Programmed 2003-2006 Escalade EXT PCM 12602802 | VIN Matched

Restore Your Escalade EXT’s Performance

Fix check engine lights, stalling, and no-start issues with this VIN-programmed PCM for 2003-2006 Escalade EXT models. It arrives flashed with the latest GM software, ready for a simple, plug-and-play installation. No dealer visit required! Get back on the road fastโ€”order today!

$114.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07633-186 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your Truck with a VIN-Programmed 2003-2006 Escalade EXT PCM

Is your Cadillac Escalade EXT, or another compatible GM truck, suddenly giving you headaches? If you’re dealing with a persistent Check Engine Light, unpredictable stalling, rough idling, or a frustrating no-start condition, the problem often points directly to a failing Powertrain Control Module (PCM). As the central computer for your engine and transmission, when the PCM falters, the entire vehicle’s performance suffers. This isn’t just an annoyance; it’s a critical failure that needs a reliable solution.

From the Shop Floor: A Real-World Diagnosis

A customer’s ’05 Escalade EXT came into my shop last month. It would crank but not start, and when it did, it ran rough and threw a dozen unrelated codes for various sensors. After checking the basicsโ€”fuel pressure, sparkโ€”we traced it back to a failed PCM driver for the ignition coils. It’s a classic failure mode for these P59 controllers, often caused by years of heat cycles and vibration. Replacing the module with a properly programmed unit solved every single issue instantly.

The Direct Solution: A Pre-Programmed Escalade EXT PCM

Forget expensive dealership visits and the hassle of finding a local shop with the right equipment. We provide a straightforward, effective solution. This PCM, part number 12602802, arrives at your door programmed specifically for your vehicle using your VIN. We load it with the latest official GM software updates, which often correct factory bugs and improve drivability. This is the most efficient way to get your truck back to factory-spec operation.

Key Features & Benefits:

  • โœ” VIN Programmed: We flash the module with your vehicle’s exact VIN, ensuring perfect compatibility with its options and systems.
  • โœ” Latest GM Software: Your PCM comes loaded with the newest calibrations from General Motors for optimal performance and efficiency.
  • โœ” No Dealer Visit Required: This is a true plug-and-play solution. Once installed, you’re ready to go, saving you time and hundreds in dealer programming fees.
  • โœ” Solves Common Issues: Directly addresses problems like false sensor codes (P0101, P0300, etc.), harsh shifting, poor fuel economy, and intermittent stalling.
  • โœ” Broad Compatibility: This module is a direct replacement for a wide range of popular GM trucks and SUVs from 2003-2007.

Plug-and-Play Installation: Get Back on the Road Fast

Installing your new PCM is a job most DIY mechanics can handle in under an hour with basic hand tools. Follow these steps for a smooth installation.

  1. Safety First: Always disconnect the negative battery terminal and wait at least 15 minutes for the system capacitors to discharge.
  2. Locate the PCM: On most compatible trucks like the Escalade, Silverado, and Sierra, the PCM is located under the hood on the driver’s side, near the battery, inside a black plastic bracket.
  3. Disconnect the Harnesses: Carefully lift the locking tabs and unplug the wiring harnesses from the old module. Inspect the connectors for any signs of corrosion or bent pins. Clean them with electrical contact cleaner if necessary.
  4. Swap the Modules: Remove the old PCM from its bracket and install the new one.
  5. Reconnect Everything: Securely plug the wiring harnesses into your new PCM, ensuring the locking tabs click into place. Reconnect the negative battery terminal.
  6. Security Relearn Procedure: After installation, you must perform a simple security relearn (often called a CASE relearn or anti-theft relearn). This procedure typically involves turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating two more times. This allows your vehicle’s anti-theft system to recognize the new module. Your truck will not start until this is completed.

Confirming Your Part Number

This PCM is a direct replacement for several service numbers. To ensure compatibility, check the sticker on your current module. This part replaces:

  • 89017750
  • 12582605
  • 12589463
  • 12602802
  • 89017734
  • 28042802

Don’t let a faulty computer keep your powerful GM truck parked. Order your VIN-programmed PCM today and restore the reliability and performance you depend on.

MPN

12602802

Conditions & Options

12589463

Genuine OEM

Yes

Condition

Refurbished

PartNumber

590

Model

ESCALADE EXT

Make

Year

2003 – 2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , ,

Interchange part number

Scroll to Top