Restore Full Electrical Control to Your GM SUV or Truck
Are you dealing with frustrating and unpredictable electrical issues in your 1998 Bravada, Blazer, or S10? Flickering lights, malfunctioning power windows and locks, or a security system that acts up on its own are all classic signs of a failing Body Control Module (BCM). This critical component is the central hub for your vehicle’s body electronics, and when it fails, it can make your daily drive a nightmare. Stop chasing electrical gremlins and get the definitive solution with our professionally programmed 1998 Oldsmobile Bravada Body Control Module, ready for installation right out of the box.
Common Symptoms & Your Solution
A faulty BCM can manifest in numerous ways, often seeming like multiple unrelated problems. If you’re experiencing any of the following, this module is your answer:
- Intermittent or non-working power windows, door locks, or mirrors.
- Erratic interior or exterior lighting behavior.
- Problems with the radio or climate control functions.
- The security system engaging randomly or preventing the vehicle from starting.
- Warning lights on the dash with no apparent cause.
Our service eliminates the guesswork. We take a quality-inspected BCM and flash it with the latest official GM software, specifically matched to your vehicle’s unique VIN. This ensures perfect communication between all your vehicle’s systems, restoring the reliable performance you depend on.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: No need for an expensive trip to the dealership. This module arrives pre-programmed and ready to install, saving you time and money.
- ✔ Restores Full Functionality: Get your power accessories like windows, locks, and lights working reliably again.
- ✔ Direct-Fit Replacement: Engineered to replace OEM part numbers 09366803, 16264870, 16268395, and 8162683950 for a perfect fit.
- ✔ No Core Charge: We make the process simple. There’s no need to send your old, faulty module back to us.
- ✔ Updated Software: Your module is loaded with the newest updates from GM, often correcting factory bugs and improving performance.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight: The DIY-er’s Advantage
As a technician, I’ve seen countless owners of vehicles like the ’98 Bravada or S10 go to a salvage yard for a used BCM. The problem? A used module is a lottery. It has the wrong VIN, might have the same faults as your old one, and will still require expensive programming at a shop. Our solution bypasses that entire headache. By programming the module to your VIN before shipping, we provide a part that integrates seamlessly, just like the original, but with the benefit of the latest software updates. It’s the smartest, most reliable way to get your truck back on the road.
Post-Installation Information
After installing your new 1998 Oldsmobile Bravada Body Control Module, some vehicles may require a simple sync procedure. If the airbag warning light is on, a scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ function. Additionally, a brake pedal position sensor relearn might be necessary. These are standard procedures for many shops and ensure all safety systems are communicating correctly. Always consult a service manual or a qualified technician for specific guidance.
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, simply reply to your order confirmation email with your vehicle’s 17-digit VIN, or send it to us through our website’s contact form with your order number. We cannot ship your part until we receive this information.
Is this a difficult part to install?
The BCM on these models is typically located in the center dash area. For someone with moderate DIY mechanical skill, it’s a manageable job. The key benefit of our product is that the complex programming is already done, making the physical swap the main task.
What does the Body Control Module (BCM) actually do?
The BCM acts as the central computer for your vehicle’s electronic comfort and convenience features. It controls functions that aren’t related to the engine, such as power windows, interior lights, door locks, the security system, and the radio.
Will this fit my 1998 Chevy S10?
Yes, this BCM is compatible with the 1998 Chevy S10, GMC Sonoma, GMC Jimmy S15, Isuzu Hombre, and Oldsmobile Bravada, provided the original part number matches one of those listed (e.g., 16268395, 9366803). Providing your VIN ensures we program it correctly for your specific make and model.
What if my airbag light comes on after installation?
This is a known possibility. The new BCM needs to be electronically introduced to the airbag system’s computer (SDM). A repair shop with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure in a few minutes to sync the systems and turn off the light.