Programmed 2004-2006 SRX ECM 12592124 | VIN Matched Engine Computer

Restore Your SRX’s Performance Instantly

Stop guessing and fix your 2004-2006 Cadillac SRX for good. This used ECM arrives pre-programmed to your vehicle’s VIN with the latest GM software. It’s a direct-fit solution for check engine lights, misfires, and no-start issues. No dealer visit required! Get back on the road fastโ€”order yours today!

$324.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07145-13 Categories: ,
Guaranteed Safe Checkout

Is Your Cadillac SRX Plagued by Engine Problems?

If you’re dealing with a persistent check engine light, rough idling, stalling, or even a no-start condition in your 2004-2006 Cadillac SRX, a failing Engine Control Module (ECM) is a very likely culprit. As the brain of your vehicle’s engine, when the ECM falters, it can cause a cascade of frustrating and difficult-to-diagnose issues. You’re not just buying a part; you’re buying a solution to get your luxury SUV running smoothly again.

This is a fully tested, genuine used GM ECM, part number 12592124, that arrives at your doorstep ready for installation. We take the hassle and high cost out of the repair by professionally programming the module to your vehicle’s specific Vehicle Identification Number (VIN) before we ship. This means no expensive trips to the dealership for programming or key relearning procedures.

Why Choose Our Pre-Programmed 2004-2006 SRX ECM?

Over my 20+ years in the shop, I’ve seen countless vehicle owners spend hundreds of dollars chasing ghostsโ€”replacing spark plugs, ignition coils, and sensorsโ€”only to find the ECM was the root cause all along. Our service is designed to eliminate that guesswork and provide a reliable, cost-effective fix.

  • โœ” VIN-Programmed for Your SRX: We flash the unit with the latest GM-certified software for your exact vehicle. Just provide your VIN at checkout.
  • โœ” True Plug-and-Play: Once installed, this module will integrate seamlessly with your SRX’s existing systems. In most cases, no further procedures are needed.
  • โœ” Solves Common 3.6L V6 Issues: Directly addresses symptoms like false misfire codes, erratic transmission shifting, and network communication errors.
  • โœ” Broad Compatibility: This ECM is a direct replacement for multiple service numbers, including 12581144, 12588472, 12592124, and 19260507.
  • โœ” Rigorously Tested: Sourced from salvaged vehicles, each module undergoes a thorough inspection and testing process to ensure full functionality.

Real-World Diagnostic Story

“A customer’s 2005 SRX came in last week with a persistent misfire code for cylinder 4 (P0304) that wouldn’t go away. They had already replaced the coil and spark plug twice. We checked the wiring and injector pulse with a noid light, which seemed weak. Instead of just replacing the injector, we scoped the driver circuit directly at the ECM connector. The signal was degraded. After installing one of our pre-programmed ECMs, the misfire was gone instantly. The original ECM’s injector driver had failedโ€”a common issue on these units that often gets misdiagnosed.”

Simple, Straightforward Installation

You don’t need to be a master technician to replace your 2004-2006 SRX ECM. With basic tools, you can have your vehicle back on the road in under an hour. The ECM on the SRX is conveniently located in the right-hand (passenger side) front of the engine compartment.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes to allow all systems to discharge.
  2. Locate the ECM: Open the hood and find the ECM on the passenger side of the engine bay. It’s a silver metal box with several large electrical connectors.
  3. Disconnect Connectors: Carefully release the locking tabs on the electrical harnesses and pull them straight out from the module. Never force them. Inspect the pins for any corrosion or damage.
  4. Remove the Old Module: Unbolt the mounting hardware holding the original ECM in place and remove it from the vehicle.
  5. Install the New Module: Mount your new, pre-programmed ECM in the same location and secure it with the original hardware.
  6. Reconnect Everything: Firmly plug the electrical connectors back into the new ECM until they click into place. Reconnect the negative battery terminal.
  7. Final Check: Start the engine. The check engine light should be off, and the engine should run smoothly. Your SRX is ready to drive!

Guaranteed Fitment Information

This module is a confirmed fit for the following vehicles, but please match your part number or consult with us if you are unsure. Providing your VIN is the best way to ensure 100% compatibility.

  • Cadillac SRX: 2004-2006 (with 3.6L engine)
  • Cadillac CTS: 2004-2007 (Base models, check ID)
  • Buick Allure: 2005-2008 (with 3.6L engine)
  • Buick LaCrosse: 2005-2008 (with 3.6L engine)
  • Buick Rendezvous: 2004-2006 (with 3.6L engine, check ID)

Don’t let a faulty computer keep your Cadillac parked. Order this pre-programmed 2004-2006 SRX ECM today and restore the performance and reliability you expect.

Condition

Refurbished

Genuine OEM

Yes

MPN

12588472

Interchange part number

PartNumber

590

Model

SRX

Year

2004

Brand

GM

Manufacturer Part Number

, , ,

Hardware Type

Scroll to Top