Programmed 2001-2003 Venture Powertrain Control Module | ECM PCM | 09360210

Restore Your Venture’s Performance

Tired of stalling, poor fuel economy, and a persistent check engine light? This Powertrain Control Module (PCM) is the solution. It arrives fully programmed to your vehicle’s VIN with the latest GM software, eliminating the need for expensive dealership visits. It’s a direct-fit, reliable fix for your 2001-2003 Venture. Order today for a plug-and-play solution!

$74.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-03160-15 Categories: ,
Guaranteed Safe Checkout

Restore Your Minivan’s Performance and Reliability

Is your 2001, 2002, or 2003 Chevrolet Venture running rough, stalling unexpectedly, or showing a persistent Check Engine Light? These are classic signs of a failing Powertrain Control Module (PCM), the central computer that manages your engine’s performance, fuel economy, and emissions. A faulty PCM can cause a cascade of frustrating issues that are often difficult to diagnose. Instead of paying for expensive dealership programming and diagnostics, get a dependable solution that arrives ready for installation.

This isn’t just a replacement part; it’s a complete, plug-and-play fix. We professionally program this module with the latest GM software updates specifically for your vehicle’s VIN. This critical step ensures all systems communicate correctly, restoring the smooth operation and efficiency you expect from your Venture. By eliminating the need for a separate programming service, you save significant time, money, and hassle.

From the Diagnostic Bay: The Intermittent Stall Case

I remember a customer with a 2002 Venture who was at his wit’s end. The van would run perfectly for days, then suddenly stall at a stoplight and refuse to restart for 10-15 minutes. There were no consistent trouble codes, just a history of random communication errors. After checking all the usual suspects—fuel pump, crank sensor, ignition system—we focused on the PCM. On these GM platforms, I’ve seen internal circuit board failures in the PCM cause this exact type of heat-related, intermittent failure. We installed a pre-programmed module, and the problem vanished instantly. It’s a textbook example of how a failing computer can mimic a dozen other mechanical issues.

Common Symptoms of a Failing PCM

If you’re experiencing any of the following, a faulty PCM could be the culprit. Replacing it with our correctly programmed 2001-2003 Venture Powertrain Control Module is often the most direct fix.

  • ✔ Check Engine Light is illuminated
  • ✔ Engine stalling or misfiring for no apparent reason
  • ✔ Poor or erratic automatic transmission shifting
  • ✔ A noticeable drop in fuel economy
  • ✔ The vehicle fails to start (no-crank or crank-no-start)
  • ✔ Communication-related Diagnostic Trouble Codes (DTCs) such as P0601, P0606, or U-series codes.

A Straightforward Guide to Installation

Installing your new PCM is a manageable job for a confident DIYer. Following these steps will help ensure a smooth process. Always consult a vehicle-specific repair manual if you are unsure about any step.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes for the system capacitors to discharge.
  2. Locate the Module: On the Venture, the PCM is typically found in the engine compartment on the driver’s side, often attached to or near the air filter housing.
  3. Disconnect the Connectors: Carefully release the locking tabs on the electrical wiring harnesses and gently pull them straight out from the module. Do not force them.
  4. Remove the Old Module: Unbolt the old PCM from its mounting bracket. Keep the hardware, as you will need it for the new module.
  5. Install the New Module: Mount your new, pre-programmed PCM onto the bracket and secure it with the original hardware.
  6. Reconnect Everything: Firmly plug the wiring harnesses back into the new module until they click into place. Reconnect the negative battery terminal.
  7. Final Step: Some vehicles may require a security relearn procedure, which typically involves cycling the key in the ignition. Your vehicle’s manual will have the specific steps if needed.

Verified Vehicle Compatibility

This module, part number 09360210, is a direct replacement for several original equipment part numbers, including 12209614 and 12202600. It is guaranteed to fit the following vehicles (please verify your specific options):

  • Alero: 2001-2003 (3.4L)
  • Aurora: 2001-2002 (3.5L)
  • Aztek: 2001-2003
  • Century: 2001-2002
  • Grand Am: 2001-2003 (3.4L)
  • Grand Prix: 2001-2003 (3.1L)
  • Impala: 2001-2003 (3.4L)
  • Intrigue: 2001-2002
  • Lumina Car: 2001
  • Malibu: 2001-2003
  • Montana: 2001-2002
  • Monte Carlo: 2001-2003 (3.4L)
  • Regal: 2000-2002
  • Rendezvous: 2002-2003
  • Silhouette: 2001-2002
  • Venture: 2001-2003

This 2001-2003 Venture Powertrain Control Module is the definitive solution to get your vehicle back on the road, running as it should. Don’t let a faulty computer keep you stranded.

Frequently Asked Questions

2001-2003 Venture Powertrain Control Module

What does ‘programmed’ mean?
Programming, or ‘flashing’, installs the correct factory software for your vehicle’s engine, transmission, and options. Our service ensures this works seamlessly with your vehicle right out of the box.

Condition

Refurbished

Year
MPN

09360210

Conditions & Options

Programmed to your VIN GM: 12209614

Genuine OEM

Yes

PartNumber

590

Model

VENTURE

Year

2003

Brand

GM

Manufacturer Part Number

, ,

Interchange part number

Scroll to Top