Restore Full Functionality to Your GM Truck or SUV
Is your 2000-2001 GM vehicle plagued by bizarre electrical issues? Power windows with a mind of their own, dashboard lights flashing erratically, or a security system that prevents you from starting your engine? These are classic symptoms of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it malfunctions, it can create a cascade of frustrating and seemingly unrelated problems. This replacement 2000 GM Body Control Module, service number 09385236, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
Unlike a standard replacement part from a salvage yard or local parts store, this module is not just a piece of hardware. It’s a complete, ready-to-install solution. Before we ship it, we flash the module with the latest official GM software and program it specifically to your vehicle’s unique Vehicle Identification Number (VIN). This critical step ensures that the BCM correctly communicates with all other modules and recognizes the specific options and features your vehicle was built with, eliminating the need for an expensive and time-consuming trip to the dealership for programming.
Is Your Body Control Module Failing?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following issues, a failing BCM is the most likely culprit. This programmed 2000 GM Body Control Module is designed to resolve these exact problems.
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior dome lights or exterior parking lights staying on or not turning on at all.
- ✔ The horn sounding randomly or failing to work when pressed.
- ✔ The vehicle’s anti-theft or security system activating incorrectly, causing a no-start condition.
- ✔ Wipers operating intermittently or not parking in the correct position.
- ✔ Inaccurate or dead gauges on the instrument panel.
- ✔ Diagnostic trouble codes (DTCs), especially U-codes, indicating a loss of communication with other modules.
The Plug-and-Play Advantage
Our process is simple and designed to get you back on the road quickly. Once you place your order, you provide us with your vehicle’s VIN. Our technicians then use this information to load the correct software and vehicle-specific configuration onto the BCM. The module you receive will be a direct-fit replacement, ready for installation. In most cases, the physical swap is straightforward, typically located behind the lower-left portion of the dashboard. While the unit is plug-and-play for most functions, some vehicles may require simple post-installation relearn procedures.
Post-Installation Information
After installing your new BCM, a couple of additional steps may be necessary depending on your specific model and how the systems respond:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the new BCM with the airbag control module and requires a professional-grade diagnostic tool.
- Brake Pedal Position Relearn: To ensure proper brake light operation and traction control functionality, a brake pedal position sensor recalibration might be required.
Always consult a factory service manual or a qualified technician for guidance on these procedures.
Guaranteed Compatibility
This module is a direct replacement for service numbers 09385236, 19208539, and 9371990. It is compatible with a wide range of 2000 and 2001 GM trucks and SUVs, including the Chevrolet Silverado, Tahoe, Suburban, S10, Blazer, Astro and GMC Sierra, Yukon, Yukon XL, Jimmy, Safari, and Oldsmobile Bravada. By programming to your VIN, we ensure it’s a perfect match for your vehicle’s factory-installed options.
Frequently Asked Questions
Why do I need to provide my VIN?
Your VIN is essential. It allows us to program the BCM with the exact software and settings for your vehicle’s specific features, such as power seat options, security system type, and lighting packages. This ensures seamless integration and proper function.
Is this part truly plug-and-play?
Yes, for the vast majority of functions, it is. The VIN programming handles the complex setup. However, as noted, some vehicles may require a simple relearn procedure for the airbag or brake systems, which can sometimes be done with a high-end scan tool.
Will this fix my ‘Security’ light and no-start problem?
In most cases, yes. The factory anti-theft system (Passlock/VATS) is controlled by the BCM. By programming the module to your VIN, we align it with your vehicle’s existing security components, which typically resolves these issues.
Do I need to return my old BCM?
No, there is no core charge for this part. You can keep your original module.
Where is the BCM located on my truck?
On most compatible models like the Silverado, Sierra, and Tahoe/Yukon, the BCM is located under the driver’s side of the dashboard, to the left of the steering column. On S10/Blazer models, it is often found in the center dash area.