or P0606 (ECM/PCM Processor Fault).
  • ✔ Engine cranks but refuses to start.
  • ✔ Intermittent stalling or shutting off while driving.
  • ✔ Noticeable decrease in fuel efficiency.
  • ✔ Rough or unstable idle.
  • ✔ Poor engine performance and lack of acceleration.
  • ✔ Transmission shifting issues or communication errors with the TCM.

A Straightforward Guide to Installation

Installing your replacement 2004-2007 CTS ECM is a manageable job for someone with basic mechanical skills. Following these steps will ensure a smooth process.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 15 minutes to allow the system to fully discharge.
  2. Locate the ECM: On most compatible vehicles like the Cadillac CTS and SRX, the ECM is located in the engine compartment, typically on the passenger (RH) side. On Buick models like the LaCrosse and Allure, it’s often found in or below the air cleaner housing.
  3. Disconnect Connectors: Carefully release the locking tabs on the electrical wiring harnesses and gently pull them straight out from the ECM. Never force them. Inspect the connectors for any corrosion or damaged pins.
  4. Remove the Old Module: Unbolt the mounting hardware that secures the old ECM to its bracket or the vehicle body. Remove the old unit.
  5. Install the New Module: Mount your new, pre-programmed ECM in place and secure it with the original hardware.
  6. Reconnect Everything: Firmly plug the wiring harnesses back into the new ECM, ensuring they click and lock into place. Reconnect the negative battery terminal.
  7. Perform Security Relearn: Your vehicle’s anti-theft system may need to be relearned to the new ECM. This procedure is simple and typically involves turning the key to the ‘ON’ position for 10-15 minutes. Consult your owner’s manual for the specific steps for your model.

Verified Vehicle Compatibility

This module is a guaranteed fit for the following vehicles, provided the part number matches. Please verify your original part number or consult the fitment list below. This module, identified by part numbers 19260507 or 12592124, is the correct component for:

  • Cadillac CTS: 2004-2007 (Base models)
  • Cadillac SRX: 2004-2006 (with 3.6L engine)
  • Buick Allure: 2005-2008 (with 3.6L engine)
  • Buick LaCrosse: 2005-2008 (with 3.6L engine)
  • Buick Rendezvous: 2004-2006 (with 3.6L engine)

By purchasing this pre-programmed 2004-2007 CTS ECM, you are choosing a reliable and cost-effective path to restoring your vehicle’s performance and dependability.

Frequently Asked Questions

Why do you need my VIN?

Your Vehicle Identification Number (VIN) is essential for us to program the ECM with the exact software and calibrations your car requires. This ensures perfect compatibility with your engine, transmission, and factory options, making the installation process seamless.

Is this part really plug-and-play?

Yes, for the most part. Because we pre-program it to your VIN, you will not need a GM Tech II or other expensive scan tool for setup. However, you will likely need to perform a simple key-relearn procedure (often called a security relearn or Passlock relearn) so your vehicle’s anti-theft system recognizes the new computer. This can typically be done without any special tools.

This ECM is listed as used. Is it reliable?

Absolutely. Each module is sourced from a salvaged vehicle and subjected to rigorous testing to ensure it is fully functional and meets OEM standards. This provides a dependable, affordable alternative to a brand-new dealer part without sacrificing quality.

Will this fix my specific problem?

This ECM is a direct solution for failures related to the module itself, such as internal processor faults (P0601) or communication breakdowns. While it solves a wide range of issues, it’s always best to have a proper diagnosis to confirm the ECM is the source of the problem before ordering.

What if my original part number is slightly different?

This module is a direct replacement for several service numbers, including 12581144, 12588472, 12592124, and 19260507. As long as your original module carries one of these numbers, this part will be compatible with your vehicle.

Condition

Refurbished

Genuine OEM

Yes

MPN

19260507

Interchange part number

PartNumber

590

Model

CTS

Year

2004

Brand

GM

Manufacturer Part Number

, , ,

Hardware Type

Scroll to Top