Restore Full Electrical Function to Your GM Truck
Are you battling frustrating electrical problems in your 2001 GM truck? Issues like flickering lights, unresponsive power windows and locks, a security system that acts up, or strange warnings on your dashboard are often symptoms of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of confusing and intermittent problems. This replacement BCM is the definitive solution to get your truck’s features working reliably again.
Is Your Body Control Module Failing?
A faulty BCM can make your vehicle feel unreliable. Look out for these common signs of failure. If you’re experiencing several of these issues, there’s a strong chance your BCM is the culprit.
- ✔ Erratic power windows, door locks, or mirrors
- ✔ Interior dome lights or exterior lights not working correctly
- ✔ Horn honking unexpectedly or not working at all
- ✔ Intermittent no-start conditions linked to the security system
- ✔ Instrument cluster gauges behaving erratically
- ✔ Problems with the heating and A/C controls
- ✔ “Service Vehicle Soon” or security warning lights illuminated
A True Plug-and-Play Solution
The biggest hurdle in replacing a BCM is the need for expensive, dealer-specific programming. We eliminate that step for you. Simply provide us with your vehicle’s 17-digit VIN during checkout, and our technicians will program this module with the latest GM software specific to your truck. This ensures that when the part arrives, it’s ready for installation without the need for a trip to the dealership. This service is included with your purchase and makes for a much simpler repair process. This is the most efficient way to get a replacement 2001 Yukon Body Control Module.
Installation and Post-Install Considerations
After installing your pre-programmed 2001 Yukon Body Control Module, a couple of additional steps, known as relearn procedures, may be necessary to ensure all systems communicate correctly. These are standard procedures after a BCM replacement.
- Airbag System Sync: If your airbag warning light is on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a compatible scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure proper brake light operation and to satisfy the traction control system.
Please note: While this module is programmed for your vehicle, specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
This part is a direct replacement for the following part numbers:
09375899, 9392990, 09370249, 19180223
Guaranteed Fitment for the Following Vehicles:
This BCM is confirmed to fit 2001 models of the GMC Yukon, Yukon XL, Sierra 1500/2500/3500, and Chevrolet Tahoe, Suburban 1500/2500, and Silverado 1500/2500/3500 with the corresponding options and part numbers.
Frequently Asked Questions
What information do you need to program the BCM?
We need your vehicle’s 17-digit Vehicle Identification Number (VIN). Please provide it during or after checkout so we can program the module before shipping.
Is this part difficult to install?
The BCM is typically located under the driver’s side dashboard. The physical replacement is straightforward for someone with basic mechanical skills. However, as noted, some post-installation electronic relearn procedures may be required with a professional scan tool.
Do I need to return my old BCM?
No, there is no core charge for this part. You can keep your original module.
Will this fix my airbag light?
If the airbag light is on due to a fault in the old BCM, this part will resolve the root cause. However, you will still need to perform the ‘Setup SDM Primary Key in BCM’ procedure with a scan tool to sync the systems and turn off the light after installation.
Is this a new or used part?
This is a high-quality, tested replacement part guaranteed to restore your vehicle’s functionality. It is programmed with the latest software from GM for your specific VIN.