Restore Your Yukon’s Electrical System with a Plug-and-Play BCM
Are you dealing with frustrating electrical problems in your GMC Yukon? Flickering lights, unresponsive power windows, or a malfunctioning HVAC system can make your trusted SUV feel unreliable. These are classic signs of a failing Body Control Module (BCM). This VIN-programmed BCM is the definitive solution, engineered to restore your vehicle’s core functions and get you back on the road with confidence. It’s designed specifically as a direct replacement for your 2003-2006 GMC Yukon Body Control Module, eliminating the guesswork and the need for expensive dealership programming.
Common Symptoms & Your Solution
A faulty BCM can cause a wide range of confusing issues. If you’re experiencing any of the following, this module is your solution:
- Intermittent or non-working power windows, door locks, or interior/exterior lights.
- HVAC controls that don’t respond or a blower motor that works sporadically.
- An airbag warning light that stays on, often with diagnostic trouble codes (DTCs) like B1001.
- Security system malfunctions that may lead to a no-start condition.
- A variety of seemingly unrelated electrical gremlins that come and go.
Replacing your old unit with our pre-programmed 2003-2006 GMC Yukon Body Control Module directly addresses these problems, restoring the communication network that controls these essential components.
Features & Benefits
- ✔ Effortless Plug-and-Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. Simply disconnect the old BCM and plug this one in—no dealership visit required, saving you time and hundreds of dollars in programming fees.
- ✔ Restores Full Functionality: Regain complete and reliable control over your Yukon’s power windows, door locks, lighting, wipers, security system, and HVAC functions.
- ✔ Engineered for Reliability: Built to meet or exceed original equipment standards, ensuring dependable performance and long-lasting durability for your daily driver or workhorse vehicle.
- ✔ Guaranteed Performance: This unit is backed by our one-year replacement warranty. Drive with the assurance that your investment is protected.
- ✔ Broad Compatibility: A direct replacement for a wide range of part numbers, including 15136877, 15116066, 15136225, 15198116, and more, ensuring a perfect fit for your specific GM truck or SUV.
Expert Insight: The GMT800 BCM Solution
The GM GMT800 platform, which includes your 2003-2006 Yukon, is legendary for its durability. However, after nearly two decades, the original Body Control Modules are a common failure point. The complex electronics can degrade, leading to frustrating issues that are difficult to diagnose. In the past, a replacement meant a costly part from the dealer plus a separate charge for programming. Our VIN-programmed BCMs change the game for owners. It’s the most efficient and cost-effective way to solve these electrical problems, empowering you to perform a professional-level repair right in your own driveway.
By providing us with your VIN during checkout, you ensure that the 2003-2006 GMC Yukon Body Control Module you receive is perfectly matched to your vehicle’s factory settings. Installation is straightforward, typically taking just a few minutes with basic tools.
Frequently Asked Questions
What does a Body Control Module do on a GMC Yukon?
The BCM acts as the central computer for your vehicle’s body electronics. It manages non-engine related functions like power windows, door locks, the security system, interior and exterior lights, wipers, and the climate control system.
Is this BCM difficult to install myself?
No, installation is designed to be simple for a DIYer. The BCM is typically located under the steering column. The process involves disconnecting the battery, unplugging the electrical connectors from the old module, removing it, and installing the new one. The entire process often takes less than 15 minutes.
Will this part need to be programmed by a dealer?
Absolutely not. The main benefit of this module is that we pre-program it to your vehicle’s VIN before shipping. It arrives ready for a plug-and-play installation, saving you the time, cost, and hassle of a dealership visit.
What happens if my airbag light is still on after installation?
In some cases, if an airbag-related code was stored, the new BCM may need to be synced with the airbag system (SDM). This is done with a procedure called ‘Setup SDM Primary Key in BCM’ using a professional-grade scan tool. This is only necessary if the airbag light remains on after the BCM is installed.
Do I need to send my old part back?
No, there is no core charge for this part. You can keep your old module without any extra fees or hassle.
How do I know this is the correct part for my truck?
This module is a direct replacement for part number 15136877 and fits 2003-2006 GMC Yukon models. It also interchanges with many other GM part numbers. Providing your VIN at checkout is the best way to guarantee we send you the exact, correctly programmed module for your vehicle.