2003 – 2007 – Body Control Module 15198115 Programmed To Your VIN BCM

Restore Your GM’s Electrical System

Fix frustrating electrical issues in your Silverado, Sierra, Express, or Savana with this Body Control Module. It comes pre-programmed to your vehicle’s VIN for a simple, direct-fit installation. Solves problems with power windows, locks, and lights. Fix your GM’s electrical issues today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01129-76 Categories: ,
Guaranteed Safe Checkout

Is Your GM Truck or Van Acting Possessed?

Are you chasing electrical gremlins in your Silverado, Sierra, Express, or Savana? One minute the dome light won’t turn off, the next the power windows have a mind of their own, and the security light is flashing for no reason. These aren’t separate problems; they’re classic symptoms of a failing Body Control Module (BCM). The BCM is the nerve center for your vehicle’s body electronics, and when it starts to fail, it can cause a cascade of frustrating and unpredictable issues.

Stop Guessing and Start Driving. This is Your Solution.

This isn’t just a replacement part; it’s a complete, ready-to-install solution for your vehicle. We take a genuine GM BCM and program it specifically to your vehicle’s VIN before we ship it. This means it arrives at your door with the latest GM software updates, ready to communicate perfectly with your truck or van’s existing systems.

  • Fix Erratic Electronics: Restore proper function to your power windows, door locks, interior/exterior lighting, and security system.
  • Eliminate False Warnings: Clear persistent, incorrect warning lights on your dash caused by a faulty BCM.
  • VIN-Programmed for You: We flash the module to your specific vehicle, ensuring seamless integration. No expensive trip to the dealer for programming is required.
  • Direct Replacement: This module is a direct fit for multiple part numbers, including 15198115, 15167329, 15194169, and more.

From the Shop Floor: A Real-World Diagnosis

“A customer’s 2005 Silverado 2500 came in last week with a laundry list of complaints: the radio would cut out, the driver’s power window worked intermittently, and the horn would chirp randomly when locking the doors. He had already replaced the window switch and checked fuses. After connecting my scan tool, I saw multiple communication loss codes with various modules. This is a tell-tale sign. In my 20+ years, I’ve learned that when you have multiple, unrelated electrical issues, the BCM is the prime suspect. We installed a VIN-programmed BCM, and every single issue was resolved instantly. It’s a common failure point, but with a pre-programmed unit, it’s a straightforward fix.”

Easy Installation for the DIYer

You can get your truck or van back to 100% without paying for expensive dealership labor. The BCM is typically located under the steering column (for trucks) or in the center of the dash (for vans).

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery.
  2. Locate the BCM: Access the module by removing the necessary dash panels. It’s a black plastic box with several large electrical connectors.
  3. Swap the Module: Carefully unplug the wiring harnesses from the old BCM. Unbolt or unclip the module from its bracket and remove it.
  4. Install the New BCM: Mount your new, pre-programmed BCM in place and securely reconnect all wiring harnesses. You’ll hear a click as they lock in.
  5. Reconnect & Test: Reconnect the battery terminal. Turn the key to the ‘On’ position and test your lights, locks, and windows to confirm functionality.

Important Final Steps After Installation

To ensure full system functionality and safety, a couple of final procedures are required after you install your new 2003-2007 GM BCM. These steps require a professional-grade diagnostic scan tool.

  • Airbag System Reset: The airbag warning light will likely be on. You must perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the new BCM with the airbag system and turn off the light.
  • Brake Pedal Position Sensor: Some vehicles may require a ‘Brake Pedal Position Sensor Calibration’ to ensure the brake lights and stability control systems function correctly.

Note: If you are not comfortable performing these final steps, we strongly recommend seeking assistance from a qualified local mechanic.

Guaranteed Compatibility

This 2003-2007 GM BCM is a direct replacement for a wide range of GM trucks and vans. Simply provide your VIN at checkout, and we’ll handle the rest. It is compatible with part numbers: 15167329, 15194169, 15747545, 15136224, 15116065, 15198115, 15136876, and 10367689. Please check the fitment list to confirm your specific model and year.

Conditions & Options

Programmed to your VIN GM: 15136876

Genuine OEM

Yes

MPN

15198115

Interchange part number

Condition

Refurbished

PartNumber

591

Model

BRAVADA

Make

Year

2003

Brand

GM

Manufacturer Part Number

Scroll to Top